• 동의생리병리학회지
• /
• 제27권4호
• /
• pp.481-486
• /
• 2013

To investigate the effects of facial temperature and blood flow rates generated by Miso Facial Rejuvenation Acupuncture treatment. Ten women in their twenties to fifties with no skin diseases were recruited. Miso Facial Rejuvenation Acupuncture(MFRA) was performed on the both sides of their face. We measured their facial temperature using Digital Infrared Thermal Imaging(DITI) and blood flow rates using Laser Doppler Perfusion Imaging(LDPI) at pre-treatment, immediately, twenty and sixty minutes after treatment. We analyzed data using student's t-test(p<0.05). After MFRA treatment, facial temperature on the measurement area increased immediately from $30.5{\pm}1.0^{\circ}C$ to $31.5{\pm}1.0^{\circ}C$, a statistically significant increase. Sixty minutes after treatment, facial temperature on the measurement area decreased a little bit($30.2{\pm}0.6^{\circ}C$), but there was no statistical significance. After MFRA treatment, facial blood flow rates on the measurement area increased immediately from $165.1{\pm}52.3$ PU to $342.7{\pm}51.3$ PU, a statistically significant increase. Sixty minutes after treatment, facial blood flow rates measurement area were recovered almost at the same level as before treatment. MFRA treatment could increase facial temperature and blood flow rates.

• 청정기술
• /
• 제28권1호
• /
• pp.63-78
• /
• 2022

첨단 전자산업 폐수 처리시설에서 발생되는 유기 폐수는 고농도의 유기물질 및 20가지 이상의 유독 난분해성 물질을 포함하고 있으며, 이를 효율적으로 처리하는 것은 첨단 전자산업의 당면 과제이다. 따라서, 첨단 전자산업 유기폐수 처리시설을 CPS (Cyber physical system)상 Water digital twin으로 구축하여 COD (Chemical Oxygen Demand), TN (Total Nitrogen), TP (Total Phosphorous) 및 TMAH (Tetramethylammonium hydroxide) 등 유기 오염물질의 제거 효율 평가가 가능한 전자산업 폐수 특화 모델 개발이 필요하다. 본 연구에서는 첨단전자산업 유기폐수 제거 메커니즘에 대한 분해 미생물의 성장과 사멸의 이론적인 반응속도식에 기반한 첨단 전자산업 폐수 특화 활성슬러지 모델(Electronics industrial wastewater activated sludge model, e-ASM)을 개발하였다. 개발한 e-ASM은 전자산업 폐수처리공정에서 발생하는 유기물 산화, 질산화, 및 탈질화 과정뿐만 아니라 TMAH 등 난분해성 유기물질의 분해과정 중 발생하는 질산화미생물의 저해(Inhibition) 작용 등 복잡한 생물학적 분해 메커니즘이 모사 가능하다. 이를 활용하여 실제 전자산업 유기폐수 처리시설을 Water Digital Twin으로 구현하여 CPS (Cyber physical system) 상에서 전자산업 폐수처리장에 폐수 유입 성상에 따라 공정 모델링, 유출수 예측, 공법 선정, 설계 효율 평가 등 다양한 목적으로 활용될 수 있다.

• 대한치과보철학회지
• /
• 제55권2호
• /
• pp.164-170
• /
• 2017

다른 보철 수복에 비하여 전치부의 수복을 위해서는 치료 계획 단계에서 환자 요구도를 반영해야 할 필요성이 증가된다. 임상 사진과 프리젠테이션 소프트웨어를 이용한 Digital Smile Design (이하 DSD)방식은 치료 계획을 효과적으로 시각화할 수 있어 환자 및 기공사과의 의사 소통이 용이하다. 본 증례에서는 기존 보철물에 대하여 심미적 불만을 갖고 있는 환자에서, 두 가지 방식으로 재수복을 진행하였다: (1) 심미 진단, 미소 설계와 의사소통을 위하여 DSD 방식을 이용하고, 임시 및 최종 보철물 제작에 전적으로 디지털 방식을 사용한 경우 (2) 미소 설계를 위해 진단 납형을 이용하고 보철물은 통법대로 제작한 경우. 이 증례에서 의사 소통의 측면에서는 DSD방식이 수월하였으나, (1)의 방법으로는 심미적 목적을 달성하지 못하여, 예지성 있는 결과를 위해서는 성공적 의사 소통 이외에도 다양한 심미 요소를 고려한 진보된 형태의 미소 설계 도구가 필요할 것으로 생각되었다.

