• 센서학회지
• /
• 제9권3호
• /
• pp.190-195
• /
• 2000

본 논문에서는 실내의 공기 흐름을 간단하게 측정할 수 있는 정온도형 디지털 열박막 풍속계를 개발하였다. 센서의 출력전압은 풍속에 대해서 4제곱근에 비례하므로 마이크로프로세서와 A/D 컨버터를 사용하여 선형화 하였다. 제작한 풍속계의 출력 풍속값은 기준 풍속계와 비교한 결과 오차는 ${\pm}2%$이내였다. 제작한 풍속계를 풍속이 10m/sec이고 공기 온도가 $23^{\circ}C{\sim}60^{\circ}C$ 범위에서 온도 실험한 결과에서 온도에 대한 오차는 약 ${\pm}1%$ 이었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.260-261
• /
• 2006

This paper describes a real time digital simulation method for the application of HTS tape to power devices. At present, in order to extend the power capacity of some area which has a serious problem of power quality, especially metropolitan complex city. there are so many problems such as ROW for cable line routes, space for downtown substations, and the environmental protection, etc. HTS technology is one of the best solutions. Simulation is required for safety before install of HTS power cable, a fabrication model used at the power system simulation. Here, in this paper, authors developed an algorithm connected with HTS by using Real-Time Digital Simulator(RTDS).

• 한국컴퓨터정보학회논문지
• /
• 제4권2호
• /
• pp.27-38
• /
• 1999

본 논문에서는 캐리 전파가 없어 고속 연산이 가능한 잉여수체계(Residue Number System)를 이용하여 고속의 디지털 뉴런 프로세서를 제안하였다. 제안된 뉴런프로세서는 MAC (Multiply And Accumulator) 연산부, 몫연산부, 시그모이드(Sigmoid)함수 연산부로 구성되며, 0.8$\mu$m CMOS공정으로 설계되었다 실험결과, 본 논문에서 구현한 디지털 뉴런프로세서는 19.2nsec의 속도를 보였으며, 실수연산기로 구현한 뉴런프로세서에 비하여 약1/2정도 하드웨어 크기를 줄일 수 있었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.898-901
• /
• 2006

To fabricate mono layer green sheet (MLGS) of transparent dielectric for PDP front panel, dispersion of transparent dielectric slurry and various properties of green sheets were examined as a function of amount and kinds of organic additives. Sedimentation height and viscosity of slurry were measured to determine proper types and amount of dispersant in non-aqueous system transparent dielectric slurry. Many MLGS having various ratios of the transparent dielectric glass frit, binder and plasticizer were fabricated. Finally we got the transparent dielectric layer of high transparency and free from residual pore might be remained in the gap between the electrodes.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.345-348
• /
• 2006

The piezoelectric thick films were fabricated on silicon substrates by screen printing method. By developing a low-temperature sinterable piezoelectric composition and a new poling technique, we fabricated the high-performance piezoelectric thick films on silicon which can be applied for piezoelectric MEMS applications such as micropumps of the ink jet printer heads.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 춘계학술대회 논문집
• /
• pp.25-25
• /
• 2010

This paper describes the design and fabrication of a Risk Voltage Meter (RVM) which can analyze the step and touch voltages in grounding systems. The meter consists of a sine-wave power source which generates up to 300 [$V_{rms}$] in ranges of 45 [Hz]~1 [kHz], a 8 Ch. data acquisition module, and a personal computer. Also, a noise elimination method by a digital band-pass filter during measurement is proposed.

• 컴퓨터교육학회논문지
• /
• 제8권4호
• /
• pp.97-105
• /
• 2005

본 논문에서는 이산 대수 문제에 기반 한 부인봉쇄 디지털 다중서명 기법을 제안한다. 제안한 다중서명 기업은 부인봉쇄 성질을 만족하며 메시지 변조, 서명자들에 의한 다중서명 부정과 같은 능동적 공격에 안전하다. 여러 명의 선거관리자를 두는 전자선거 기법에 적용될 수 있으며, 부인봉쇄 성질을 만족하기 때문에 투표자와 선거관리자들 간의 분쟁을 해결할 수 있다. 제안한 기법은 선거관리 센터의 역할을 분산함으로써 기존의 전자선거보다 공정하며 사용자 중심의 전자선거를 가능하게 한다.

• 한국재료학회지
• /
• 제17권7호
• /
• pp.352-357
• /
• 2007

Since a pattern defects "repair" system using a diode pumped solid state laser for Flat Panel Display (FPD) was suggested, a lot of laser systems have been explored and developed for mass-production microfabrication process. A maskless lithography system using 405 nm violet laser and Digital Micromirror Device (DMD) has been developed for PDP and Liquid Crystal Display (LCD) Thin Film Transistor (TFT) photolithography process. In addition, a "Laser Direct Patterning" system for Indium Tin Oxide (ITO) for Plasma Display Panel(PDP) has been evaluated one of the best successful examples for laser application system which is applied for mass-production lines. The "heat" and "solvent" free laser microfabrications process will be widely used because the next-generation flat panel displays, Flexible Display and Organic Light Emitting Diode (OLED) should use plastic substrates and organic materials which are very difficult to process using traditional fabrication methods.

• Journal of Electrical Engineering and Technology
• /
• 제6권3호
• /
• pp.402-407
• /
• 2011

The current paper describes a simpler ground-type, single-plate electrowetting configuration for droplet transport in digital microfluidics without performance degradation. The simplified fabrication process is achieved with two photolithography steps. The first step simultaneously patterns both a control electrode array and a reference electrode on a substrate. The second step patterns a dielectric layer at the top to expose the reference electrode for grounding the liquid droplet. In the experiment, a $5{\mu}m$ thick photo-imageable polyimide, with a 3.3 dielectric constant, is used as the dielectric layer. A 10 nm Teflon-AF is coated to obtain a hydrophobic surface with a high water advancing angle of $116^{\circ}$ and a small contact angle hysteresis of $5^{\circ}$. The droplet movement of 1 mM methylene blue on this simplified device is successfully demonstrated at control voltages above the required 45 V to overcome the contact angle hysteresis.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권6호
• /
• pp.295-299
• /
• 2004

A new design technique of fabricating 40 GHz up-converter modules for digital microwave radios has been developed. The design of the up-converter module is based on unit circuit blocks, which are to be characterized using a special test fixture. The complete module design may be as simple as a cascade layout of these unit circuit blocks. Also, the 40 GHz up-converter module employs a new microstrip-to-waveguide transition and a tapped edge-coupled filter, which are less sensitive to fabrication tolerances.