• Clean Technology
• /
• v.28 no.1
• /
• pp.63-78
• /
• 2022

Electronics industrial wastewater treatment facilities release organic wastewaters containing high concentrations of organic pollutants and more than 20 toxic non-biodegradable pollutants. One of the major challenges of the fourth industrial revolution era for the electronics industry is how to treat electronics industrial wastewater efficiently. Therefore, it is necessary to develop an electronics industrial wastewater modeling technique that can evaluate the removal efficiency of organic pollutants, such as chemical oxygen demand (COD), total nitrogen (TN), total phosphorous (TP), and tetramethylammonium hydroxide (TMAH), by digital twinning an electronics industrial organic wastewater treatment facility in a cyber physical system (CPS). In this study, an electronics industrial wastewater activated sludge model (e-ASM) was developed based on the theoretical reaction rates for the removal mechanisms of electronics industrial wastewater considering the growth and decay of micro-organisms. The developed e-ASM can model complex biological removal mechanisms, such as the inhibition of nitrification micro-organisms by non-biodegradable organic pollutants including TMAH, as well as the oxidation, nitrification, and denitrification processes. The proposed e-ASM can be implemented as a Water Digital Twin for real electronics industrial wastewater treatment systems and be utilized for process modeling, effluent quality prediction, process selection, and design efficiency across varying influent characteristics on a CPS.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.2
• /
• pp.164-170
• /
• 2017

When restoring their anterior dentition, patients become more demanding on esthetics compared to posterior region during treatment planning phase. Digital Smile Design (DSD) procedure is performed in presentation software and digital photographs. This can widen diagnostic visualization and aid in transferring information between clinician, patient, and technician. This case presented is that of patient with dissatisfaction of his anterior old restoration. Retreatment procedures were carried out in two different manners: (1) using DSD protocol for diagnosis, smile simulation, communication and fabricating interim and definitive prosthesis by totally digitized workflow. (2) Using diagnostic wax-up for smile design and fabricating restorations by conventional workflow. Comparing two methods, DSD was easier to communicate between the dental team than the diagnostic wax-up method. But the final result obtained failed to meet total esthetic factors. Therefore, to obtain predictable esthetic results, more advanced design tool would be needed, including consideration of various esthetic factors besides successful communications.

• The korean journal of orthodontics
• /
• v.54 no.3
• /
• pp.160-170
• /
• 2024

Objective: Owing to the availability of 3D software, scanners, and printers, clinicians are encouraged to produce in-office aligners. Recently, a new direct-printing resin (Tera Harz TC-85DAC) has been introduced. Studies on its mechanical characteristics and biological effects have been published; however, evidence on its efficacy in orthodontic treatment remains scarce. This pilot study aimed to investigate the accuracy of teeth movement achieved with direct-printed aligners. Methods: Seventeen patients (eight males and nine females) with a mean age of 27.67 ± 8.95 years, presenting with dental rotations < 30° and spaces/crowding < 5 mm, were recruited for this study. The teeth movement was planned starting from a T0 digital dental cast. The 3D direct-printed aligners were produced using Tera Harz TC-85DAC resin. Once the orthodontic treatment was completed, a final digital cast was obtained (T1). The planned teeth positions were then superimposed onto the T0 and T1 digital models. The differences between the programmed movements and the achieved overall torque, tip, rotation, and transverse dimensions were assessed using the paired t test or Wilcoxon's signed rank test. Results: The overall accuracies for torque, tip, and rotation were 67.6%, 64.2%, and 72.0%, respectively. The accuracy of the change in transverse diameter was 99.6%. Conclusions: Within the limits of the present pilot study (difficulties with abnormally shaped teeth and use of attachments), it can be concluded that 3D printed aligners can be successfully printed in-house and utilized for mildly crowded cases, with a comparable accuracy of tooth movement to that of other aligners.

• Korean Journal of Digital Imaging in Medicine
• /
• v.9 no.2
• /
• pp.5-9
• /
• 2007

As developing the medical treatment image portion with the change of these times, PACS, which is able to digitalize image portion data, has a lot of data-based image data. Applying this PACS, we would like to settle down RNSXI(real-name shooting X -ray of inspector) system. We interviewed with P ACS's operators of university hospitals which is using PACS in Seoul about the present conditions whether using of RNSXI or not. And we inquired the RNSXI equipments, applying PACS database, and Interface conditions undertook to do in our hospital. All university hospitals in Seoul are set up the P ACS system. But no hospital use the RNSXI. In our hospital, we can check inspector' name or initials who exposure x-ray with the PACS Viewer by looking over equipments(CR, DR, US, MG, MR, CT) and Interface of the DICOM Header data. However, some equipments like RF and Angio can not check inspector' name or initials. Under the Film/System environment, RNSXI system has been used frequently like that inspector's signature or initial added to a patient data. Though the digital medical treatment was developed, RNSXI system was declined. It is necessary to using RNSXI system in order to improving radiologists' rights, even if it is not under the application of the medical treatment image laws. If RNSXI system use, radiologists should specialize in their major and the Repeat rate should be reduced. In environment of PACS, RNSXI system can be used by linking both the equipments and the Interface with a production enterprise of P ACS. Therefore RNSXI system applying the P ACS datebase should settle down in our medical system for being provided lots of data.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.4
• /
• pp.425-431
• /
• 2019

This clinical case report describes the digital workflow that combines a face scan, cone beam computed tomography and an intraoral scan to visualize the outcome of prosthodontic treatment in the anterior region. This approach improves communication between clinic, laboratory and patients. A patient with healthy general condition came for a restorative treatment to treat post-traumatic central incisors of maxilla. A virtual patient replica was made by incorporating a face scan, cone beam computed tomography and an intraoral scan. Design mockup of definitive restorations was shown to the patient and modified according to the patient's desire. This digital workflow facilitates the fabrication of optimal esthetic restorations, and enhances the predictability of outcome of restorations.

