• 한국디지털건축인테리어학회논문집
• /
• 제10권1호
• /
• pp.5-14
• /
• 2010

The change in the social paradigm has been directly reflected in design. Throughout the conversion of design paradigm based on ecological paradigm, ecological design and green design make it possible to sustain society and improve the quality of human life. Also, the conversion of design paradigm mean that it changed from Male-identified and Male-dominated design to feminism design, which emphasizes femininity. Because the characteristic of ecological design and feminism design can be understood in the same context. Feminism design is not the kind of design that embodies the stereotype of social gender but the design that reflects the femininity which can be conferred as emotional, intuitional, mutual, sharing, organic and natural. If the result of design recognizes the diversities and differences of the users -based on the female users' experiences and knowledge- and if the need and the requirement of the design are useful enough, through the unity with human environment and harmonious participation, Eco-design and Feminism design will use their abilities to sustain the society and to enhance the quality of human life.

• 한국항공우주학회지
• /
• 제49권11호
• /
• pp.933-940
• /
• 2021

위성탑재 영상레이다 시스템은 마이크로파를 방사하여 지상에서 되튕겨온 신호를 수신한다. 수신된 신호는 영상레이다 수신경로의 마지막에 위치한 디지털 수신기에서 디지털 신호로 변환된다. 변환된 디지털 신호는 필터링, 압축 및 포맷팅 과정을 거친다. 디지털 수신기의 신호처리 과정은 두 차례의 양자화로 수행된다. 첫 번째는 아날로그 신호를 디지털 신호로 변환하는 과정이고, 다른 하나는 BAQ를 이용한 압축과정이다. 양자화는 높은 비트에서 낮은 비트로 변환하는 과정으로 양자화 오차가 발생한다. 본 논문에서는 SNR 저하의 관점에서 디지털 수신기에서 수행되는 양자화의 영향성을 분석하였다.

• Journal of electromagnetic engineering and science
• /
• 제8권2호
• /
• pp.84-89
• /
• 2008

In a wireless channel above microwave frequency, rain attenuation is very important. In order to predict rain attenuation, 1-min. rain rate distribution is required. This paper discusses appropriate conversion methods to estimate 1-minute rain rate from that of other integration time. Based on the measurement data filed in ITU-R WP3J including ETRI data for 6 consecutive years, distributions of rain rate with 1-, 5-, 10-, 20-, 30-minute integration time were analyzed, both on the global and regional basis, and the parametric relationship between the statistical characteristics of 1-minute and other measurement data were investigated to deduce the conversion methods. It is shown that the global model works good with good accuracy for 5-, 10-, 20-min integration time, and the global model is also applicable globally with good accuracy for 5-, 10-, 20-min integration time. The global conversion model was adopted last year as an ITU-R document for new recommendation. The regional conversion model would also be very useful for locations of similar climatic zone.

• 대한전자공학회논문지
• /
• 제27권8호
• /
• pp.1255-1259
• /
• 1990

A new ripple analog-to-digital converter (ADC) has been developed. It consists of two parallel ADCs and a switching network. The circuit operates on the analog input signal in two serial steps. First, a coarse conversion is made to determine the most significant bits by the first parallel ADC. The resultant bits control the switching network to connect a series resistor segment, within which the analog signal is contained, to the second parallel ADC. At second step, a fine conversion is made to determine the least significant bits by the second parallel ADC. The circuit requires 2(2\ulcorner\ulcorner1) comparators, 2(2\ulcorner\ulcorner resistors, and 2(2\ulcorner\ulcorner swithches for N-bit resolution.

• Journal of information and communication convergence engineering
• /
• 제7권4호
• /
• pp.561-564
• /
• 2009

A cryptographic dongle, which is capable of transmitting encrypted voice signals over the CDMA/GSM voice channel, was designed and implemented. The dongle used PIC microcontroller for signals processing including analog to digital conversion and digital to analog conversion, encryption and communicating with the smart phone. A smart phone was used to provide power to the dongle as well as passing the encrypted speech to the smart phone which then transmits the signal to the network. A number of tests were conducted to check the efficiency of the dongle, the firmware programming, the encryption algorithms, and the secret key management system, the interface between the smart phone and the dongle and the noise level.

• 방송공학회논문지
• /
• 제16권5호
• /
• pp.824-833
• /
• 2011

In this paper, using the Rec. ITU-R P.1546 explaining a propagation prediction model in the VHF and UHF bands, we propose the analytical methodology for calculating the service distance and field strength for analogue and digital TV receivers. From the derived formulation of the receiver field strength, some computation results are presented and discussed in terms of the equivalent level of service caused by analogue to digital TV conversion. The suggested method is also applicable to the analysis of frequency coordination or compatibility from unwanted signal in VHF and UHF bands.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권3호
• /
• pp.531-537
• /
• 2004

In this paper, the static and dynamic characteristics in the sensor tube of a mass flow controller(MFC) were studied by experiments. In the sensor tube of MFC. the difference of temperature between inlet and outlet was necessary for calculating the mass flow rate. Therefore, the relations among flow rate, heat generated by heating wire. and sensor location were investigated to find optimized condition. Finally, the relation between sensor voltage through analog digital conversion(ADC) and flow rate in the sensor tube can be represented. Based on this study, static and dynamic characteristics of sensor tube can be used for design of mass flow controller.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.505-508
• /
• 2001

Currently there is much interested in removing latent charge that is caused to latent image effect and blurring of obtained image as well as reduction of x-ray conversion efficiency in digital radiography system. To remove latent charge a-Se film is irradiated by light with 3500 lux using halogen lamp and optical fiber. We measured dark current and photosensitivity to analyze removing effect of latent charge, then compared with and without light erasing method. The reduction of measured signal due to latent charge effect was 32.5 %, and the removal effect of latent charge by using light erase method was its 95.5 %.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.305-306
• /
• 2005

The effects of As addition In amorphous selenium (a-Se) films for digital X-ray conversion material have been studied using the moving photocarrier grating (MPG) technique We have found an increase in hole drift mobility and recombination lifetime, especially when 0.3% As is added into a-Se film, whereas electron mobility decreases with As addition due to the defect density. The transport properties for As doped a-Se films obtained by using MPG technique have been compared with X-ray sensitivity for a-Se:As X-ray device. The fabricated a-Se (0.3%As) based X-ray detector exhibited the highest X-ray sensitivity of 5 samples.

• 디지털산업정보학회논문지
• /
• 제7권2호
• /
• pp.59-65
• /
• 2011

All-optical signal processing is expected to offer advantages in speed and power consumption against over electronics signal processing. It has a potential to solve the bottleneck issues of ultra-high speed communication network nodes. All-optical serial-to-parallel and parallel-to-serial data converters would make it possible to easily process the serial data information of a high-speed optical packet without optical-to-electronic-to-optical data conversion. In this paper, we explain the principle of simple and easily expandable all-optical serial-to-parallel and parallel-to-serial data converters based on Mach-Zehnder interferometers. We experimentally demonstrate these data converters at 10Gbit/s serial data rate. They are useful all-optical devices for the all-optical implementations of label decoding, self-routing, control of variable packets, bit-wise logical operation, and data format conversion.