• Title/Summary/Keyword: Digital Theory

Search Result 1,370, Processing Time 0.038 seconds

Design of the Robust Active Power Filter under the Unbalanced and Distorted Source Voltages in Three-phase Four-wire Systems (전원전압의 불평형 및 왜곡에 강인한 3상 4선식 전력용 능동 필터의 설계)

  • Min Joon-Ki;Kim HyoSung;Choi Jaeho;Kim Kyung-Hwan
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.9 no.5
    • /
    • pp.420-429
    • /
    • 2004
  • This paper proposes a novel current control strategy on active power filters using PQR instantaneous power theory which can compensate the line current harmonics and the neutral line current under the unbalanced and/or distorted source conditions in three-phase four-wire systems. The characteristics of the inverter ac filters are analyzed and a novel digital controller are proposed to overcome the inherent time delay problem in digital controllers with designed control gain in this paper. The proposed current control method is based on a sinusoidal PWM for fully-digital implementation compared with a conventional hysteresis PWM. PSiM simulation results verify the good performance of the proposed current control strategy on shunt type APFs.

Sementic Analysis of PDA (Paralinguistic Digital Affordances) in Social Media :Focusing on College Student (소셜미디어의 디지털 준언어 행동유도(PDA : Paralinguistic Digital Affordances) 의미 해석: 대학생을 중심으로)

  • Cha, Young Ran
    • The Journal of the Korea Contents Association
    • /
    • v.17 no.5
    • /
    • pp.410-422
    • /
    • 2017
  • This study researches PDA (Paralingustic Digital Affordances) in the social media on the basis of Uses and Gratification theory. The study defines PDA as Likes in Facebook and Instagram and Favorites in Twitter. The study inquiries into the motivation of using PDA and interpretational way when Social media users play a role of a sender or a receiver. For this research purpose, the focus group and interview were conducted with 36 college student in the Korea metropolitan area. The research is to comprehend the motivation and satisfaction of using PDA by applying structured theory frame of Uses and Gratification. As a result, it contributes to more satisfactions when PDA users interact each other as a sender and a receiver than mere verbal-communication. Furthermore, PDA in each social media has different meaning and gravity. For instance, Likes in Instagram is considered less important and lighter than Likes in Facebook. Moreover, people use the PDA without any restriction. People favorably use PDA most of the time, but sometimes they use in contradictory or sarcastic way.

Research on the Methodology of Documentation Storytelling (기록화 스토리텔링 방법론 연구)

  • Bae, Eun-Kyung
    • The Korean Journal of Archival Studies
    • /
    • no.70
    • /
    • pp.245-276
    • /
    • 2021
  • This paper is a study on the concept and methodology of documentation storytelling. After 'use of records' has emerged as a hot topic in the archivologic field, various methodologies are being sought for utilization. Storytelling is one of them. This study defines storytelling as a methodology for the utilization of records as 'documentation storytelling' and conceptualizes it as 'the totality of various discourses generated in the process of realizing the value of records as records'. This study introduces various theories such as archiving, storytelling, semiotics, and linguistics to establish the foundation of the theory of documentation storytelling. Archivology in the digital era ,conceived by the analog era, has the task of systematizing the academic trends of the two eras. One of the tasks is about documentation in the digital age. Documentation storytelling is also a theory required in the digital age. This study defines 'documentation' in the digital age as a variable and practical act, and defines the result of documentation as 'documentation storytelling', that is, 'a semiosis in which the value of records is constantly created'.

A Study on the Character of Media space in Responses viewd through the Digital poetics (디지털 시학 관점으로 본 뉴미디어 시대 매체공간의 특성 연구)

  • Chung, Jae-Won
    • Korean Institute of Interior Design Journal
    • /
    • v.21 no.5
    • /
    • pp.217-226
    • /
    • 2012
  • The purpose of this study had started from trying to look for a new standard in new media era and sounding out possibility of perspective of digital poetry, and had been extracting interpretational elements based on characteristics of otology in digital poetics research in technical method. Through examination of many documentary records, we suggested interpretive elements of medial space based on meaning and the theory of digital poetics. We deduced three perspectives based on relationship between the basic thesis in poetics and interpretive elements of medial space. We used them as tool for analysis of example. We chose as an example that change of program in space is clear through connection of media and space in where new form of creation happens through digital instruments and chose article as subject to which digital technology is applied and had been since 2000, The result of this study is as following: First, epistemological analysis about a space of digital media in new media era requires poetical approach unlike aesthetic approach. We can endow creative action and creation process with significance and pay attention to technical method of manufacturing, stating appropriateness of perspective in digital poetics. Second, the justice of digital poetics and its basic thesis help derive analytic elements from medial space and study purpose of production, technical method, ontological characteristics, which are three perspectives of digital poetics. Third, it analyzed characteristics of example according to three perspectives above and we can analyze characteristics of spacial expression in space of digital media into potential, trans-active, and semiosis space. It would be possible through analyzing examples in digital poetic perspective to overlook new methods of design in 21th and various perspectives and possibilities of medial space design.

