• Physical Therapy Korea
• /
• v.22 no.4
• /
• pp.8-16
• /
• 2015

The purpose of this study was to evaluate the effects of mobilization of the sciatic nerve on hamstring flexibility, lower limb strength, and gait performance in patients with chronic stroke. This study was a randomized clinical trial with a crossover design. Sixteen subjects were recruited for this study. The subjects were randomly divided into two intervention groups and underwent either of the following two interventions: sciatic nerve mobilization or static stretching of the hamstring. We assessed hamstring flexibility, lower limb strength, and gait performance using a digital inclinometer, a hand-held dynamometer, and the 10-meter walk test, respectively. Subjects had a 24-hour rest period between each session in order to minimize carryover effects. Measurements for each test were assessed prior to and immediately after the intervention sessions. Using a two-way analysis of variance test with repeated measures, data from the two trials were analyzed by comparing the differences between both techniques. The level of statistical significance was set at .05. Sciatic nerve mobilization resulted in significantly better knee extensor strength (p=.023, from $15.32{\pm}5.98$ to $18.16{\pm}6.95kg$) and knee flexor strength (p=.011, from $7.80{\pm}4.80$ to $8.15{\pm}4.24kg$) in the experimental group than in the control group. However, no significant effects of static stretching of the hamstring were observed on hamstring flexibility from the ankle plantar flexion (p=.966) and ankle neutral positions (p=.210) and on gait performance (p=.396). This study indicated that the sciatic nerve mobilization technique may be more effective in muscle activation of the knee extensor muscle and knee flexor muscle than hamstring static stretching technique in patients with chronic stroke.

• Imaging Science in Dentistry
• /
• v.42 no.3
• /
• pp.155-161
• /
• 2012

Purpose: This study was performed to investigate the prevalence, morphology, and calcification pattern of the elongated styloid process in the Mathura population and its relation to gender, age, and mandibular movements. Materials and Methods: The study analyzed digital panoramic radiographs of 2,706 adults. The elongated styloid process was classified with the radiographic appearance based on the morphology and calcification pattern. The limits of mandibular protrusion were evaluated for each subject. The data were analyzed by using a Student's t-test and chi-squared test with significance set at p=0.05. Results: Bilateral elongation having an "elongated" type styloid process with a "partially mineralized" pattern was the most frequent type of styloid process. No correlation was found between styloid process type and calcification pattern on the one hand and gender on the other, although elongated styloid was more prevalent in older and male populations (p<0.05). Further styloid process elongation showed no effect on mandibular protrusive movement (p>0.05). Conclusion: Dentists should recognize the existence of morphological variation in elongated styloid process or Eagle syndrome apparent on panoramic radiographs. We found higher prevalence of elongated styloid process in the population of the Mathura region when compared with other Indian populations. The calcification of the styloid process was more common in the older age group with no correlation to gender, mandibular movement and site. "Type I" with a "partially calcified" styloid process was observed more frequently in the population studied.

• Journal of Periodontal and Implant Science
• /
• v.43 no.4
• /
• pp.160-167
• /
• 2013

Purpose: This study examined the factors that can be associated with the appearance of the interproximal papilla. Methods: One hundred and forty-seven healthy interproximal papillae between the maxillary central incisors were examined. For each subject, a digital photograph and periapical radiograph of the interdental embrasure were taken using a 1-mm grid metal piece. The following parameters were recorded: the amount of recession of the interproximal papilla, contact point-bone crest distance, contact point-cemento-enamel junction (CEJ) distance, CEJ-bone crest distance, inter-radicular distance, tooth shape, embrasure space size, interproximal contact area, gingival biotype, papilla height, and papilla tip form. Results: The amount of recession of the interproximal papilla was associated with the following: 1) increase in contact point-bone crest, contact point-CEJ, and CEJ-bone crest distance; 2) increase in the inter-radicular distance; 3) triangular tooth shape; 4) decrease in the interproximal contact area length; 5) increase in the embrasure space size; and 6) flat papilla tip form. On the other hand, the amount of gingival recession was not associated with the gingival biotype or papilla height. In the triangular tooth shape, the contact point-bone crest distance and inter-radicular distance were longer, the interproximal contact area length was shorter, and the embrasure space size was larger. The papilla tip form became flatter with increasing inter-radicular distance and CEJ-bone crest distance. Conclusions: The relative position of the interproximal papilla in healthy subjects was associated with the multiple factors and each factor was related to the others. A triangular tooth shape carries a higher risk of recession of the interproximal papilla because the proximal contact point is positioned more incisally and the bone crest is positioned more apically. This results in an increase in recession of the interproximal papilla and flat papilla tip form.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.35.1-35.1
• /
• 2016

