• 한국치위생학회지
• /
• 제22권6호
• /
• pp.467-475
• /
• 2022

Objectives: This study aimed to understand the definitions, types, and principles of computer-aided design/computer-aided manufacturing (CAD/CAM) and scanners due to the introduction of digital workflows. Methods: This study was based on information from the government's law and articles published in academic journals. Results: CAD/CAM is a technology that measures the shape three-dimensionally, saves it as data, designs it into the desired shape, and processes the product. Scanners, which are classified as intraoral and extraoral scanners, measure teeth and the intraoral environment three-dimensionally and convert them into three-dimensional (3D). A 3D printer is a machine that creates a 3D object by layering materials based on a 3D drawing. It can be classified into four types according to the method: extrusion, powder bonding, lamination, and photopolymerization methods. The most used 3D printer methods in dentistry are stereolithograhpy and digital light processing, and they are widely used in prosthetic, surgical, and orthodontic fields. Conclusions: As the dental system is digitized, it is expected that the government will classify the dental hygienist scope of work and the universities will reflect the curriculum; it is necessary to develop excellent dental hygienists, diversify the educational pathways, and establish policies to meet the needs of the increasing number of patients.

• 국제학술발표논문집
• /
• The 10th International Conference on Construction Engineering and Project Management
• /
• pp.1283-1283
• /
• 2024

Recently, construction sites have faced significant challenges due to arbitrary changes and poor communication between general contractors and subcontractors. This study proposes a technological solution by integrating Unmanned Ground Vehicles (UGVs) into the existing workflow of apartment construction. By analyzing current processes, we identified a scenario where UGVs, equipped with LiDAR (Light Detection and Ranging) systems, can generate and provide real-time 3D models of construction sites. These models can be linked with extended reality (XR) technology or office PCs for intuitive comparisons between digital and actual site conditions as a digital twin of the construction site. The study suggests an improved construction process that enhances contractors' understanding and on-site efficiency and enables managers to monitor progress effectively. To address challenging terrain on construction sites, a caterpillar driven UGV was developed, equipped with stereo cameras, a LiDAR sensor for scanning and gathering environmental data, and an embedded PC for data processing. Utilizing SLAM (Simultaneous Localization and Mapping) technology, the UGV autonomously navigates and scans the site at night, minimizing disruptions. Additionally, an embedded system analyzes images from stereo cameras to assess the quality of construction, mapping the findings onto 3D models. This innovation allows site managers to efficiently verify construction quality and identify issues without manual inspections, significantly improving site management efficiency.

• 동의생리병리학회지
• /
• 제29권4호
• /
• pp.289-294
• /
• 2015

In order to make digital processing of facial color, standardization methods of photographing and observational requirements and gloss-detecting are done through preceding papers and actual experiences. Examiner's observational informations should be contained with original and temporary color, normalcy and deviation range and gloss. And these are interrelated with time, interior and exterior temperature, emotional state, so should be recorded too. Picturing procedure should be controlled in simple and practical but objective way. Just water cleansing, 15 to 20 minute resting, prohibiton of moisturizing of examinee are common for examiner. Temperature and moisture, width, light source requirement, brightness, polarizing filter of parlor and camera-to-object distance, posture of examinee are should be recorded. In addition, pre and post-revision of color and manifestation of color space after taking images are needed coping with construction of diagnostic database.

• 한국통신학회논문지
• /
• 제25권7A호
• /
• pp.1050-1056
• /
• 2000

본 논문에서는 디지털 카메라를 통해 얻어진 자동차 영상으로부터 이산코사인변환 (Discrete Cosin Transform : DCT) 과 코렐레이션(Correlation)를 이용한 자동차번호판 영역추출방법을 제안한다. 번호판은 문자와 문자의 배경으로 이루어져 있고 번호판 영역이 직사각현으로 되어있다는 특징을 이용하여 자동차영상을 DCT처리하여 수직, 수평성분만을 추출한 후 이 수직, 수평 성분을 가지는 영상에서 코릴레이션(Correlation)을 이용하여 번호판영역을 추출한다. 추출된 번호판영역은 투영 히스토그램(Histogram)에 의해서 번호판영역내에 있는 문자들을 분리한다. 기존의 방법과 비교하여 날씨가 흐리거나 너무 밝거나 밤에 찍은 영상들에 대해서도 우수한 번호판영상을 추출할 수 있었다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2013년도 추계학술발표대회
• /
• pp.1709-1712
• /
• 2013

