• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2587-2589
• /
• 1999

In this paper, we propose a new control scheme for a PWM inverter using digital control. Digital control has various advantages in comparison with conventional analogue control. It can achieve high frequency switching of inverter and can be little influenced for temperature variations and aging of devices. This digitally-controlled PWM inverter is implemented using a Digital Signal Processor(DSPTMS320F240). The simulation results are given to verify the DSP based PWM inverter design and implementation.

• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.2184-2186
• /
• 1997

Potential-source controlled rectifier excitation system has been developed by KEPRI for synchronous generator in YOUNG-DONG thermal power plant. This paper describes the characteristics of redundant control system and transfer function of dual channel excitation control system. This system has been using a analog and digital circuit devices(hybrid type)

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.35 no.3
• /
• pp.328-334
• /
• 1999

A fish pump makes very important roles in an automation system of an aquaculture farm, thus it has been used widely in order to transfer fishes from one place to the other place automatically. In spite of its significant roles, the efforts for developing performance and promoting efficiency of the fish pump are not sufficient yet. In this paper, a method which makes the fish pump automation system is suggested. Automation of the fish pump can be accomplished by using variable voltage and variable frequency inverter system including induction motors. Especially, very simple logic to generate Pulse width Modulation(PWM) wave to control induction motor efficiently and three steps speed control method to regulate liquid quantity of the fish pump simply are suggested. Owing to the simplifies speed control and PWM wave generation technique, a cheaper microprocessor, 80C196KC, than a digital signal Processor(DSP) can be used to operate control algorithm in induction motor systems for real time control Also, a new idea of remote control for the simplifies novel inverter system by Programmable logic Controller(PLC) without special output unit, digital to analog converter(D/A), is suggested in this paper. Consequently the function of reliability, availability and serviceability of the fish pump system are developed. It will be expected to contribute expanding of application of the fish pump in aquaculture farms because the system can reduce energy consumption and some difficulties according to manual operation prominently.

• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3319-3326
• /
• 2021

As a form of industrial control systems (ICS), nuclear instrumentation and control (I&C) systems have been digitalized increasingly. This has raised in turn cyber security concerns. Cyber security for ICS is important because cyber-attacks against ICS can cause not only equipment damage and loss of production but also personal and public safety hazards unlike in general IT environments. Numerous risk analyses have been carried out to enhance the safety of ICS and recently, many studies related to the cyber security of ICS are being conducted. Many existing risk analyses and cyber security studies have considered safety and cyber security separately. However, both safety and cyber security perspectives should be considered when analyzing risks for complex and critical ICS facilities such as nuclear power plants (NPPs). In this paper, the STPA-SafeSec methodology is selected to consider both safety and security perspectives when performing a risk analysis for NPPs in order to assess impacts on the safety by cyber-attacks against the digital I&C systems. The STPA-SafeSec methodology was applied to a test-bed system that simulates a condensate water (CD) system in an NPP. The process of the application up to the development of mitigation strategies is described in detail.

• Nuclear Engineering and Technology
• /
• v.55 no.1
• /
• pp.25-36
• /
• 2023

Nuclear power plants have recognized the importance of nuclear cybersecurity. Based on regulatory guidelines and security-related standards issued by regulatory agencies around the world including IAEA, NRC, and KINAC, nuclear operating organizations and related systems manufacturing organizations, design companies, and regulatory agencies are considering methods to prepare for nuclear cybersecurity. Cryptographic algorithms have to be developed and applied in order to meet nuclear cybersecurity requirements. This paper presents methodologies for validating cryptographic algorithms that should be continuously applied at the critical control system of I&C in NPPs. Through the proposed schemes, validation programs are developed in the PLC, which is a critical system of a NPP's I&C, and the validation program is verified through simulation results. Since the development of a cryptographic algorithm validation program for critical digital systems of NPPs has not been carried out, the methodologies proposed in this paper could provide guidelines for Cryptographic Module Validation Modeling for Control Systems in NPPs. In particular, among several CMVP, specific testing techniques for ECB mode-based block ciphers are introduced with program codes and validation models.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.8
• /
• pp.1130-1133
• /
• 2021