Nearby galaxy clusters and their surrounding regions represent the current endpoint of evolution galaxy cluster evolution. We present a new catalog of 1589 galaxies, what we call Extended Virgo Cluster Catalog (EVCC), in wider area of the Virgo cluster based on the Sloan Digital Sky Survey (SDSS) Data Release 7. The EVCC covers an area 5.2 times larger than the footprint of the classical Virgo Cluster Catalog, and reaches out to 3.5 times the virial radius of the Virgo cluster. The EVCC contains fundamental information such as membership, morphology, and photometric parameters of galaxies. The EVCC defines a comprehensive galaxy sample covering a wider range in galaxy density that is significantly different from the inner region of the Virgo cluster. It will be the foundation for forthcoming galaxy evolution studies in the extended Virgo cluster region, complementing ongoing and planned Virgo cluster surveys at various wavelengths. We also present the large scale structures in the field around the Virgo cluster. We identified seven galaxy filaments and one possible sheet in three dimensions of super-galactic coordinates based on the HyperLEDA database. By examining spatial distribution and Hubble diagram of galaxies, we found that six filaments are directly associated with the main body of the Virgo cluster. On the other hand, one filament and one sheet are structures located at background of the main body of Virgo cluster. The EVCC and the filament structures will be the foundation for forthcoming studies of galaxy evolution in various environments as well as buildup of the galaxy cluster at z ~ 0, complementing ongoing and planned Virgo cluster surveys at various wavelengths.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.2
• /
• pp.394-400
• /
• 2016

Currently, with the rapid development of the digital age, multimedia-related image devices become popular. However image deterioration is generated by multiple causes during the transmission process, with typical example of salt and pepper noise. When the noise of high density is added, existing methods are deteriorated in the characteristics of removal noise. After judging the noise condition to remove the salt and pepper noise, if the center pixel is the non-noise pixel, it is replaced with the original pixel. On the other hand, if it is the noise pixel, algorithm is suggested by the study, where the histogram of the corrupted image and the median filters are used. And for objective judgment, the proposed algorithm was compared with existing methods and PSNR(peak signal to noise ratio) was used as judgment standard. As the result of the simulation, The proposed algorithm shows a high PSNR of 32.57[dB] for Lena images that had been damaged of a high density salt and pepper noise(P=60%), Compared to the existing CWMF, A-TMF and AWMF there were improvements by 21.67[dB], 18.07[dB], and 20.13[dB], respectively.

• Korean Journal of Agricultural Science
• /
• v.43 no.3
• /
• pp.432-440
• /
• 2016

The consumption of pre-treated vegetables (including fresh-cut vegetables) that are washed, peeled, and trimmed has been significantly increased because of their easy use for cooking. Vegetable cutting machines have been widely utilized for producing fresh-cut vegetables or agricultural products of different sizes; however, the design standard is not established for specific types of agricultural products. Therefore, this study was conducted to determine mechanical properties (compressive and shear forces) of targeted agricultural products (radish, carrot, squash, cucumber, shiitake mushroom, and sweet potato) for developing a multipurpose vegetable cutting machine. According to ASAE standard (s368.3), compressive and shear forces of targeted agricultural products were measured by using a custom built UTM (universal testing machine). Shape type of samples and speed ranges (5 - 15 mm/min) of loading rate on bioyield and shear points varied depending on the targeted agricultural product. The range of averaged bioyield points of targeted agricultural products were between 7.89 and 146.98 N. On the other hand, their averaged shear points ranged from 22.50 to 53.47 N. Results clearly showed that the bioyield and shear points of targeted agricultural products were thoroughly affected by their components. As measuring compressive and shear forces of a variety of agricultural products, it will be feasible to calculate blade cutting force for designing multipurpose vegetable cutting machine.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.5
• /
• pp.101-110
• /
• 2009

