• Journal of Information Processing Systems
• /
• v.1 no.1 s.1
• /
• pp.36-40
• /
• 2005

TRISO (Tri-Isotropic)-coated fuel particle is widely applied due to its higher stability at high temperature and its efficient retention capability for fission products in the HTGR (high temperature gas-cooled reactor), one of the highly efficient Generation IV reactors. The typical ball-type TRISO-coated fuel particle with a diameter of about 1 mm is composed of a nuclear fuel particle as a kernel and of outer coating layers. The coating layers consist of a buffer PyC, inner PyC, SiC, and outer PyC layer. In this study, a digital image processing algorithm is proposed to automatically measure the thickness of the coating layers. An FBP (filtered backprojection) algorithm was applied to reconstruct the CT image using virtual X-ray radiographic images for a simulated TRISO-coated fuel particle. The automatic measurement algorithm was developed to measure the coating thickness for the reconstructed image with noises. The boundary lines were automatically detected, then the coating thickness was circularly by the algorithm. The simulation result showed that the measurement error rate was less than 1.4%.

• Proceedings of the Korea Contents Association Conference
• /
• 2004.05a
• /
• pp.151-160
• /
• 2004

This research addresses the experimental application of the digital close-range photogrammetric technique for 3D deformation measurement and visualization of road slope. The 3D displacements were extracted by the photo-triangulation based on the bundle adjustment method using the digital imagery. In addition, we produced the digital elevation models, the digital orthorectified images and the 3D perspective view images of the slope employing a digital photogrammetric workstation. Also the inclination map of the slope was generated as the data for monitoring and managing dangerous slopes.

• Journal of KIBIM
• /
• v.12 no.1
• /
• pp.10-22
• /
• 2022

Prefabricated bridges require strict management of tolerance during fabrication and assembly. In this paper, digital engineering models for prefabricated bridge components such as deck, girder, pier, abutment are suggested to support information delivery through the life-cycle of the bridge. Rule-based modeling is used to define geometry of the members considering variable dimensions due to fabrication and assembly error. DfMA(design for manufacturing and assembly) provides the rules for ease of fabrication and assembly. The digital engineering model consists of geometry, constraints and corresponding parameters for each phase. Alignment and control points are defined to manage tolerances of the prefabricated bridge during fabrication and assembly. Quality control by digital measurement of dimensions was also considered in the model definition. A pilot bridge was defined virtually to validate the suggested digital engineering models. The digital engineering models for DfMA showed excellent potential to realize prefabricated bridges.

• Journal of Information Technology Services
• /
• v.21 no.5
• /
• pp.1-13
• /
• 2022

With the rapid development of computer technology and communication networks in modern society, human economic activities in the almost every field of our society depend on various electronic devices. The huge amount of digital data generated in these circumstances is refined by technologies such as artificial intelligence and big data, and its value has become larger and larger. However, until now, it is the reality that the digital data has not been clearly defined as an economic asset, and the institutional criteria for expressing its value are unclear. Therefore, this study organizes the definition and characteristics of digital data, and examines the matters to be considered when considering digital data in terms of accounting assets. In addition, a method that can objectively measure the value of digital data was presented as a quantitative calculation model considering the time value of profits and costs.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.19 no.3
• /
• pp.61-75
• /
• 2023

In this paper, we design and experiment a 5G-based metaverse motion synchronization system with configuration of a mobile motion capture studio that has not been commercialized at home and abroad. As a result of the experiment, the average value of the latency test measurement using Wi-Fi is 0.134 seconds faster than the average latency test measurement value using the 5G network. Existing motion capture studios have spatial limitations as the motion capture range is limited to the Wi-Fi communication range. However, the 5G-based metaverse motion synchronization system configures a mobile motion capture studio so that motion performers can solve the spatial limitations by expanding the motion capture communication range indefinitely regardless of time and place. Therefore, it is possible to implement realistic metaverse contents by displaying a realistic and natural digital human because it is free from spatial constraints. The system which was tested in this paper can create a new business model by converging next-generation technologies that are receiving attention related to the digital virtual world, such as motion capture + 5G + digital human twin + metaverse. And it allows for research and develop a next-generation metaverse-based broadcasting solution at a recent time when the business value of digital human and metaverse technologies and functions has been proven and related sales are growing in earnest.

• Journal of Industrial Technology
• /
• v.17
• /
• pp.31-36
• /
• 1997

In this paper, a digital oscilloscope is implemented using a C54x DSK with PC. This digital oscilloscope has some basic measurement functions with a capability to change Volt/Div and Time/Div as well as to set appropriate trigger level automatically. Also several stored waveforms and current input waveform can be displayed simultaneously. Experimetal results show that our approaches are versatile and cost-effective particularly in educational installment.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1998.10a
• /
• pp.28-33
• /
• 1998

GPS is a effective surveying instrument using satellite measurement system and can be applicable to digital map construction of irrigation canal networks. In this study, selected a main canal of a irrigation district and GPS surveyed. The obtained survey data was corrected with post-processed DGPS and imported to GIS for the digital map construction.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.42
• /
• pp.9-16
• /
• 2000

GPS(Global Positioning System) surveying is an effective method using satellite measurement system and can be applied to construction of digital map of irrigation canal networks. In this study, GPS surveying method for irrigation structures was developed. A selected main canal of an irrigation district were surveyed by GPS. The obtained surveying results were corrected by post-processed DGPS (Differential Global Positioning System) and imported to GIS for the digital map construction.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2003.11a
• /
• pp.139-143
• /
• 2003

Digital Image와 휘도 측정치의 보정실험을 행하여 만족스러운 결과를 가져왔다. 그러나 피사체의 밝기에 비해 노출값을 너무 적게 하면 오차가 발생할 수 있다는 사실이 확인되었다. 앞으로 Videophotometry을 실현하기 위해서는 피 계측면의 분광 반사특성에 의한 계측치의 오차를 제거하기 위한 CCD 소자의 시감도 보정, 시야를 정확하게 재현하기 위한 광학적 연구, 인간의 시각 특성에 부합하는 측정 휘도의 보정 등에 대한 연구가 이루어져야 할 것이다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.4
• /
• pp.36-45
• /
• 2008

LYNX ESM system operates digital receiver for analyzing radar of intrapulse modulation signal. This paper contains DC offset compensation method of IQ channels, imbalancing comensation method of amplitude and phase, precisional PW measurement using adaptive threshold set, analyzing algorithm of intrapulse modulation signals. Its effectiveness was proven by technical and operational test.