• 대한치과교정학회지
• /
• 제54권3호
• /
• pp.160-170
• /
• 2024

Objective: Owing to the availability of 3D software, scanners, and printers, clinicians are encouraged to produce in-office aligners. Recently, a new direct-printing resin (Tera Harz TC-85DAC) has been introduced. Studies on its mechanical characteristics and biological effects have been published; however, evidence on its efficacy in orthodontic treatment remains scarce. This pilot study aimed to investigate the accuracy of teeth movement achieved with direct-printed aligners. Methods: Seventeen patients (eight males and nine females) with a mean age of 27.67 ± 8.95 years, presenting with dental rotations < 30° and spaces/crowding < 5 mm, were recruited for this study. The teeth movement was planned starting from a T0 digital dental cast. The 3D direct-printed aligners were produced using Tera Harz TC-85DAC resin. Once the orthodontic treatment was completed, a final digital cast was obtained (T1). The planned teeth positions were then superimposed onto the T0 and T1 digital models. The differences between the programmed movements and the achieved overall torque, tip, rotation, and transverse dimensions were assessed using the paired t test or Wilcoxon's signed rank test. Results: The overall accuracies for torque, tip, and rotation were 67.6%, 64.2%, and 72.0%, respectively. The accuracy of the change in transverse diameter was 99.6%. Conclusions: Within the limits of the present pilot study (difficulties with abnormally shaped teeth and use of attachments), it can be concluded that 3D printed aligners can be successfully printed in-house and utilized for mildly crowded cases, with a comparable accuracy of tooth movement to that of other aligners.

• 정보처리학회 논문지
• /
• 제13권7호
• /
• pp.319-325
• /
• 2024

본 연구는 공황장애 케어를 위한 모바일 어플리케이션을 개발하여 공황 발작 예방 및 증상 관리를 돕는 것을 목적으로 한다. 공황장애란 지속적인 두려움과 불안, 공황발작 등의 증상을 가지는 심리적 장애로 적절한 치료 및 관리를 필요로 하는 정신질환 중 하나이다. 이에 시공간적 제약 없이 사용할 수 있는 어플리케이션을 통해 사용자가 케어를 받을 수 있는 디지털 치료제의 필요성이 증대되고 있는 추세이다. 연구를 통해 개발된 어플리케이션은 공황장애에 대한 기본적인 정보를 제공하고 자가진단을 통해 상태를 점검할 수 있으며, 다양한 치료법을 제공하여 공황장애 케어를 효과적으로 돕는다. 또한, 사용자 실시간 위치를 기반으로 하여 공황을 일으킨 경험이 있는 장소에 도달할 시 알림을 제공함으로써 개인맞춤형 지원을 제공한다. 본 연구에서 개발된 디지털 치료제를 통해 전통적 치료법에서 벗어난 새로운 도구와 치료법을 제시하고자 한다. 더 나아가 공황장애 뿐만 아니라 정신건강 전 분야에서 디지털 치료제 활용을 도모하며, 사용자들의 삶의 질 향상에 기여할 것으로 기대된다.

• 대한디지털의료영상학회논문지
• /
• 제9권2호
• /
• pp.5-9
• /
• 2007

As developing the medical treatment image portion with the change of these times, PACS, which is able to digitalize image portion data, has a lot of data-based image data. Applying this PACS, we would like to settle down RNSXI(real-name shooting X -ray of inspector) system. We interviewed with P ACS's operators of university hospitals which is using PACS in Seoul about the present conditions whether using of RNSXI or not. And we inquired the RNSXI equipments, applying PACS database, and Interface conditions undertook to do in our hospital. All university hospitals in Seoul are set up the P ACS system. But no hospital use the RNSXI. In our hospital, we can check inspector' name or initials who exposure x-ray with the PACS Viewer by looking over equipments(CR, DR, US, MG, MR, CT) and Interface of the DICOM Header data. However, some equipments like RF and Angio can not check inspector' name or initials. Under the Film/System environment, RNSXI system has been used frequently like that inspector's signature or initial added to a patient data. Though the digital medical treatment was developed, RNSXI system was declined. It is necessary to using RNSXI system in order to improving radiologists' rights, even if it is not under the application of the medical treatment image laws. If RNSXI system use, radiologists should specialize in their major and the Repeat rate should be reduced. In environment of PACS, RNSXI system can be used by linking both the equipments and the Interface with a production enterprise of P ACS. Therefore RNSXI system applying the P ACS datebase should settle down in our medical system for being provided lots of data.