The unconscious and non-intrusive measurements of activity signals or physiological signals represent important enabling technologies for realizing a ubiquitous healthcare environment as well as a related UI. Particularly, non-intrusive measurements should be used in activity monitoring system for long-term monitoring. This paper is based on activity estimation by measuring the activity signals of a user using a handhold device with an accelerometer. The user activity estimation system (UAES) presented in this paper makes non-intrusive measurements of activity signals to minimize inconveniencing a user and to create a more practical implementation in real life. Thus, a variety of positions in which the handhold device can be carried by a user for daily use is considered, such as in the front/hip/shirt pockets, a backpack, on the waist, and in the hand.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.3
• /
• pp.64-73
• /
• 2008

In this paper, we propose a novel objective video quality assessment method from encoded H.264/AVC.. Conventional algorithms have been proposed to assess video/image quality with image frames reconstructed in a decoder side. On the other hand, the proposed assessment is conducted with the syntax elements which are embedded in a bitstream. The proposed BS-based algorithm makes use of the statistics of boundary strength(BS) which are employed in the H.264/AVC. The proposed algorithm has lower computational complexity than conventional methods, EPSNR and Blockiness, resulting that it can accomplish assessment of the video quality in real time. Furthermore, the accuracy of the proposed video quality assessment is about 32% and 65% better than several conventional algorithms.

• International Journal of Advanced Culture Technology
• /
• v.8 no.2
• /
• pp.116-128
• /
• 2020

In this study, we introduce a multi-modal mixed reality (MR) application for advertising the main touristic landmarks on Jeju Island, and evaluate its effectiveness based on the Technology Acceptance Model (TAM) with a focus on the user's involvement in Korean culture (K-Culture). Specifically, we deployed several stimuli to enable users to retrieve information, visualize a variety of heritage content such as text, images, videos, virtual artifacts, and immerse in a VR environment to experience the heritage locations. The results of the online survey with 436 participants showed that for consumers with low K-Culture involvement, Perceived Usefulness and Perceived Ease-of-Use did not affect their Intention to Visit the island. Still, it had a significant impact on their Intention to Use the application. On the other hand, for the group with high K-Culture involvement, Perceived Usefulness had no effect on the Intention to Use and Intention to Visit. However, Perceived Ease-of-Use had a significant impact on their Intention to Use the application and Intention to Visit Jeju Island. Therefore, when user involvement in K-Culture is high, convenience of use has played a significant role in sensory media usage and the intention to visit, regardless of the usefulness of the mixed reality content. In contrast, users with low K-Culture involvement primarily focused on the functional aspects of the application. These findings open the path for follow-up studies on K-Culture involvement and immersive media tourism marketing, which will benefit digital tourism marketing and Korea's tourism industry.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.591-595
• /
• 2010

Conventional methods of model evaluation usually rely only on model performance based on a comparison of simulated variables to corresponding observations. However, this type of model evaluation has been criticized because of its insufficient consideration of the various uncertainty sources involved in modeling processes. This study aims to propose an extended model evaluation method using multiple assesment indices (MAIs) that consider not only the model performance but also the model structure and parameter uncertainties in rainfall-runoff modeling. A simple reservoir model (SFM) and distributed kinematic wave models (KWMSS1 and KWMSS2 using topography from 250m, 500m, and 1km digital elevation models) were developed and assessed by three MAIs for model performance, model structural stability, and parameter identifiability. All the models provided acceptable performance in terms of a global response, but the simpler SFM and KWMSS1 could not accurately represent the local behaviors of hydrographs. In addition, SFM and KWMSS1 were structurally unstable; their performance was sensitive to the applied objective functions. On the other hand, the most sophisticated model, KWMSS2, performed well, satisfying both global and local behaviors. KMSS2 also showed good structural stability, reproducing hydrographs regardless of the applied objective functions; however, superior parameter identifiability was not guaranteed. Numerous parameter sets could lead to indistinguishable hydrographs. This result supports that while making a model complex increases its performance accuracy and reduces its structural uncertainty, the model is likely to suffer from parameter uncertainty. The proposed model evaluation process can provide an effective guideline for identifying a reliable hydrologic model.