• Korean Journal of Remote Sensing
• /
• v.8 no.2
• /
• pp.131-145
• /
• 1992

A low cost personal computer and image processing S/W were empolyed to derive Digtal Elevation Model(DEM) of tidal flat from multitemporal LANDSAT TM images, and to create three-dimensional(3D) perspective views of the tidel flat on Komso bay in west coasts of Korea. The method for generation of Digital Elevation Model(DEM) in tidal flat was considered by overlapping techniques of multitemporal LANDSAT TM images and interpolations. The boundary maps of tidal flat extracted from multitemporal images with different water high were digitally combined in x, y, z space with tide in formation and used as an inputcontour data to obtain an elevation model by interpolation using spline function. Elevation errors of less than $\pm$0.1m were achived using overlapping techniques and a spline interpolation approach, respectively. The derived DEM allows for the generation of a perspective grid and drape on the satellite image values to create a realistic terrain visualization model so that the tidal flat may be viewed from and desired direction. As the result of this study, we obtained elevation model of tidal flats which contribute to characterize of topography and monitoring of morphological evolution of tidal flats. Moreover, the modal generated here can be used for simulation of innudation according to tide and support other studies as a supplementary data set.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.142-142
• /
• 2021

An arbitrary representation of an urban drainage sewer system was devised using a geographic information system (GIS) tool in order to calculate the surface and subsurface flow interaction for simulating urban flood. The proposed methodology is a mean to supplement the unavailability of systematized drainage system using high-resolution digital elevation(DEM) data in under-developed countries. A modified DEM was also developed to represent the flood propagation through buildings and road system from digital surface models (DSM) and barely visible streams in digital terrain models (DTM). The manhole, sewer pipe and storm drain parameters are obtained through field validation and followed the guidelines from the Plumbing law of the Philippines. The flow discharge from surface to the devised sewer pipes through the storm drains are calculated. The resulting flood simulation using the modified DEM was validated using the observed flood inundation during a rainfall event. The proposed methodology for constructing a hypothetical drainage system allows parameter adjustments such as size, elevation, location, slope, etc. which permits the flood depth prediction for variable factors the Plumbing law. The research can therefore be employed to simulate urban flood forecasts that can be utilized from traffic advisories to early warning procedures during extreme rainfall events.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.393-395
• /
• 2003

The changes of DEMs(Digital Elevation Models) will be detected to correct the information of DEMs and/or to get the information about themselves. This study suggests the evaluation of DEM using correlation coefficient value between the target and the reference DEMs for detect the changes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.744-749
• /
• 2018

Informatization and visualization technology for real space is a key technology for construction of geospatial information. Three-dimensional (3D) modeling is a method of constructing geospatial information from data measured by various methods. The 3D laser scanner has been mainly used as a method for acquiring digital elevation data. On the other hand, the unmanned aerial vehicle (UAV), which has been attracting attention as a promising technology of the fourth industrial revolution, has been evaluated as a technology for obtaining fast geospatial information, and various studies are being carried out. However, there is a lack of evaluation on the quantitative work efficiency and data accuracy of the data construction technology for 3D geospatial modeling. In this study, various analyses were carried out on the characteristics, work processes, and accuracy of point cloud data acquired by a 3D laser scanner and an unmanned aerial vehicle. The 3D laser scanner and UAV were used to generate digital elevation data of the study area, and the characteristics were analyzed. Through evaluation of the accuracy, it was confirmed that digital elevation data from a 3D laser scanner and UAV show accuracy within a 10 cm maximum, and it is suggested that it can be used for spatial information construction. In the future, collecting 3D elevation data from a 3D laser scanner and UAV is expected to be utilized as an efficient geospatial information-construction method.

• Atmosphere
• /
• v.29 no.5
• /
• pp.537-550
• /
• 2019

To analyze the observation environment of solar radiation stations operated by the Korea Meteorological Administration (KMA), we analyzed the skyline, Sky View Factor (SVF), and solar radiation due to the surrounding topography and artificial structures using a Digital Elevation Model (DEM), 3D camera, and solar radiation model. Solar energy shielding of 25 km around the station was analyzed using 10 m resolution DEM data and the skyline elevation and SVF were analyzed by the surrounding environment using the image captured by the 3D camera. The solar radiation model was used to assess the contribution of the environment to solar radiation. Because the skyline elevation retrieved from the DEM is different from the actual environment, it is compared with the results obtained from the 3D camera. From the skyline and SVF calculations, it was observed that some stations were shielded by the surrounding environment at sunrise and sunset. The topographic effect of 3D camera is therefore more than 20 times higher than that of DEM throughout the year for monthly accumulated solar radiation. Due to relatively low solar radiation in winter, the solar radiation shielding is large in winter. Also, for the annual accumulated solar radiation, the difference of the global solar radiation calculated using the 3D camera was 176.70 MJ (solar radiation with 7 days; suppose daily accumulated solar radiation 26 MJ) on an average and a maximum of 439.90 MJ (solar radiation with 17.5 days).