• 대한치과보철학회지
• /
• 제57권4호
• /
• pp.425-431
• /
• 2019

본 임상증례는 전치부 영역에서 안면영상, 콘빔 컴퓨터 단층촬영 그리고 구내 스캔영상을 이용하여 보철물을 시각화하는 과정을 보여준다. 이러한 접근 방식은 임상과 기공 그리고 환자 측과의 소통을 향상시킨다. 환자가 상악 중절치의 외상 후 보철치료를 위해 내원하였고, 전신 건강 상태는 양호하였다. 안면연상, 콘빔 컴퓨터 단층촬영 그리고 구내 스캔영상을 이용하여 가상 환자 모형을 제작하였다. 최종 보철물의 제작 전 보철물 디자인 영상이 환자에게 제시되었고, 환자의 의견을 반영하여 형태를 수정하였다. 이러한 디지털 작업 과정은 최적의 심미 보철물의 제작을 용이하게 하고, 보철물의 예측성을 향상시킨다.

• 한국전문물리치료학회지
• /
• 제30권2호
• /
• pp.128-135
• /
• 2023

Background: Despite the fact that aquatic exercise is one of the most popular alternative treatment methods for children with cerebral palsy (CP), there are few research regarding its effectiveness. Objects: The purpose of this study was to examine the effects of aquatic exercise on upper extremity function and postural control during reaching in children with CP. Methods: Ten participants (eight males and two females; 4-10 years; Gross Motor Function Classification System levels II-IV) with spastic diplegia were recruited to this study. The aquatic exercise program consisted of four modified movements that were selected from the Halliwick 10-point program to enhance upper extremity and trunk movements. The participants attended treatment two times a week for 6 weeks, averaging 35 minutes each session. The Box and Block Test (BBT), transferring pennies in the Bruininks-Oseretsky Test (BOT), and pediatric reaching test (PRT) scores were used as clinical measures. Three-dimensional motion analysis system was used to collect and analyze kinematic data. Differences in BBT and BOT values among pre-treatment, post-treatment, and retention (after 3 weeks) were analyzed using a Friedman test. In addition, the PRT scores and variables (movement time, hand velocity, straightness ratio, and number of movement units) from the three-dimensional motion analysis were tested using a Wilcoxon signed-rank test. The significance level was established at p < 0.05. When the results appeared to be statistically significant, a post-hoc test for multiple comparisons was performed with the Wilcoxon signed-rank test. Results: All clinical measures, which included BBT, transferring pennies of BOT, and PRT, were significantly increased between pre-intervention and post-intervention scores and between pre-intervention and retention scores after treatment (p = 0.001). Three-dimensional motion analysis mostly were significantly improved after treatment (p = 0.001). Conclusion: Aquatic exercise may help to improve body function, activity, and participation in children with varying types of physical disabilities.

• 한국정밀공학회지
• /
• 제21권10호
• /
• pp.154-161
• /
• 2004

An experimental method for measuring side-necking deformation near a crack-tip is described. It is based on Stereoscopic Digital Speckle Photography and Digital Image Correlation, and it is simple and robust to mechanical vibration inherent to a hydraulic material test system. The validity and accuracy are evaluated through a calibration fur rigid body translation. A case study has been performed for a CT specimen made of a ductile steel and the three dimensional profiles of the side-necked region are presented as the load increases. Also, the details of the procedure and the surface treatment are discussed.

• 대한치과교정학회지
• /
• 제44권6호
• /
• pp.330-341
• /
• 2014

A 19-year-old woman presented to our dental clinic with anterior crossbite and mandibular prognathism. She had a concave profile, long face, and Angle Class III molar relationship. She showed disharmony in the crowding of the maxillomandibular dentition and midline deviation. The diagnosis and treatment plan were established by a three-dimensional (3D) virtual setup and 3D surgical simulation, and a surgical wafer was produced using the stereolithography technique. No presurgical orthodontic treatment was performed. Using the surgery-first approach, Le Fort I maxillary osteotomy and mandibular bilateral intraoral vertical ramus osteotomy setback were carried out. Treatment was completed with postorthodontic treatment. Thus, symmetrical and balanced facial soft tissue and facial form as well as stabilized and well-balanced occlusion were achieved.