• Journal of the Optical Society of Korea
• /
• 제16권3호
• /
• pp.263-269
• /
• 2012

In this paper, we propose a new dual optical encryption method for binary data and secret key based on 2-step phase-shifting digital holography for a cryptographic system. Schematically, the proposed optical setup contains two Mach-Zehnder type interferometers. The inner interferometer is used for encrypting the secret key with the common key, while the outer interferometer is used for encrypting the binary data with the same secret key. 2-step phase-shifting digital holograms, which result in the encrypted data, are acquired by moving the PZT mirror with phase step of 0 or ${\pi}/2$ in the reference beam path of the Mach-Zehnder type interferometer. The digital hologram with the encrypted information is a Fourier transform hologram and is recorded on CCD with 256 gray level quantized intensities. Computer experiments show the results to be encryption and decryption carried out with the proposed method. The decryption of binary secret key image and data image is performed successfully.

• 대한원격탐사학회지
• /
• 제28권1호
• /
• pp.121-128
• /
• 2012

조간대 지역의 고해상 지형도는 해수 운동에 의한 퇴적 및 침식량의 변화와 같이 과학적인 연구의 기초자료로 쓰일 뿐만 아니라 연안 습지의 실제적인 관리 및 환경변화 모니터링의 도구로서도 그 활용의 가치가 높다. 그러나 조간대는 하상 퇴적물의 유입과 조석현상에 의해 빠르게 변화하고 있어 원격탐사와 같이 단기간에 넓은 지역을 조사할 수 있는 기술의 적용이 필요하다. 레이더 간섭기술은 가장 보편적이면서 성공적인 고해상 지형도 작성 기술로 알려져 있으나, 조간대에서는 지표노출시간의 제약 및 빠른 상태변화로 인해 일반적인 repeat-pass 간섭기술로는 충분한 긴밀도를 얻기 힘들다. 이 연구에서는 재방문주기가 짧은 Cosmo-SkyMed 1일 간격 관측자료와 ERS2-ENVISAT 30분 간격 관측자료를 이용하여 레이더 간섭기술을 이용한 조간대 지형도 작성을 실험하였다. 두 자료 모두 긴 수직기선으로 인한 높은 고도민감도와 짧은 관측주기로 인한 높은 긴밀도로 간섭위상을 구할 수 있었으나, Cosmo-SkyMed 관측자료에서는 대기에 의한 위상지연 효과와 조석에 의한 조간대 표층의 함수율 변화로 인하여 조간대와 같이 평평한 지역의 지형정보를 추출하는데에 어려움이 발생한다. 반면에 ERS2-ENVISAT 관측자료는 이종센서간의 관측중심주파수 차이를 상쇄하기 위해 설정된 긴 수직기선 덕분에 매우 높은 고도민감도를 가지며, 30분이라는 짧은 관측주기는 간섭쌍을 이루는 두 영상에 포함된 대기지연효과를 대부분 상쇄시키므로 조간대의 지형도 작성에 이상적인 자료로 판단된다.

• 대한원격탐사학회지
• /
• 제21권4호
• /
• pp.287-302
• /
• 2005

ERS-1/9 및 JERS-1 SAR 영상의 레이더 영상 간섭기법을 이용하여 대전지역의 수치고도모델 (DEM)을 제작하였다 도심지역에서는 GPS 측량으로부터 추출된 지상기준점(GCP)를 이용하여 생성된 DEM의 정밀도를 분석하였고, GCP가 없는 산악지 역에서는 1:25,000 수치지도로부터 추출된 DEM과의 상대적 고도차를 이용하여 정확도를 평가하였다 위성의 궤도오차 및 phase unwrapping에 의한 고도 오차를 최소화하기 위해 DEM생성에 이용되는 전통적인 InSAR기법 외에 DInSAR기법을 추가로 적용하였다. 또한 DInSAR기법 적용시 사용된 DEM의 해상도에 따른 결과의 정밀도를 분석하기 위해 GTOPO30, SRTM-3, 그리고 1:25,000 수치지도로부터 생성된 DEM을 사용하였다. 하나의 ERS tandem 간섭쌍과, 6개의 JERS-1 간섭쌍 분석 결과, 위상간섭기법 적용 시 평지 지역에서의 정밀도는 DEM 사용 여부 및 사용된 DEM의 해상도에 무관하게 약 5-6 m의 고도오차를 보인다 반면 산악지역에서는 SRTM-3 및 1:25,000 수치지도 DED을 이용한 DInSAR 기법이 phase unwrapping에 의한 오차를 줄이는데 매우 효과적이었다. 또한 6 개의 JERS-1 간섭쌍의 중첩을 통해 제작한 DEM의 경우 레이더 영상의 낮은 신호대잡음비 및 대기에 의한 오차를 줄일 수 있었다. 다수의 SAR 간섭쌍과 저해상도 DEM을 이용한 위상간섭기법은 저비용으로 빠른 시간 내에 DEM 해상도를 향상하는데 매우 효과적인 수단으로 사용될 수 있다.

