• 제목/요약/키워드: Digital Filtering

검색결과 610건 처리시간 0.022초

SIP 플러딩 탐지 차단 실험방법에 대한 연구 (An Experimental study on the Method of Detection and Blocking against SIP Flooding)

  • 최희식;박재표;전문석
    • 디지털산업정보학회논문지
    • /
    • 제7권2호
    • /
    • pp.39-46
    • /
    • 2011
  • Privacy IP hacking problems such as invasion of privacy, password cracking, voice wiretapping and internet over charged occurred, because VoIP internet voice phone service gradually spread. This thesis attempted to attack the VoIP service network by application. First use application to spoof IP address then attempted wiretap the VoIP service and sends a lot of messages to disturb service movement. At this point, we connected VoIP soft terminal, so we can operate real-time filtering operator to block the SIP Flooding offence by monitor the traffic and detect the location where it got attacked. This thesis used experiment to prove it is possible to detect the offence and defend from SIP Flooding offence.

적응 디지탈 필터와 DSP 칩을 이용한 폐음 분석기 설계 (Design of Lung Sound Analyzer Using Adaptive Digital Filter and DSP Chip)

  • 김규한;조일준
    • 대한의용생체공학회:의공학회지
    • /
    • 제10권2호
    • /
    • pp.151-156
    • /
    • 1989
  • 본 연구에서는 폐 및 기관지 질환 환자에 대한 객관적인 진단을 위한 폐음분석 시스템을 설계하였다. 적응 필터링 기법에 의하여 순수한 폐음을 분리하였고 이의 power spectrum을 구하기 위하여 TMS320C25 DSP 칩과 IBM PC를 사용해서 폐음 분석기를 구성하였다. 실험결과 적응 격자 위너 필터는 10차의 적은 차수로도 분리가 가능하였고 정상 폐음은 100-200 Hz, 급성 섬유성 폐렴폐음(crackle)은 100-400 Hz, 기관지 협착증(wheeze)폐음은 150-600 Hz에서 주파수범위를 갖는 power spectrum의 양상을 통해 각각 패턴 분류할 수 있었다.

  • PDF

DC 급전 전철시스템에서의 능동전력필터 기준보상전류 추정 (Reference compensating current estimation for active power filters in DC traction system)

  • 배창한
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
    • /
    • pp.224-226
    • /
    • 2004
  • Digital Kalman filter is presented as a powerful approach to obtain the reference estimation of the control current for shunt active power filter. This algorithm provides the best estimate of the fundamental and harmonic frequency components from the sampled values of the line current or voltage. By adopting of the digital Kalman filtering algorithm, the structure of the control algorithm eliminates the need of a Phase locked loop(PLL) for the synchronization of the reference signal used in the compensation and it not sensitive to the distortion of the line voltage. The effectiveness of the algorithm is confirmed by the computer simulations.

  • PDF

Low-Cost High-Performance TDD Synchronizer for WiBro RF Repeater

  • Seo, Young-Ho;Kim, Dong-Wook
    • ETRI Journal
    • /
    • 제32권4호
    • /
    • pp.503-511
    • /
    • 2010
  • WiBro radio frequency (RF) repeater is used for solving the problem of partial shadow areas in the wireless communication field that uses time-division duplexing (TDD) mode. In this paper, a method to efficiently generate TDD signals for WiBro RF repeater is proposed and its digital circuit is implemented. A TDD signal is detected from RF signals transmitted/received to/from RF repeater and then inputted again into the RF repeater, so that it can operate normally. First, the envelope of downlink signals is detected and then clamped to extract the basic form of a TDD signal using an operational amplifier circuit. Next, the TDD signal is generated by restoring and filtering the shape which has been distorted by the wireless channel. The algorithm and system to acquire TDD signal are developed with a goal to have simple but powerful functions with as little cost as possible. The proposed method is implemented as an RF-digital integrated system and verified through the experiments under the same condition as actual WiBro service environment.