  • PDF

Research on Digital Complex-Correlator of Synthetic Aperture Radiometer: theory and simulation result

  • Jingye, Yan;Ji, Wu;Yunhua, Zhang;Jiang, Changhong;Tao, Wang;Jianhua, Ren;Jingshan, Jiang
    • Proceedings of the KSRS Conference
    • /
    • 2002.10a
    • /
    • pp.587-592
    • /
    • 2002
  • A new digital correlator fur an airborne synthetic aperture radiometer was designed in order to replace the conventional analog correlator unit which will become very complicated while the number of channels is increasing. The digital correlator uses digital IQ demodulator instead of the intermediate frequency (IF) phase shifter to make the correlation processing performed digitally at base band instead of analogly at IF. This technique has been applied to the digital receiver in softradio. The down-converted IF signals from each pair of receiver channels become low rate base-band digital signals after under-sampled, Digitally Down-Converted (DDC), decimated and filtered by FIR filters. The digital signals are further processed by two digital multipliers (complex correlation), the products are integrated by the integrators and finally the outputs from the integrators compose of the real part and the imaginary part of a sample of the visibility function. This design is tested by comparing the results from digital correlators and that from analog correlators. They are agreed with each other very well. Due to the fact that the digital correlators are realized with the help of Analog-Digital Converter (ADC) chips and the FPGA technology, the realized volume, mass, power consumption and complexity turned out to be greatly reduced compared with that of the analog correlators. Simulations show that the resolution of ADC has an influence on the synthesized antenna patterns, but this can be neglected if more than 2bit is used.

  • PDF

Essential Competencies for Digital Workforce of Provincial Office in Thailand Using Delphi Technique

  • Rujira Rikharom;Wirapong, Chansanam
    • Journal of Information Science Theory and Practice
    • /
    • v.11 no.4
    • /
    • pp.51-81
    • /
    • 2023
  • This study aimed to study its required performance requirements and proposes a competency framework necessary for the digital workforce of the Provincial Offices in Thailand. The specific primary informants were determined as 17 people. The collecting process was performed using the Delphi technique and the electronic Delphi technique in two phases, totaling four rounds. In the first time, a structured interview was used to conduct online interviews for 15 people. Content validation was performed to determine issues of the competency framework essential for the digital workforce with 7-level scaled questionnaires, and then online reviews were collected between 10-15 people (2nd to 4th times). A consensus was found and confirmed four times with descriptive statistics, namely frequency, mean, standard deviation, mode, median, and the absolute value of the difference between mode and median, interquartile range, and application of the conceptual framework. The research findings revealed that the essential competency requirements for the digital workforce were covered in digital literacy (six aspects), digital skills (four aspects), and digital characteristics (four aspects). Consensus was confirmed for 84 issues. Therefore, it was concluded that 61 points for building an essential competency framework for the digital workforce made them effective in using digital technology as a labor-saving instrument, as well as for expanding the breadth of development of digital expertise to include members of the organization's digital practitioner network. This development will benefit government agencies and the private sector, both national and international, in the future.

Adaptive Control of Industrial Robot Using Neural Network (신경회로망을 이용한 산업용 로봇의 적응제어)

  • 장준화;윤정민;차보남;안병규;한성현
    • Proceedings of the Korean Society of Machine Tool Engineers Conference
    • /
    • 2002.04a
    • /
    • pp.387-392
    • /
    • 2002
  • This paper presents a new scheme of neural network controller to improve the robustuous of robot manipulator using digital signal processors. Digital signal processors, DSPs, are micro-processors that are particularly developed for fast numerical computations involving sums and products of variables. Digital version of most advanced control algorithms can be defined as sums and products of measured variables, thus it can be programmed and executed through DSPs. In addition, DSPs are as fast in computation as most 32-bit micro-processors and yet at a fraction of their prices. These features make DSPs a viable computational tool in digital implementation of sophisticated controllers. During past decade it was proposed the well-established theorys for the adaptive control of linear systems, but there exists relatively little general theory for the adaptive control of nonlinear systems. Perforating of the proposed controller is illustrated. This paper describes a new approach to the design of adaptive controller and implementation of real-time control for assembling robotic manipulator using digital signal processor. Digital signal processors used in implementing real time adaptive control algorithm are TMS320C50 series made in TI'Co..

