• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.3
• /
• pp.1-6
• /
• 2004

Recently the examples of a designing a building-lighting to which LED, a solid state Lighting, is applied are increasing in number, but the development of lighting apparatus and the techniques applied to a designing lighting apparatus frequently don't fit to a new source of light. This essay refers to the matters relevant to the techniques for designing a lighting, which are controlled with a digital technology, and the effectiveness of a "Interactive-lighting technique" which has a ductility by a sensor with developing a digital source of light module and applying it to a real designing a building-lighting . In the negative aspect that a digital technology can standardize a space for a lighting, a "Interactive-lighting Technique", which detects an analogic change of nature through a sensor and produces it, can become a new alternative one.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.413-416
• /
• 1998

Sensitivity and calibration considerations are most important in the design and implementation of real control systems. Ideally parameter changes due to various causes should not appreciably affect the system's performances. But all the values of physical components of the plants and controllers as well as the relevant environmental conditions change in time, thus the output performance can be deteriorated during the operating span of the system. Naturally the duty of calibration or the prevention of performance deterioration due to excessive component sensitivity should be provided to the control system. In this paper, we propose a digital controller which has the capability of calibration and gain adjustment as well as the execution of control law. Specifically the problems of gain adjustment and offset calibration in the light source and CdS sensor module for position measurement in a flexible link system are considerably resolved. The parameters of measurement module are prone to change due to environmental brightness conditions resulting in poor steady state performance of the overall control system. Thus a proper method is necessary to provide correction to the changed values of gain and offset in the position measurement module. The proposed controller, whenever necessary, measures the open-loop characteristics, andthen calculates the offset and sensor gain correction values based on the prepared standard measurements. It is applied to the control of a flexible link system with the gain and offset calibration porblems in the light sensor module for position to show the applicability.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.2
• /
• pp.13-20
• /
• 2014

In this paper, we implemented the object scanning with nxtOSEK which is an open source platform. nxtOSEK consists of device driver of leJOS NXJ C/Assembly source code, TOPPERS/ATK(Automotive real time Kernel) and TOPPERS/JSP Real-Time Operating System source code that includes ARM7 specific porting part, and glue code make them work together. nxtOSEK can provide ANSI C by using GCC tool chain and C API and apply for real-time multi tasking features. We experimented the 3D scanning with ultra sonic and laser sensor which are made directly by laser module diode and experimented the measurement of scanning the object by knowing x, y, and z coordinates for every points that it scans. In this paper, the laser module is the dimension of $6{\times}10[mm]$ requiring 5volts/5[mW], and used the laser light of wavelength in the 650[nm] range. For detecting the object, we used the beacon detection algorithm and as the laser light swept the objects, the photodiode monitored the ambient light at interval of 10[ms] which is called a real time. We communicated the 3D scanning platform via bluetooth protocol with host platform and the results are displayed via DPlot graphic tool. And therefore we enhanced the functionality of the 3D scanner for identifying the image scanning with laser sensor modules compared to ultra sonic sensor.

• Proceedings of the IEEK Conference
• /
• 2000.06e
• /
• pp.51-54
• /
• 2000

We are concerned with processing methods of the measurement values of sensors in the control system. When some faults happen to sensor components, the measurement value of sensors cause the malfunction of the plant. So it is necessary to detect and reduce the influence of faults to control with reliability for the overall system. The sensor status must be always good for best demonstration of the controller performance. A self-validating sensor detects the sensor state from the measurement value, reconstruct a soft sensor and can improve reliability of the sensor. If sensor faults, the sensor is detected and reconstructed with the best estimate from its correlation to other sensors and historical data. It is applied to the control of a flexible link system with the sensor fault problems in the light sensor module for position to show the applicability. In this paper, we propose a digital controller which reduces deflection of the moving set-point by reconstructing output of a sensor when the sensor fault is detected.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.797-798
• /
• 2012

The purpose of this study to embody LED visible light communication visual signal delivery system based on TFT-LCD module and to analyze a performance for digital signals. LED lighting enables to transmit data through light, to embody visible light communication, and to control lights in different wavelengths according to LED materials and structural materials. In this study, we aim to create a transmitting and receiving sensor that has implemented LED and visual sensors to LED efficiency and existing TFT-LCD module so as to estimate and indicate a communication distance and to find out application methods and problems. Also, by implementing TFT-LCD technology and next-generation LED visual communication technology, this study aims to check the possibility of technological realization by applying them to various means of communication including ubiquitous communication.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.6
• /
• pp.31-38
• /
• 2009

