• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.475-480
• /
• 2000

A new positioning mechanism with Parallel type actuator using piezoelectric material and with dual type actuators using voice coil motor (VCM) and piezoactuator is proposed for optical disk drive or near-field recording type drive, and high speed position and vibration control are investigated. Parallel type bimorph piezoactuator is used as a fine motion actuator with self-sensing technique, which allows a piezoelectric material to concurrently sense and actuate in a closed loop frame work, and positive position feedback control algorithm is adopted to further control residual vibration. For positioning control of VCM, PID control algorithm is adopted.

• Journal of Mechanical Science and Technology
• /
• v.18 no.3
• /
• pp.370-378
• /
• 2004

An autonomous pipeline inspection gauge system has been developed for determining position, orientation, curvature, and deformations such as dents and wrinkles of operating pipelines by Korea Gas Company and Seoul National University. The most important part of several subsystems is the Strapdown Inertial Measurement Unit (SIMU), which is integrated with velocity and distance sensors, weld detection system, and digital recording device. The Geometry Pipeline Inspection Gauge (GeoPIG) is designed to operate continuously and autonomously for a week or longer in operating gas pipelines. In this paper, the design concepts, system integration, and data processing/analysis method for the PIG will be presented. Results from the recent experiment for a 58 kilometer gas pipeline will be discussed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.378-380
• /
• 2002

There has been lower the tilt margin by the increase of coma aberration due to the reduction of wave-length and the increase of numerical aperture for high density recording. The RF signal degradation is increased as the decrease of tilt margin. To compensate the tilt margin, the optical pick-up actuator for high-speed CD/DVD re-writable system should be able to drive the radial-tilt motion. We announce that the 3-axis drive actuator for high-speed CD/DVD rewritable system. And what was more, the DC/AC sensitivities of this actuator are suitable fur the low-speed playability, the high-speed readability and the high-speed rewritability.

• Journal of Welding and Joining
• /
• v.17 no.1
• /
• pp.71-76
• /
• 1999

The real-time holographic interferometer with digital high-speed camera is applied to the experimental study of laser induced plasma/plume in pulsed Nd:YAG laser welding. A pulsed Nd:YAG laser with 1.2 kW average power is applied to generate laser induced plume. The recording speed of the high-speed camera is 3,000 f/s. The high speed photographs of weld plume without another visualization method, are compared with the visualization photographs with holographic interferometer. The radiation intensity from the laser induced plume is recorded by the high speed photographs, which fluctuated during laser radiation and disappeared after laser end. The density distribution of the plume is recorded by the holographic visualization method. The experimental results show the process of generation of the laser induced plasma/plume, and give the feasibility of quantitative measurement of laser induced plume in laser welding.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.19 no.2
• /
• pp.101-106
• /
• 2008

The speech signal has been put into a form suitable for storage and analysis by computer, several different operation can be performed. Filtering, sampling and quantization are the basic operation in digiting a speech signal. The waveform can be displayed, measured and even edited, and spectra can be computed using methods such as the Fast Fourier Transform (FFT), Linear predictive Coding (LPC), Cepstrum and filtering. The digitized signal also can be used to generate spectrograms. The spectrograph provide major advantages to the study of speech. So, author introduces the basic techniques for the acoustic recording, digital signal processing and the principles of spectrum and spectrogram.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.12-13
• /
• 2005

Near field recording (NFR) technology with SIL has been thought as the most promising generation optical storage device. A gap distance between the SIL and the disc should be controlled to be 20${\~}$40nm. We observed gap error signal in our NFR test-bed using a blue LD (405nm). The digital gap servo filter and control algorithm were developed to maintain a constant air gap by adopting a conventional actuator.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.888-891
• /
• 1988

Recently, with the expansion of electronic equipment and computer facilities, good quality of services is required. This paper describes how to improve distribution system voltage by the Tap position seletion of P. Tr, by the decision of the optimal sending voltage in substation and we also developed three phase load flow program in distribution system. Besides we have developed the digital recording voltmeter that will be utilized with personal computer system. This meter will be useful, economical and powerful.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05b
• /
• pp.96-102
• /
• 2003

Today, stage technology is developing highly by application of digital computer. Performance is composed of audio/video and acoustic technology takes very important position in field of stage technology. Generally speaking, four factors of sound are loudness, pitch, sound timbre and duration. Loudness depends on sound pressure level, yet partly related with spectrum and dulation. Pitch depends mainly on frequence and have a relation with sound pressure and duration. sound timbre depends strongly on spectrum and have a relation with frequence. In this paper, I designed a multi-microphone system which can used in broadcasting and performance stage with vicboss 200MHz-VHF wireless microphone and vicboss 900MHz-VHF wireless microphone. I also studied about multi-microphone which can use conveniently in the super play that needs many microphones. If this multi-microphone is prodused, we could expect better sound quality and a big progress in stereo recording technology.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1994.03a
• /
• pp.12-13
• /
• 1994

Magnetic recording is still considered to be a.leader in storage industries in general. The rigid disk drive, in particular, has an advantage over tape, optical, magneto-optical, or flash memories, because of high areal density and fast access time with reasonably low cost per Mbyte. However, to be competitive in the market and to keep an edge over other storage devices, head and media in rigid disk drives require better performance per cost and more aggressive improvement in areal density, as shown in Fig. 1, than before. In this review paper, the future trend in head/media technologies of the rigid disk drive has been reviewed. Thin film media and thin film inductive/MR heads will be mainly discussed, since they are expected to be dominant in the future high-end drives over other technologies, such as particulate media or MIG heads.(omitted)mitted)

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.5
• /
• pp.327-329
• /
• 2005

Conventional CDDA(Compact Disc Digital Audio) system has limitation which means that bandwidth and resolution of the sign릴 are determined by the sampling frequency and quantization bit, 44.1kHz and 16 bit respectively. Though, new medium such as DVD-audio is developed for high-resolution audio recording, it has high complexity and difficulty in manufacturing process. So, CDDA is a widely used medium for high fidelity audio yet. In this paper, we design a new encoding system for high-resolution audio signal which has backward compatible with conventional CDDA. By evaluating for the encoding and decoding process. we verify the availability of our proposed system.