In this paper, a miniaturized sensor interface circuit for the respiration detection system is proposed. Respiratory diagnosis is one of the main ways to predict various diseases. The proposed system consists of respiration detection sensor, temperature sensor, and interface circuits. Electrochemical type gas sensor using solid electrolytes is adopted for respiration detection. Proposed system performs sensing, amplification, analog-to-digital conversion, digital signal processing, and i2c communication. And also proposed system has a small form factor and low-cost characteristics through optimization and miniaturization of the circuit structure. Moreover, technique for sensor degradation compensation is introduced to obtain high accuracy. The size of proposed system is about 1.36 cm².

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9B
• /
• pp.1608-1615
• /
• 1999

In this study, we investigate the inter cell interference of LMDS(Local multipoint Distribution Service) system cell in LMDS system design process. There are several interference sources in LMDS system but we consider co-channel adjacent interference, cross-polarization interference, tx/rx interworking interference as three major factors. As the summation of each interference, C/N is keep 19 dB in 2km range but decreased gradually over 2km. Based on theoretical results, we process the experimental test and get results that C/I=20 dB have to be maintained to transmit the data successfully under rain fall attenuation condition. This experiential results are similar to the theoretical analysis results we examined.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.9C
• /
• pp.810-819
• /
• 2007

The I/Q unbalance which is generated by non-ideal components such as a $90^{\circ}$ phase shifter and I/Q filters is an inevitable physical phenomenon and leads to performance degradation when we implement a coherent two-dimensional (2-D) modulation/demodulation system. This paper provides an exact and general expression for the SEP(symbol error probability) of DVB-S2 system with I/Q phase and amplitude unbalance over AWGN channel. Coordinate rotation and shift techniques used to redefine a received signal are key mathematical tools. In conclusion, the derived result is expressed as a linear combination of the 2-D Gaussian Q-functions.

• Nuclear Engineering and Technology
• /
• v.44 no.4
• /
• pp.421-428
• /
• 2012

Analog instrument and control systems in nuclear power plants have recently been replaced with digital systems for safer and more efficient operation. Digital instrument and control systems have adopted various fault-tolerant techniques that help the system correctly and safely perform the specific required functions regardless of the presence of faults. Each fault-tolerant technique has a different inspection period, from real-time monitoring to monthly testing. The range covered by each faulttolerant technique is also different. The digital instrument and control system, therefore, adopts multiple barriers consisting of various fault-tolerant techniques to increase the total fault detection coverage. Even though these fault-tolerant techniques are adopted to ensure and improve the safety of a system, their effects on the system safety have not yet been properly considered in most probabilistic safety analysis models. Therefore, it is necessary to develop an evaluation method that can describe these features of digital instrument and control systems. Several issues must be considered in the fault coverage estimation of a digital instrument and control system, and two of these are addressed in this work. The first is to quantify the fault coverage of each fault-tolerant technique implemented in the system, and the second is to exclude the duplicated effect of fault-tolerant techniques implemented simultaneously at each level of the system's hierarchy, as a fault occurring in a system might be detected by one or more fault-tolerant techniques. For this work, a fault injection experiment was used to obtain the exact relations between faults and multiple barriers of faulttolerant techniques. This experiment was applied to a bistable processor of a reactor protection system.

• ETRI Journal
• /
• v.27 no.5
• /
• pp.585-594
• /
• 2005

A small electronic nose (E-Nose) system has been developed using an 8-channel vapor detection array and personal digital assistant (PDA). The sensor array chip, integrated on a single microheater-embedded polyimide substrate, was made of carbon black-polymer composites with different kinds of polymers and plasticizers. We have successfully classified various volatile organic compounds such as methanol, ethanol, i-propanol, benzene, toluene, n-hexane, n-heptane, and c-hexane with the aid of the sensor array chip, and have evaluated the resolution factors among them, quantitatively. To achieve a PDA-based E-Nose system, we have also elaborated small sensor-interrogating circuits, simple vapor delivery components, and data acquisition and processing programs. As preliminary results show, the miniaturized E-Nose system has demonstrated the identification of essential oils extracted from mint, lavender, and eucalyptus plants.