• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.708-713
• /
• 1997

A remote data communication system for monitoring of NC machine fault diagnosis and status is developed. This system communicates with host PC by using dial-up communication method on PSTN. The developed system consists of (1)remote communication module among NC's and host PC using PSTN, (2) 8 channels analog data sensing module, (3) digital I/O module for control of NC machine, (4) communication module between NC machine and remote data communication system using RS-232c, and (5) Software man-machine interface. This system may be applied for remote sensing of the status in Fms. To show the veridity of the developed system, several examples are illustrated.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.03a
• /
• pp.148-153
• /
• 1998

In order to control thermal deformation of machine origin of machine tools due to internal and external heat sources, the real-time compensation system has been developed. First, GMDH models were constructed to estimate thermal deformation of machine origin for a vertical machining center through the measurement of deformation data and temperature data of specific points on the machine tool. Thermocouples and gap sensors are used respectively for measurement. These models are nonlinear equations with high-order polynomials and implemented in a multilayered perceptron type network structure. Secondly, work origin shift method were developed by implementing digital I/O interface board between CNC controller and IBM-PC. The work origin shift method is to shift the work origin by the compensation amounts which is calculated by pre-established GMDH model. From the experimental result, thermal deformation of machine origin was reduced to below $\pm$5${\mu}{\textrm}{m}$.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.08a
• /
• pp.165-168
• /
• 1998

제안하고 있는 CSD17C00 chip은 C&S technology에서 개발한 것으로, 음성 신호 처리를 위해 범용으로 구현되었으며, 16 bit 40 MIPS DSP group OAK DSP Core를 포함, 이에 Miscellaneous Logic, Serial Port, Host Interface, Timer, Compander 의 5가지 Peripherals 과 범용 I/O Ports 로 설계되었다. 1차적으로 CSD17C00 Chip 의 성능을 점검하였다. 그 결과, 응용 프로그램은 28MIPS의 계산속도를 갖으며, 프로그램 ROM 크기는 8.85KWords 이고, 10KWords 의 데이터 ROM 과 4KWords 데이터 RAM을 필요로 한다. CSD17C00 CHIP은 멀티미디어 통신용 VOCODER 개발을 위한 범용성을 갖추고 있으며, VOCODER 용 S/W 개발 환경 및 H/W 구조가 여타 범용 DSP에 비해편의성고 K합리성을 제공하도록 설계되어 있다. 따라서, 이를 이용한다면, 멀티 미디어 통신용 VOCODER, INTERNET PHONE CO-PROCESSOR, DIGITAL RECODER, MPEG AUDIO ENCODER & DECODER 등 다양한 제품으로의 응용이 가능할 것으로 전망된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.165-170
• /
• 1992

In this paper, the Hardware-In-The-Loop Simulation(HILS) of missile systems are studied. The HILS is an effective performance evaluation technique that bridges the simulation fidelity gap between analytic all-digital simulations and actual flight tests of missile systems. The HILS may be required to perform system integration tests, performance evaluation at system or subsystem level. Major elements of this HILS facility will include the flight table, simulation computers, I/O computer and peripheral equipments. HILS of missile systems typically involve computer modeling of flight dynamics coupled with a hardware guidance and control(G/C) systems. This paper describes a real time performance evaluation technique of a G/C system, Development of a HILS for a Autopilot of SAM G/C will be used as an example.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.1
• /
• pp.19-25
• /
• 1998

Remote fault diagnosis and maintenance system using general telecommunication network is necessary for an effective fault diagnosis and higher productivity of NC machine tools. In order to monitor machine tool condition and diagnose alarm states due to electrical and mechanical faults, a remote data communication system for monitoring of NC machine fault diagnosis and status is developed. The developed system consists of (1) remote communication module among NC's and host PC using PSTN. (2) 8 channels analog data sensing module, (3) digital I/O module for control or NC machine, (4) communication module between NC machine and remote data communication system via RS-232C, and (5) software man-machine interface. Diagnostic monitoring results generated through a successive type inference engine are displayed in user-friendly graphics. The validity and reliability of the developed system is verified to be a powerful commercial version on a vertical machining center through a series of experiments.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.3E
• /
• pp.13-18
• /
• 1996

A real-time identifier for the nonstationary time-varying signals and systems was implemented using a low cost DSP (digital signal processing) chip. The identifier is comprised of I/O units, a central processing unit, a control unit and its supporting software. In order t estimate the system accurately and to reduce quantization error during arithmetic operation, the firmware was programmed with 64-bit extended precision arithmetic. The performance of the identifier was verified by comparing with the simulation results. The implemented real-time identifier has negligible quantization errors and its real-time processing capability crresponds to 0.6kHz for the nonstationary AR (autoregressive) model with n=4 and m=1.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.871-876
• /
• 2001

One-touch fittings are important components that can make a quick and tight connection between pneumatic pipe systems. In this study, the stress analyses with various working pressures on these one-touch fittings are carried out using finite element method. Material properties, to use the stress analyses, are measured by the universal tester and digital Vickers hardness tester. The stress analyses on the circular shell spring forced by various pressures(100, 150, 200, 250kpa) and on the main body due to the fluid-structural interaction are investigated. Results show that the stresses of one-touch fitting are concentrated to supported part of main body and the soundness of a circular shell spring with maximum pressure 250kpa was confirmed.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.1108-1112
• /
• 2005

Recently, the fuel charge is accounted for very high in the navigation cost. Therefore Shipowner is tried to find method for reducing oil consumption. ERCS(Energy Reduced Cooling System) is one of the method. The ERCS algorithm operates to decrease a power consumption of main sea water cooling pump through inverter control. We have developed ERCS controller with algorithm. The ERCS controller consists of CPU board, Digital I/O board, A/D board, D/A board and LCD/SW board. We tested with dummy signal to confirm the algorithm working correctly and achieved the good results. Before soon we will test under real condition in the ship and expect to get the result as forecasted.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.467-469
• /
• 2006

최신의 디지털 방식 UPS(Uninterruptible Power Supply)는 10여 년 전의 아날로그 UPS에 비해 많은 설계 요인들로 인해 복잡해지고 있다. 고속-고성능의 DSP(Digital Signal Process), 다수의 I/O를 위한 FPGA(Field-Programmable Gate Array), 다기능의 사용자 인터페이스 그리고 다양한 통신 등이 그 예라고 할 수 있다. 임베디드 디자인이 이렇게 복잡해지면서 하드웨어나 소프트웨어를 신뢰성 있게 테스트하기에 기존 방법으로는 충분치 않게 되었다. 본문에서는 NI(National Instruments)의 버추얼 인스트루먼트(Virtual Instrument) 기술을 이용하여 자동화된 테스트 시스템에 대해 기술한다.

• Animal Systematics, Evolution and Diversity
• /
• v.29 no.2
• /
• pp.184-187
• /
• 2013

Korean species of the genus Elampus Spinola is taxonomically reviewed. Korean fauna of the genus Elampus was known by one sepcies, Elampus bidens (F$\ddot{o}$rster). This study reports new discover of another Korean species E. musashinus (Tsuneki). This species was described based on male, and the female has been still unknown. With comparison of partial mitochondrial cytochrome c oxidase I gene sequences, the sex-association of this species is established, the Korean specimens of both sexes completely identical in their sequences targeted. Herein the female description of E. musashinus is presented for the first time. A key to the Korean species, as well as diagnosis and digital images are provided.