• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.5
• /
• pp.475-481
• /
• 2019

A splint is one of assisting devices for the disabled with hemiplegia or contracture and is manually made by an experienced expert. Heated thermoplastic materials are continuously fitted to the affected part. This traditional method has a possible risk of low-temperature burn, quality variance of the splint due to the proficiency of maker. etc. While various approaches has been made using 3D printing technology in order to redeem those disadvantages, they still carry high cost issues with 3D scanners or accuracy issues with manual measurement. This research begins with symmetrical characteristics of human body and focuses on the preliminary study for the possibility of splint manufacturing with 3D printing technology based on geometric characteristics of unaffected arm. 3D right and left forearm models of healthy male adults were created by photogrammetry software and a series of digital images in order to measure the circumference and cross-sectional area of the forearm models at every 20mm from the elbow. The circumference and cross-sectional area showed tolerable levels of differences between both sides within subjects; The circumference and cross-sectional area showed very strong correlations between both sides within subjects. From these findings, the possibility of splint manufacturing with 3D printing technology could be confirmed based on the geometric characteristics of unaffected side.

• Journal of the Korean Society of Radiology
• /
• v.13 no.5
• /
• pp.765-771
• /
• 2019

Noise in skull X-ray imaging is inevitable, which reduces imaging quality and diagnostic accuracy and increases errors due to the nature of digital imaging devices. Increasing the dose can attenuate noise, but that could lead to big problems with higher exposure dose received by patients. Thus, noise reduction algorithms are actively being studied at low doses to solve dose problems and reduce noise at the same time. Wiener filter and median filter have been widely used, with the disadvantages of poor noise reduction efficiency and loss of much information about imaging boundary. The purpose of this study is to apply total variation (TV) algorithm to skull X-ray imaging that can compensate for the problems of previous noise reduction efficiency to assess quantitatively and compare them. For this study, skull X-ray imaging is obtained using various kVp and mAs using the skull phantom using the X-ray device of Siemens. In addition, contrast to noise ratio (CNR) and coefficient of variation (COV) are compared and measured when noisy image, median filter, Wiener filter and TV algorithm were applied to each phantom imaging. Experiments showed that when TV algorithms were applied, CNR and COV characteristics were excellent under all conditions. In conclusion, we've been able to see if we can use TV algorithm to improve image quality and CNR could be seen to increase due to the decrease in noise as the amount of increased mAs. On the other hand, COV decreased as the amount of increased mAs, and when kVp increased, noise was reduced and the transmittance was increased, so COV was reduced.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.23 no.4
• /
• pp.234-252
• /
• 2020

This paper is to verify the effectiveness of 'Hybrid Disaster Management Strategy' that integrates 'RTM(Real-time Monitoring) based On-line' and 'UAV based Off-line' system. For landslide prone area where sensors were installed, the conventional way of risk management so far has entirely relied on RTM data collected from the field through the instrumentation devices. But it's not enough due to the limitation of'Pin-point sensor'which tend to provide with only the localized information where sensors have stayed fixed. It lacks, therefore, the whole picture to be grasped. In this paper, utilizing 'Digital Photogrammetry Software Pix4D', the possibility of inference for the deformation of ungauged area has been reviewed. For this purpose, actual measurement data from RTM were compared with the estimated value from 3D point cloud outcome by UAV, and the consequent results has shown very accurate in terms of RMSE.

• The Journal of the Korea Contents Association
• /
• v.21 no.4
• /
• pp.77-87
• /
• 2021

Smart Factory refers to a factory that can be controlled by itself with an intelligent factory that improves productivity, quality and customer satisfaction by combining the entire process of manufacturing and production with digital automation solutions. The manufacturing industry around the world is rapidly changing, with Germany, Europe, and the United States at the center. In order to cope with such changes, the Korean government is also implementing a policy to spread the supply of smart factories for small and medium-sized companies, and related ministries and agencies such as the Ministry of Commerce, Industry and Energy, the Ministry of SMEs and Venture Business, the Korea Institute of Technology and Information Promotion, and local technoparks, as well as large companies such as Samsung, SK and LG are actively investing in smart manufacturing projects to support smart factories[1]. Factory Automation (FA) construction has many issues regarding the connection of heterogeneous equipment. The most difficult aspect of configuring various communications from various equipment is the reason. Although it may not be known if there are standards or products made up of the same company, it is not easy to build equipment that is old, up-to-date, and different use environments through a series of communications. To solve this problem, we would like to propose a method of communication using Modbus, one of FieldBus, which is one of the many industrial devices of PLC, a representative facility control system, and is used as a communication standard.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.5
• /
• pp.27-35
• /
• 2020

In 2020, one after another, musicians started to hold non-contact online concerts as the pop music industry began to shrink due to the unprecedented "Covid-19" incident, in seeking for various channels and alternatives. Taking this into account, this study conducted a survey with BTS' "Bang Bang Con The Live" as the subject that was held June 2020 to see if they were qualified as an alternative format for quarantine-focused non-contact concerts. The survey was carried out with the content analysis of online concert videos participated by music experts and by collecting evaluations and alternative suggestions from the audiences. The study showed that the sample performance video well fulfilled the actual feels of offline concert elements (field visualization, face-to-face interaction, and responsive behavior), satisfaction, and convenience as an alternative concert format as an emergency correspondence. However, it was analyzed that there was a serious lack of empathy and realism with fans. Therefore, the study showed the possibility that BTS' "Bangbangcon The Live" will function as an alternative format for non-contact concerts, but suggests that measures such as supplementing digital communication systems and technology devices must be taken to be recognized as a level of settlement in the global music community as well as in Korea.