Halftoning Method by CMY Printing Using BNM

  • Kim, Yun-Tae;Kim, Jeong-Yeop;Kim, Hee-Soo;Yeong Ho ha
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2000년도 ITC-CSCC -2
    • /
    • pp.851-854
    • /
    • 2000
  • Digital halftoning is a technique to make an equivalent binary image from scanned photo or graphic images. Low pass filtering characteristic of human visual system can be applied to get the effect of spatial averaging of local area consisted of black and white pixels for gray image. The overlapping of black dot decreases brightness and black dot is very sensitive to human visual system in the bright region. In this paper, for gray-level expression, only bright gray region in the color image is considered for blue noise mask (BNM) approach. To solve this problem, BNM with CMY dot is used for the bright region instead of black dot. Dot-on-dot model with single mask causes the problem making much black dot overlap, color distortion. Therefore approach with three masks for C, M and Y each is proposed to decrease pixel overlap and color distortion.

  • PDF

LANDSAT DATA의 映像處理手法에 의한 서울-東豆川 간의 LINEAMENT 硏究 (A Geological Study on the Seoul-Dongducheun Lineament Using Digital Image Processing Teachniques of Landsat Data)

  • 姜必鍾;智光薰;曺民肇;崔映燮
    • 대한원격탐사학회지
    • /
    • 제1권1호
    • /
    • pp.39-51
    • /
    • 1985
  • The study was emphasized on application of the digital image processing techniques for lineament analysis. The major lineament of the study area belongs to Choogaryong faults which many geologists have studied since 1903. Also the lineament is so significant in geological views, because the lineament runs through Seoul area. The several image processing methods such as gradient, Laplacian and spatial filter have been applied, and the spatial filtering is most suitable method for lineament analysis among them. The lineaments distribute predominently in the N20.deg.-30.deg.E trend and N80.deg.-90.deg.W trend which have the conjugated relationship each other, and it coincides with the Gyeongsang conjugate system. The circular structure of study area was developed by cooling circular joint.

Wavelet-Based Digital Image Watermarking by Using Lorenz Chaotic Signal Localization

  • Panyavaraporn, Jantana;Horkaew, Paramate
    • Journal of Information Processing Systems
    • /
    • 제15권1호
    • /
    • pp.169-180
    • /
    • 2019
  • Transmitting visual information over a broadcasting network is not only prone to a copyright violation but also is a forgery. Authenticating such information and protecting its authorship rights call for more advanced data encoding. To this end, electronic watermarking is often adopted to embed inscriptive signature in imaging data. Most existing watermarking methods while focusing on robustness against degradation remain lacking of measurement against security loophole in which the encrypting scheme once discovered may be recreated by an unauthorized party. This could reveal the underlying signature which may potentially be replaced or forged. This paper therefore proposes a novel digital watermarking scheme in temporal-frequency domain. Unlike other typical wavelet based watermarking, the proposed scheme employed the Lorenz chaotic map to specify embedding positions. Effectively making this is not only a formidable method to decrypt but also a stronger will against deterministic attacks. Simulation report herein highlights its strength to withstand spatial and frequent adulterations, e.g., lossy compression, filtering, zooming and noise.

Modified Gaussian Filter based on Fuzzy Membership Function for AWGN Removal in Digital Images

  • Cheon, Bong-Won;Kim, Nam-Ho
    • Journal of information and communication convergence engineering
    • /
    • 제19권1호
    • /
    • pp.54-60
    • /
    • 2021
  • Various digital devices were supplied throughout the Fourth Industrial Revolution. Accordingly, the importance of data processing has increased. Data processing significantly affects equipment reliability. Thus, the importance of data processing has increased, and various studies have been conducted on this topic. This study proposes a modified Gaussian filter algorithm based on a fuzzy membership function. The proposed algorithm calculates the Gaussian filter weight considering the standard deviation of the filtering mask and computes an estimate according to the fuzzy membership function. The final output is calculated by adding or subtracting the Gaussian filter output and estimate. To evaluate the proposed algorithm, simulations were conducted using existing additive white Gaussian noise removal algorithms. The proposed algorithm was then analyzed by comparing the peak signal-to-noise ratio and differential image. The simulation results show that the proposed algorithm has superior noise reduction performance and improved performance compared to the existing method.