• Physical Therapy Korea
• /
• v.30 no.2
• /
• pp.128-135
• /
• 2023

Background: Despite the fact that aquatic exercise is one of the most popular alternative treatment methods for children with cerebral palsy (CP), there are few research regarding its effectiveness. Objects: The purpose of this study was to examine the effects of aquatic exercise on upper extremity function and postural control during reaching in children with CP. Methods: Ten participants (eight males and two females; 4-10 years; Gross Motor Function Classification System levels II-IV) with spastic diplegia were recruited to this study. The aquatic exercise program consisted of four modified movements that were selected from the Halliwick 10-point program to enhance upper extremity and trunk movements. The participants attended treatment two times a week for 6 weeks, averaging 35 minutes each session. The Box and Block Test (BBT), transferring pennies in the Bruininks-Oseretsky Test (BOT), and pediatric reaching test (PRT) scores were used as clinical measures. Three-dimensional motion analysis system was used to collect and analyze kinematic data. Differences in BBT and BOT values among pre-treatment, post-treatment, and retention (after 3 weeks) were analyzed using a Friedman test. In addition, the PRT scores and variables (movement time, hand velocity, straightness ratio, and number of movement units) from the three-dimensional motion analysis were tested using a Wilcoxon signed-rank test. The significance level was established at p < 0.05. When the results appeared to be statistically significant, a post-hoc test for multiple comparisons was performed with the Wilcoxon signed-rank test. Results: All clinical measures, which included BBT, transferring pennies of BOT, and PRT, were significantly increased between pre-intervention and post-intervention scores and between pre-intervention and retention scores after treatment (p = 0.001). Three-dimensional motion analysis mostly were significantly improved after treatment (p = 0.001). Conclusion: Aquatic exercise may help to improve body function, activity, and participation in children with varying types of physical disabilities.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.10
• /
• pp.154-161
• /
• 2004

An experimental method for measuring side-necking deformation near a crack-tip is described. It is based on Stereoscopic Digital Speckle Photography and Digital Image Correlation, and it is simple and robust to mechanical vibration inherent to a hydraulic material test system. The validity and accuracy are evaluated through a calibration fur rigid body translation. A case study has been performed for a CT specimen made of a ductile steel and the three dimensional profiles of the side-necked region are presented as the load increases. Also, the details of the procedure and the surface treatment are discussed.

• The korean journal of orthodontics
• /
• v.44 no.6
• /
• pp.330-341
• /
• 2014

A 19-year-old woman presented to our dental clinic with anterior crossbite and mandibular prognathism. She had a concave profile, long face, and Angle Class III molar relationship. She showed disharmony in the crowding of the maxillomandibular dentition and midline deviation. The diagnosis and treatment plan were established by a three-dimensional (3D) virtual setup and 3D surgical simulation, and a surgical wafer was produced using the stereolithography technique. No presurgical orthodontic treatment was performed. Using the surgery-first approach, Le Fort I maxillary osteotomy and mandibular bilateral intraoral vertical ramus osteotomy setback were carried out. Treatment was completed with postorthodontic treatment. Thus, symmetrical and balanced facial soft tissue and facial form as well as stabilized and well-balanced occlusion were achieved.

• Journal of Yeungnam Medical Science
• /
• v.34 no.2
• /
• pp.200-207
• /
• 2017

Background: We conducted a systematic review of the literature to investigate the correlation between the interval to treatment and management of tendon avulsion ruptures in the musculotendinous junction (MTJ) of the forearm. Methods: A thorough literatures search for studies of tendon avulsion injuries at the forearm was conducted using PubMed, MEDLINE, CINAHL, and Cochrane databases in accordance with the PRISMA guidelines. In total, five case series and 15 case reports accounting for 87 injured tendons involving 60 patients were selected for the analysis. Results: Twenty-six patients had 44 tendon injuries associated with avulsion amputations, 31 patients had 38 tendon ruptures associated with closed avulsion injuries and three patients had five tendon ruptures associated with open avulsion injuries. Eighteen of the 49 (37%) patients were immediately treated for tendon ruptures and one of the 32 (3%) tendon ruptures treated via elective surgery was directly repaired. Additionally, 18 of the 30 (60%) tendons were directly repaired and 12 of the 30 (40%) tendons were transferred or side-to-side repaired in the immediately treated series. In contrast, one of the 28 (4%) tendon ruptures were directly repaired and 27 of the 28 (96%) tendons were transferred or side-to-side repaired in the electively treated series. Conclusion: In managing digital tendon avulsions at the MTJ, an immediate treatment could provide an opportunity to repair the ruptured tendon directly to the muscle.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.9 no.1
• /
• pp.77-87
• /
• 2014

Objectives: The Purpose of this study is to report the effects of Korean medical treatment on patient of peroneal neuropathy caused by sitting cross-legged. Methods: The patient diagnosed as peroneal neuropathy was treated by Acupuncture, Bee Venom therapy, Herbal medicine. To evaluate the effects of Korean treatment, we used Range of Motion(ROM) of Ankle, Visual Analog Scale(VAS), Numeric Rating Scale(NRS), Ankle-Hind-foot Scale(AHS), Digital Infrared Thermal Imaging(DITI). Results: After treatment, ROM of Ankle, VAS, NRS, AHS were improved. Temperature Difference(${\Delta}T$) was decreased on DITI. Conclusions: This study suggests that Korean medical treatment might be effective on sitting cross-legged patient diagnosed as Peroneal Neuropathy.