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.6
• /
• pp.101-112
• /
• 2013

Shuttle Radar Topography Mission Digital Elevation Model (SRTM DEM) offers opportunities to make advances in many research areas including hydrology by providing near-global scale elevation measurements at a uniform resolution. Its wide coverage and complimentary online access especially benefits researchers requiring topographic information of hard-to-access areas. However, SRTM DEM also contains inherent errors, which are subject to propagation with its manipulation into analysis outputs. Sensitivity of hydrologic analysis to the errors has not been fully understood yet. This study investigated their impact on estimation of hydrologic derivatives such as slope, stream network, and watershed boundary using Monte Carlo simulation and spatial moving average techniques. Different amount of the errors and their spatial auto-correlation structure were considered in the study. Two sub-watersheds of Geum and Deadong River areas located in South and North Korea, respectively, were selected as the study areas. The results demonstrated that the spatial presentations of stream networks and watershed boundaries and their length and area estimations could be greatly affected by the SRTM DEM errors, in particular relatively flat areas. In the Deadong River area, artifacts of the SRTM DEM created sinks even after the filling process and then closed drainage basin and short stream lines, which are not the case in the reality. These findings provided an evidence that SRTM DEM alone may not enough to accurately figure out the hydrologic feature of a watershed, suggesting need of local knowledge and complementary data.

• Journal of the Korean Geophysical Society
• /
• v.9 no.2
• /
• pp.87-97
• /
• 2006

LIDAR(Light Detection and Ranging) is a new technology for obtaining DEM(Digital Elevation Model)ewith high density and high point acuracy. As LIDAR emerged, DEM could be developed in the earthsurface more efficiently and more economically, compared to the conventional aerial photogrametry.In this study, a digital camera is simultaneously used in combined LIDAR surveying, and acquired digitial image and DEM produce digital orthoimage. In this process, methods of combining sensor andorthoimage, GCPs determined by GPS surveying are used. Two digital orthoimage are produced; onewith a few GCP and the other without them. The produced maps can be used to corect or revised1:1,000 or 1:5,000 scale maps acordingly.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.2
• /
• pp.221-230
• /
• 1997

In hydrology analysis, the result of a slope analysis for terrain have an very important effect on water quality and water quantity Recently, a slope analysis tend to use the digital elevation model rater than the traditional map sheet. But a terrain slope analysis by the digital elevation model depends on grid size of the digital elevation model. Hence the effect of a slope analysis by the digital elevation model is a important factor. In this study, therefor, in order to determine a hydrological parameter and a terrain parameter for simulation of the water quality and the hydrological property, we adapted two sample area that are the Nerin stream of the basin of the Soyang lake and a Osip stream of Samchuk, and its individual coverages are $640\;km^2$ and $33\;km^2$. Also to analyze the effect of grid size in the slope of a basin, we apply DEM changing a grid size respectively at intervals of 100 m from 100 m to 1.000m for the Nerin stream basin and at intervals of 10 m from 20 m to 300 m for the Osip stream basin.

• Korean Journal of Remote Sensing
• /
• v.15 no.4
• /
• pp.339-348
• /
• 1999

To extract value-added products which are important in scientific area and practical life, e.g. digital elevation models, ortho-rectified images and geometric corrected images, Satellite Technology Research Center at Korea Advanced Institute of Science and Technology has developed a satellite image processing software called "Valadd-Pro". In this paper, "Valadd-Pro" software is briefly introduced and its main components such as precise geometric correction, ortho-rectification and digital elevation model extraction component are described. The performance of "Valadd-Pro" software was assessed on 10m resolution 6000 $\times$ 6000 SPOT panchromatic images (60km $\times$ 60km) using ground control points from GPS measurements. The height accuracy was measured by comparing our results with 100m resolution $DTEDs^{1)}$ produced by USGS and 60m resolution DEMs generated from digitized contours produced by National Geography Institute. Also, to show the superior performance of "Valadd-Pro" software, we compared the performance with that of commonly used PCI$\circledR$ commercial software. Based on the results, the geometric correction of "Valadd-Pro" software needs fewer ground control points than that of PCI$\circledR$ software and the ortho-rectification of "Valadd-Pro" software shows similar performance to that of PCI$\circledR$ software. In the digital elevation model extraction, "Valadd-Pro" software is two times more accurate and four times faster than PCI$\circledR$ software.ccurate and four times faster than PCI$\circledR$ software.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.61 no.6
• /
• pp.55-65
• /
• 2019

Universal Soil Loss Equation (USLE) is to estimate potential soil loss and has benefit in use with its simplicity. The equation is composed of five factors, one of the factors is the slope length and steepness factor (LS factor) that is for topographic property of fields to estimate potential soil loss. Since the USLE was developed, many equations to compute LS was suggested with field measurement. Nowadays the factor is often computed in GIS software with digital elevation model, however it was reported that the factor is very sensitive to the resolution of digital elevation model. In addition, the digital elevation model of high resolution less than 3 meter is required in small field application, however these inputs are not associate with the empirical models' backgrounds since the empirical models were derived in 22.1 meter field measurements. In the study, four equation to compute LS factor and two approaches to determine slope length and steepness were examined, and correction factor was suggested to provide reasonable precision in LS estimations. The correction factor is computed with field area and cell size of digital elevation model, thus the correction factor can be adapted in any USLE-based models using LS factor at field level.