  • PDF

Adaptive Control of Industrial Robot Using Neural Network (신경회로망을 이용한 산업용 로봇의 적응제어)

  • 차보남;장준화;한덕기;이명재;한성현
    • Proceedings of the Korean Society of Machine Tool Engineers Conference
    • /
    • 2001.10a
    • /
    • pp.134-139
    • /
    • 2001
  • This paper presents a new scheme of neural network controller to improve the robustuous of robot manipulator using digital signal processors. Digital signal processors, DSPs, are micro-processors that are particularly developed for fast numerical computations involving sums and products of variables. Digital version of most advanced control algorithms can be defined as sums and products of measured variables, thus it can be programmed and executed through DSPs. In addition, DSPs are as fast in computation as most 32-bit micro-processors and yet at a fraction of their prices. These features make DSPs a viable computational tool in digital implementation of sophisticated controllers. During past decade it was proposed the well-established theorys for the adaptive control of linear systems, but there exists relatively little general theory for the adaptive control of nonlinear systems. Perforating of the proposed controller is illustrated. This paper describes a new approach to the design of adaptive controller and implementation of real-time control for assembling robotic manipulator using digital signal processor. Digital signal processors used in implementing real time adaptive control algorithm are TMS320C50 series made in TI'Co..

  • PDF

A study on the Practical Adaptation of BIM Programs for Architectural Education (건축교육에서 BIM 프로그램 적용에 관한 연구)

  • Shin, Dong-Chul
    • Journal of The Korean Digital Architecture Interior Association
    • /
    • v.11 no.4
    • /
    • pp.57-66
    • /
    • 2011
  • The advent of BIM(Building Information Modeling) design process based on the digital media has brought innovation to the production and management of AEC industry. Accordingly the need for educating BIM professionals has been radically increased both in the real world practice and in academia. Some developed countries have already been studying and establishing the optimized curriculum in the academic architecture courses for BIM based education with multi_efforts using the digital media as design processing tools focused on educating architectural professionals with creativity and productivity. However in the domestic education systems, it is hardly found that researches and curriculums deal with the BIM education in the academia. Thus the objective of this paper is to investigate the architectural design pedagogy in the advanced digital media setting in response to the urgent need for BIM education. This study focuses on developing the curriculum based on practical adaptation of BIM programs for architectural education. It aims to provide students with the basic understanding of BIM theory and the practice of BIM tools as an instrument enhancing the creativity for architectural design. Thus this study proposes an BIM curriculum for the students who first encounter the notion and knowledge of BIM during their academic years. And the education result after the application of this curriculum has been analysed through the students questionnaires before and after the lecture.

Empirical Studies on the Conceptual Combination of Digital Convergence Products (컨버전스 제품의 인식 및 평가에 대한 실증적 연구 : 결합 개념 이론을 중심으로)

  • Kim, Jin-Woo;Yoon, Ji-Eun;Lee, In-Seong;Lee, Ki-Ho;Choi, Bo-Reum
    • Korean Management Science Review
    • /
    • v.25 no.3
    • /
    • pp.101-122
    • /
    • 2008
  • A wide variety of convergent digital products are emerging through the combination of multiple independent digital technologies. Digital convergence provides new revenue sources for businesses and new ways of satisfying individual needs of consumers. Despite its business and consumer implications, little research has addressed how people perceive or evaluate convergent products. This study aims at understanding how consumers interpret and evaluate convergent digital products by conducting two consecutive studies. Firstly, a survey was conducted to understand how people interpret convergent products in three ways suggested by the conceptual combination theory based in cognitive science. Secondly, an experiment was conducted to investigate the impact of combination strategies and product similarities on user evaluation of convergent products. Study results indicate that similarity of constituent products has a substantial effect on the interpretation of concept combination strategies. Moreover, combination strategy and product similarity were found to have substantial effects on user comprehension, perceived newness, and preferences for convergent products. This paper ends with an examination of the implications and limitations of the study results.