항공 LiDAR 원자료 필터링 조건에 따른 산림지역 수치표고모형 정확도 평가 (The Accuracy Evaluation of Digital Elevation Models for Forest Areas Produced Under Different Filtering Conditions of Airborne LiDAR Raw Data)

  • 조승완;최형태;박주원
    • 농업생명과학연구
    • /
    • 제50권3호
    • /
    • pp.1-11
    • /
    • 2016
  • 3차원 지형정보를 얻기 위하여 항공 LiDAR(Light Detection and Ranging)자료 기반 수치표고모델(Digital Elevation Model, DEM) 생성에 대한 연구들에 대한 관심이 지속적으로 높아져 왔다. 항공 LiDAR 원자료로부터 정확도가 높은 DEM을 생성하기 위해서는 3차원 점군에서 비지면점을 제외시키고 지면점만을 포함시키는 필터링(filtering)과정이 중요하다. 특히, 필터링을 구성하는 알고리즘의 패러미터 값 변화에 따라 산출되는 결과물들에 차이가 발생하고 정확도에 영향을 준다. 따라서 본 연구는 화천, 양주, 경산 및 장흥 유역 대상지의 항공 LiDAR 자료로부터 Fusion 소프트웨어를 이용하여 LiDAR DEM을 생성하는 GroundFilter알고리즘의 Mean패러미터(GFmn) 수준 변화가 LiDAR DEM 결과물의 정확도에 어떤 영향을 주는지 분석하였다. GFmn 수준 변화에 따른 정확도에 대한 영향 여부를 분석하기 위해 일원배치분산분석을 실시하였고, 그 결과 GFmn의 수준 변화에 따라 정확도에 대한 영향이 유의미하게 나타났다(F-value: 4.915, p<0.01). 이 후 각각의 GFmn 수준들을 다른 수준들과 차이가 있는지 여부로 묶기 위하여 사후검정을 실시하였다. 사후분석을 통해 잔차의 평균 차이에 따라 '7, 5, 9, 3'과 '1' 두 집단으로 나뉘었다. 아울러 보다 정확한 해발고도를 표현하는 LiDAR DEM 생성하는데 적정 GFmn은 '7' 조건일 때로 나타났다. 이 연구를 통해 보다 정확한 해발고도를 표현하는 LiDAR DEM을 생성할 수 있는 패러미터 값을 제안하였다.

A Study on the Measurement for the Nano Scale Film Formation of Ultra Low Aspect Ratio

  • Jang Siyoul;Kong Hyunsang
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 2004년도 학술대회지
    • /
    • pp.283-288
    • /
    • 2004
  • The measurement of ultra low aspect ratio fluid film thickness is very crucial technique both for the verification of lubrication media characteristics and for the clearance design in many precision components such as MEMS, precision bearings and other slideways. Many technologies are applied to the measurement of ultra low aspect ratio fluid film thickness (i.e. elastohydrodynamic lubrication film thickness). In particular, in-situ optical interferometric method has many advantages in making the actual contact behaviors realized with the experimental apparatus. This measurement method also does the monitoring of the surface defects and fractures happening during the contact behavior, which are delicately influenced by the surface conditions such as load, velocity, lubricant media as well as surface roughness. Careful selection of incident lights greatly enhances the fringe resolutions up to $\~1.0$ nanometer scale with digital image processing technology. In this work, it is found that coaxial aligning trichromatic incident light filtering system developed by the author can provide much finer resolution of ultra low aspect ratio fluid film thickness than monochromatic or dichromatic incident lights, because it has much more spectrums of color components to be discriminated according the variations of film thickness. For the measured interferometric images of ultra low aspect ratio fluid film thickness it is shown how the film thickness is finely digitalized and measured in nanometer scale with digital image processing technology and space layer method. The developed measurement system can make it possible to visualize the contact deformations and possible fractures of contacting surface under the repeated loading condition.

  • PDF