To improve the image quality and lower the power consumption of the mobile applications, it is the one of the best candidate to control the backlight unit of the LCD module with ambient light. Ambient light sensor and readout circuit were integrated in LCD panel for the mobile applications, and we designed them with LTPS TFT. We proposed noble start-up correction in order to correct the variation of the photo sensors in each panel. We used time-to-digital method for converting photo current to digital data. To effectively merge time-to-digital method with start-up correction, we proposed noble dual slope correction method. The entire readout circuit was designed and estimated with LTPS TFT process. The readout circuit has very simple and stable structure and timing, so it is suitable for LTPS TFT process. The readout circuit can correct the variation of the photo sensors without an additional equipment, and it outputs the 4-levels digital data per decade for input luminance that has a dynamic range of 60dB. The readout rate is 100 times/sec, and the linearity error for digital conversion is less than 18%.

• Journal of Korean Society for Geospatial Information Science
• /
• v.25 no.1
• /
• pp.71-78
• /
• 2017

Many studies have been implemented to manage solar plant being supplied widely in recent years. This study analyzed heat emission of solar cell using unmanned aerial vehicle(UAV)-based thermal infrared sensor, and major conclusions are as belows. Firstly, orthomosaic image and digital surface model(DSM) data were acquired using UAV-based RGB sensor, and solar light module layer necessary to analyze the heat emission of solar cell was constructed by these data. Also as a result of horizontal error into validation points using virtual reference service(VRS) survey for evaluating the location accuracy of solar light module layer, higher location accuracy could be acquired like standard error of $dx={\pm}2.4cm$ and $dy={\pm}3.2cm$. And this study installed rubber patch to test the heat emission of solar cell and could analyzed efficiently the location of rubber patch being emitted heat using UAV-based thermal infrared sensor. Also standard error showd as ${\pm}3.5%$ in analysis between calculated cell ratio by rubber patch and analyzed cell ratio by UAV-based thermal infrared sensor. Therefore, it could be efficiently analyzed to heat emission of solar cell using UAV-based thermal infrared sensor. Also efficient maintenance of solar plant could be possible through extracting the code of solar light module being emitted of heat automatically.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.191-194
• /
• 2005

This paper represents an intelligent sensor controller of mobile robot for object recognition in an indoor known environment. A range finder sensor module has been developed by using optic PSD (Position Sensitive Detector) sensor array at a low price. While PSD sensor is cost effective and light weighting, it has switching noise and while noise. To remove these noises, we propose a heuristic filter. For line-based map building, also we proposed advanced Hough transformation and navigation algorism. Some experiments were illustrated for the validity of the developed system.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.10a
• /
• pp.187-190
• /
• 1998

The values of physical components of the plants and controllers as well as the relevant environmental conditions change in time, thus the output performance can be deteriorated during the operating span of the system. Naturally the duty of calibration or the prevention of performance deterioration due to excessive component sensitivity should be provided to the control system. The proposed controller, whenever necessary, measures the open-loop and close-loop characteristics, and then calculates the offset and sensor gain correction values based on the prepared standard measurements It is applied to the control of a flexible link system with the gain and offset calibration problems in the light sensor module for position to show the applicability. In this paper, we propose a digital controller which has the capability of calibration gain and offset adjustment using fuzzy methods.

• Journal of the HCI Society of Korea
• /
• v.1 no.2
• /
• pp.43-50
• /
• 2006

A mirror is a familiar tool for human beings who have been seeing themselves through it for a long time since it was created. As evolving Digital Technology, many approaches about digital mirrors which reflect not only the light, but also the information have been studied. Traditional mirrors on the wall do not need any special control to perform their automatic visual feedbacks, reflecting lights. On the contrary, digital mirrors can actively provide more information to the user than the traditional ones. In this paper, we propose an active digital mirror system of which functions are changed according to the user-mirror distance. First of all, we investigated users' behaviors on mirrors and categorized the interactions by user-mirror distance. Based on the previous result, we designed the user interface of the mirror, and developed a prototype which has three recognition modules: a distance measuring module using infrared sensor arrays, a user recognition module by computer vision technique, and a control perception module using infrared sensor grid. In addition, the next steps for improving the user-centered digital mirror system, and the possibility for developing a mirror-shaped computer system were suggested.