• 지역과문화
• /
• v.8 no.2
• /
• pp.49-68
• /
• 2021

The pandemic of COVID-19 also affected performing arts business and stimulated 'Untact' performances, which means online streaming of the shows including real-time streaming. This study sought to examine factors to the consumers' acceptance. The research framework was based on the VAM, a revised model of TAM for the ICT products and services. For the research, consumer survey was conducted, where ndependent variables are perceived usefulness, pleasure, technicalty and innovation resistance, and dependent variables are percieved value and acceptance. Smart PLS was used to test the hypothesis. The result shows that the significant factors were percieved usefulness(+), pleasure(+) and innovation resistance(-). The percieved technicalty was not significant, the major reason would be that the digital devices and the internet technology are percieved a commodity these days in Korea. Percieved value was significant factor to acceptance. This study is meaningful because it is about the new phenomenon of 'untact' performance through the VAM methodology and it examined the significant factors to the attitude from the perspective of benefits and costs. There is limit that this study didn't consider old peoples' attitude. It is the reason that the continuous researches are necessary.

• Journal of Korean Elementary Science Education
• /
• v.40 no.4
• /
• pp.460-479
• /
• 2021

The crisis of the COVID-19 pandemic has caused significant changes in education systems worldwide, including in Korea. Due to COVID-19's social distancing policies, the education system was suddenly switched to distance learning, resulting in many problems in primary schools without preparation. The purpose of this study was to investigate a teacher's awareness of science education techniques, responses to issues in science classes, including inquiry activities, advantages and disadvantages, and roles after experiencing distance learning. Survey and focus interviews were conducted for primary school teachers who had previously participated in distance learning, such as online content classes and real-time interactive classes. The study findings showed three conclusions: 1) Primary school teachers conducted one-way and interactive lectures in online classes. It is vital to improve a teacher's digital literacy to improve other teaching methods such as investigation and discussion in online classes. 2) Primary school teachers acknowledged the challenges of field feedback, inquiry item preparations, and safety in inquiry activities of science classes, by providing individual experimental packages and videos and using online discussion and feedback among teacher - student and student - student interactions. 3) Primary school teachers recognized that various types of classes using IT devices and individualized learning were possible as advantages of distance learning. As for disadvantages, it was acknowledged that inquiry activities, cooperative learning, immediate feedback, and interaction among students were challenging. Furthermore, learning gaps were wider in distance learning.

• Journal of Korean Elementary Science Education
• /
• v.41 no.3
• /
• pp.480-500
• /
• 2022

In this study, the perception and demands on the use of realistic content were analyzed through in-depth interviews with elementary school teachers experienced in using realistic content in science classes. Specifically, the following questions were investigated: (1) What kind of realistic content and how do elementary school teachers use it in science classes? (2) What are the perceptions and difficulties of elementary school teachers regarding the use of realistic content in science classes? (3) What are the needs of elementary school teachers related to the professional development program for the use of realistic content in science classes? The study revealed the following results. First, elementary school teachers mainly used digital textbooks and realistic content provided by the "Science Level Up" site, and the content types could be classified into "exploration type," "visit type," and "production type," according to the purpose of use. Second, elementary school teachers mentioned the educational advantages of using realistic content to help students understand scientific content, induce interest and curiosity, and become immersed in a sense of reality. Several difficulties related to the use of realistic content were mentioned. Among them, the lack of high-quality educational content suitable for science classes and a lack of examples of specific class cases that use realistic content stood out. Thirdly, regarding the development of teacher expertise to use realistic content, elementary school teachers emphasized the need for information on quality realistic content; teacher training centered on specific class cases; instructional models that can be applied by realistic content type; and information on the purchase, use, management, and operation of necessary devices. Reflecting on these research results, implications for more effective use of realistic content in elementary science classes were discussed.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.3
• /
• pp.30-41
• /
• 2022

With the advent of autonomous driving, personal mobility, drones, and smart roads, it is necessary to respond to changes in the road traffic environment in the road guidance system. However, the use of road signs to guide the road is decreasing compared to the past due to the advent of devices such as navigation and smartphones. Therefore, in this study, a large-scale survey was conducted to derive road sign issues and usage plans to respond to future changes. Based on this, this study presented a strategy to diversify road sign functions by analyzing the factors affecting the use of road signs by citizens. As a result, first, it is necessary to provide real-time variable road guidance information that reflects user needs such as traffic, weather, and local events. Second, it is necessary to informatize digital road signs such as reflecting maps with precision. Third, it is necessary to demonstrate road guidance in a virtual environment that reflects various future mobility and road environments.

• Smart Media Journal
• /
• v.11 no.11
• /
• pp.49-62
• /
• 2022

Recently, with the development of Smart City Solutions such as Big data, AI, IoT, Autonomous driving, and Digital twins around the world, the proliferation of various smart devices and social media, and the record of the deeds that people have left everywhere, the construction of Smart Cities using the "Big Data" environment in which so much information and data is produced that it is impossible to gauge the scale is actively underway. The Purpose of this study is to construct an objective and systematic analysis Model based on Big Data to improve the transportation convenience of citizens and formulate efficient policies in Urban Information and Public Transportation accessibility in sustainable Smart Cities following the 4th Industrial Revolution. It is also to derive the methodology of developing a Big Data-Based public transport accessibility and policy management Platform using a sustainable Urban Public DB and a Private DB. To this end, Detailed Living Areas made a division and the accessibility of basic living amenities of Gwangju Metropolitan City, and the Public Transportation system based on Big Data were analyzed. As a result, it was Proposed to construct a Big Data-based Urban Information and Public Transportation accessibility Platform, such as 1) Using Big Data for public transportation network evaluation, 2) Supporting Transportation means/service decision-making based on Big Data, 3) Providing urban traffic network monitoring services, and 4) Analyzing parking demand sources and providing improvement measures.