• Journal of the Optical Society of Korea
• /
• 제19권1호
• /
• pp.22-28
• /
• 2015

We propose a new method for improving the phase contrast of a multiphase digital holographic microscope using a spatial light modulator (SLM). Using the SLM as the annulus, our method improves the light contrast of the object edge to achieve higher accuracy. We demonstrate a digital holographic microscopy technique that provides a 30% improvement in the phase contrast compared to conventional microscopy, which utilizes a mechanical annulus. The phase-contrast improvement allows the 3D reconstructed hologram to be determined more precisely.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.140-143
• /
• 2001

Digital shearography, a speckle pattern method is based on the superposition of two laterally sheared images. Therefore, object points which are positioned in some distance from each other are superposed in the image plane. This shearography, one of NDT methods without contact, is able to inspect defects in pipelines and pressure vessels that are used in nuclear power plants. This is can inspect whole fields and has a low sensitivity to environmental noise. Because optical setting is very simple, it has a little exhaustion of time, cost and man power. And also it can find a defect position through real time monitoring of a part. This paper, finds out the relationship among shearing quantity image quality and defect size with this method.

• Journal of the Optical Society of Korea
• /
• 제16권4호
• /
• pp.354-364
• /
• 2012

In this paper, a new 2-step quadrature phase-shifting digital holographic optical encryption method using orthogonal polarization is proposed and tolerance errors for this method are analyzed. Unlike the conventional technique using a PZT mirror, the proposed optical setup comprises two input and output polarizers, and one ${\lambda}$/4-plate retarder. This method makes it easier to get a phase shift of ${\pi}$/2 without using a mechanically driven PZT device for phase-shifting and it simplifies the 2-step phase-shifting Mach-Zehnder interferometer setup for optical encryption. The decryption performance and tolerance error analysis for the proposed method are presented. Computer experiments show that the proposed method is an alternate candidate for 2-step quadrature phase-shifting digital holographic optical encryption applications.

• Journal of the Optical Society of Korea
• /
• 제18권3호
• /
• pp.230-235
• /
• 2014

Two-step quadrature phase-shifting digital holography based on the calculated intensity of a reference wave is proposed. In the Mach-Zehnder interferometer (MZI) architecture, the method only records two quadrature-phase holograms, without reference-wave intensity or object-wave intensity measurement, to perform object recoding and reconstruction. When the reference-wave intensity is calculated from the 2D correlation coefficient (CC) method that we presented, the clear reconstruction image can be obtained by some specific algorithm. Its feasibility and validity were verified by a series of experiments with 2D objects and 3D objects. The presented method will be widely used in real-time or dynamic digital holography applications.

• Current Optics and Photonics
• /
• 제4권6호
• /
• pp.483-499
• /
• 2020

In this paper, a novel analog signature scheme is proposed by modifying an RSA-based digital signature scheme with optical phase-shifting digital holography. The purpose of the proposed method is generating an analog signature to provide data confidentiality and security during the data transfer, compared to the digital signature. The holographic encryption technique applied to a hash value reveals an analog-type of pseudo-random pattern in the analog signature scheme. The public key and secret key needed to verify the analog signature are computed from public key ciphers which are generated by the same holographic encryption. The proposed analog signature scheme contains a kind of double encryption in the process of generating signature and key, which enhances security level more than the digital signature. The results of performance simulations show the feasibility of the highly secure signature scheme, and security analysis shows high robustness against known-message attacks and chosen-message attacks. In addition, the proposed method can apply to one-time signature schemes which can be used to sign only one message and it can also apply to authentication, e-mails, electronic banking and electronic data interchange.

• Journal of the Optical Society of Korea
• /
• 제15권3호
• /
• pp.264-271
• /
• 2011

In this paper we examine and compare the computational speeds of three-dimensional (3D) object recognition by use of digital holography based on central unit processing (CPU) and graphic processing unit (GPU) computing. The holographic fringe pattern of a 3D object is obtained using an in-line interferometry setup. The Fourier matched filters are applied to the complex image reconstructed from the holographic fringe pattern using a GPU chip for real-time 3D object recognition. It is shown that the computational speed of the 3D object recognition using GPU computing is significantly faster than that of the CPU computing. To the best of our knowledge, this is the first report on comparisons of the calculation time of the 3D object recognition based on the digital holography with CPU vs GPU computing.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.226-230
• /
• 2001

Electronic Speckle Pattern Interferometry (ESPI) has been recently developed and widely used because it has advantage to be able to measure surface deformations of engineering components and materials in industrial areas with non-contact. The spekle patterns to be formed with interference phenomena of scattering phenomena measure the out-of-plane deformations, together with the use of digital image equipment to process the informations included in the speckle patterns and the display consequent interferogram on a computer monitor. In this study, the experimental results of a canti-levered plate using ESPI were compared with those obtained from the simple beam theory. The ESPI results of the canti-levered plate analyzed by 4-step phase shifting method are close to the theoretical expectation. Also, out-0of-plane displacements of a spot welded canti-levered plate were measured by ESPI with 4-step phase shifting technique. The phase map of the spot welded canti-levered plate is quite different from that of the canti-levered plate without spot welding.