교통 신호등은 운전자 혹은 보행자들의 뚜렷한 시인성 확보를 위해 가능한 주위 배경과 구분되는 색상, 모양, 질감 등으로 구성하여 설치되어 있는 특징을 가지고 있다. 결국 기존 교통 신호등 검출 연구들에서는 대부분 교통 신호등의 색상과 모양을 기반으로 한 검출 연구가 주류를 이루고 있는 것이 사실이다. 하지만, 외부 날씨, 복잡한 시내, 다른 물체와의 겹침 등의 문제로 인해 색상 및 모양 기반의 교통 신호등, motion blur, 검출 오류가 증가 되고 있다. 따라서 본 연구에서는 입력 영상에서 색상정보를 배제하고 motion blur나 밝기 변화에 덜 민감하고 먼 거리에서도 뛰어난 시인성을 가진 spot light 검출을 통해 입력 영상에서 가장 밝은 교통표지판 후보 영역들을 검출한다. 그리고 교통 신호등의 특징인 가능한 원형을 유지하고 있으며 원형 외부 색상과 내부 색상이 현저하게 두드러지는 영역을 maximally stable extremal regions (MSER) 알고리즘을 사용하여 입력 영상에서 후보 영역을 선택한다. 마지막으로, 검출된 영역들에서 교통 신호등 영역을 검출하기 위해 템플릿 매칭 방법을 적용한다. 제안한 방법을 도로 상에서 실험한 결과, 평균 94% 이상의 검출율을 제시하였고, 특히 야간 시간대에 검출율이 비교적 높게 제시되었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.654-659
• /
• 2001

A new non-contact method of the frost thickness measurement has been developed. The method is based on the digital image processing technique to identify the reflection edge of the image captured by a CCD camera under laser sheet light illumination. To insure the accuracy of frost layer thickness, an in-situ calibration procedure is carried out with a calibration target with 0.5mm holes. Using the mapping function obtained by the calibration procedure, the contour of frost surface can be estimated with sub-pixel resolutions. The developed method is applied to study the effect of cooling plate temperature on the frost thickness in a small low speed wind tunnel.

• 대한기계학회논문집B
• /
• 제24권2호
• /
• pp.188-194
• /
• 2000

Thermochromic liquid crystal reflect a unique color at even temperature. Therefore, they have been successfully applied to non-intrusive heat transfer research. Hue capturing method is widely used in the quantitative measurement from the TLC image. However it is affected by several measurement conditions. The distances of camera and light source have little influence on the color, but the value of hue is seriously affected by the measurement angle. In this study, the hue capturing method is improved by considering the effect of measurement angle. This improved calibration method can diminish the misreading of temperature caused by curvature of test surface.

• International Journal of Automotive Technology
• /
• 제2권3호
• /
• pp.103-107
• /
• 2001

Many researches on pressure-swirl injectors due to the variety of application have been conducted on the effects of nozzle design, operating conditions, properties of liquid and ambient conditions on the flow and spray characteristics. The breakup length of conical emulsified fuel sheet resulting from pressure-swirl atomizer using in the oil burner was investigated with the digital image processing method with neat light oil and emulsion with water content of lotto% and the surfactant content of 1-3%. The injection pressure ranged from 0.1 to 1.2 MPa was selected. The various regimes for the stage of spray development within the experimental conditions selected in this study is newly suggested in terms of Ohnesorge number and injection pressure. The breakup length for both criteria show the same tendency even though the random nature of perforation and disintegration process of liquid sheet. The stage of spray development is widely different with the physical properties of liquid atomized, mainly viscosity of liquid. The breakup length decreases smoothly with increase in the injection pressure for the lower viscous liquid.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 추계학술대회 논문집
• /
• pp.127-133
• /
• 2001

Photoelastic isochromatic fringes related to the difference of principal stresses have some bandwidth whose light intensities are not constant and unsymmetrical in experimental image. Hence it is difficult to measure fringe order accurately at a data point by visual observation. In this study, the method of fringe sharpening, which can extract sharpened lines from both full-and half-order fringes by digital image processing, is developed. To test the method, various simple photoelastic fringe patterns are simulated and their image are processed to yield sharpened lines. The method is than applied to general problem such as image of a circular disk compressed by concentrated loads and a cylinder subjected to internal pressure. The procedure is proved to be capable of extracting sharpened lines accurately from photoelastic isochromatic fringes.

• 전자공학회논문지B
• /
• 제30B권5호
• /
• pp.34-42
• /
• 1993

Due to the low loss, broadband and accurate short time delay properties of optical fiber, it has attracted as a delay medium for high speed and broad-band signal processing. In this paper, we consider the coherent optical fiber filter of lattice structure, which uses coherent light sources and consists of directional couplers and optical fiber delay elements.The differences between the optical fiber filter and the ordinary digital filter are 1) the coupling coefficients of directional couplers are restricted between 0 and 1. 2) the optical signal is divided into ${j\sqrt{a}}and\;{j\sqrt{1-a}}$ at the directional coupler. Considering these restrictions, the design formulae and condition of realibility for optical fiber filter of lattice structure which makes the optimal use of optical signal energy are derived.