• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.4
• /
• pp.414-420
• /
• 2018

The digital convergence looking for new ways to engage visitors by superimposing virtual content on projection over the real world captured media contents. This paper propose the Light ID based interactive 3D immersive exhibition things view using HMD AR technology. This approach does not required to add any additional infrastructure to be built-in to enable service and uses the installed Lighting or displays devices in the exhibit area. In this approach, the Light ID can be used as a Location Identifier and communication medium to access the content unlike the QR Tag which supports provide the download information through web interface. This utilize the advantages of camera based optical wireless communication (OWC) to receive the media content on smart device to deliver immersive 3D content visualization using AR. The proposed exhibition method is emulated on GALAXY S8 smart phone and the visual performance is evaluated for Jeonju Hanok Village. The experimental results shows that the proposed method can give immersive 3D view for exhibit things in real-time.

• Korean Chemical Engineering Research
• /
• v.49 no.1
• /
• pp.41-46
• /
• 2011

We investigated experimentally the properties of dust explosion through lycopodium particle clouds in a duct to provide the fundamental knowledge. Propagating dust flames in the vertical duct of 120 cm height and 12 cm square cross-section were observed by digital video camera and flame front is visualized using by PIV(Particle Image Velocimetry) system. As the result, when the same average dust concentration existed in the vertical duct, downward flame propagation was faster than the upward flame propagation, its rate increased with dust concentration in 300g/$m^3$. Post flames were caused by the ignition of unburned particles which flowed into the rear region of flame from passage between flame and duct wall, and they generated regardless of duct condition. Also, it was found that appearance frequency of post flames during dust flame propagations increased with the increase of dust concentration.

• Archives of design research
• /
• v.14 no.1
• /
• pp.63-70
• /
• 2001

Thanks to the inter-connection of information servers throughout the world based on the internet technology, the new sphere which actual transaction can be made like in the visible market has become conspicuous as the virtual space. The movement to realize the new business through the cyber space has been actively ongoing. In the domestic market, a lot of corporations knowing the needs of internet shopping malls have entered into this e-business but they have not made a big success comparing with internet's potentials. And, it can be attributed to the simple planes and the limitations of information provided by the cyber malls, which means that the needs of better information transfer we apparent Accordingly, in this thesis, the research on the 3-D based products and shopping malls has been made through the inter-complementary composition between the 2-D shopping malls and 3-B ones. This research consists of 3 parts. Firstly, through the research on references and existing data, it presents the analysis on consumer's characteristics and sales limits of the internet shopping mall's products. Secondly, the background of 3-D shopping mall's advent and the virtual reality technology data are put together. Finally, it presents how the development of 3-D based product modeling and shopping malls can increase the consumer's purchase power and furthermore the directions of shopping malls to go.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.357-360
• /
• 1997

For medical students and doctors, knowledge of the 3-dimensional (3D) structure of the heart is very important in diagnosis and treatment of the heart diseases. 2-dimensional (2D) tools (e.g. anatomy book) or classical 3D tools (e.g. plastic model) are not sufficient or understanding the complex structures of the heart. Moreover, it is not always guaranteed to dissect the heart of cadaver when it is necessary. To overcome this problem, virtual dissection systems of the heart have been developed. But these systems are not satisfactory since they are made of radiographs; they are not true 3D images; they can not be used to dissect freely; or they can only be operated on the workstation. It is also necessary to make the dissection systems incorporating the various races and tribes because of the organ's difference according to race and tribe. This study was intended to make the 3D image of the heart from a Korean cadaver, and to establish a virtual dissection system of the heart with a personal computer. The procedures or manufacturing this system were as follows. 1. The heart from a Korean adult cadaver was embedded with gelatin solution, and serially cross-sectioned at 1mm-thickness on a meat slicer. Pictures or 153 cross-sectioned specimens were inputted into the computer using a digital camera ($756{\times}504$ resolution, true color). 2. The alignment system was established by means of the language of IDL, and applied to align 2D images of the heart. In each of 2D images, closed curves lining clean and dirty blood pathways were drawn manually on the CorelDRAW program. 3. Using the language of IDL, the 3D image and the virtual dissection system of the heart were constructed. The virtual dissection system of the heart allowed or ree rotation, any-directional sectioning, and selected visualization of the heart's structure. This system is expected to become more advanced, and to be used widely through Internet or CD-title as an educational tool for medical students and doctors.

• Journal of Fashion Business
• /
• v.12 no.2
• /
• pp.59-71
• /
• 2008

The purpose of this thesis is to analyse the style, color, and items of '06-07 F/W women's street fashion in Dalian. The cultural, racial and geographical uniqueness, asks for the analysis, based on the individual local area on the part of Korean fashion company desiring to launch into China fashion market. I would contribute to the understanding the preference of fashion in northeastern area, thereby, affording a fundamental resources for designing strategies for Korean fashion brands in China. The period of investigation is about 15 weeks from 23 Sep. 2006 until 6 Jan. 2007, with combined use of camcorder and digital camera. The site was Victory Shopping Plaza, in center of City, also with Mycal, Ansung, Dasang department store situated in the Economic Development Zone. Finally, 900 photos were selected for analysing. The result of this study are as follows: 1. Preferred clothing styles are jean casual 45.4%(409), sports casual 16.3%(147), character casual 8%(72), feminine 20.6%(185), Classic 9.7%(87). Compare to the former study about Spring, Sports casual showed dominant rate about 36.0% in casual style. In Winter, however, the preference were changed from sport casual to jean casual. 2. Preferred clothing items are parka/padding coat 32.3%(291), jumper 31%(279), T-shirts 16%(144) and jacket 7.5%(67) for tops, pants 91.8%(826) and skirts 8.2%(74) for bottoms. In the pants, straight pants 78.4%(648), bell bottom pants 10.9%(90), capri pants 7.4%(61), cargo pants 2.9%(24), bermuda pants 0.4%(3) were listed respectively. In the skirts, A-line skirt 51.3%(38), pleats skirt 25.7%(19), flare skirt 12.2%(9), semi-tight skirt 8.1%(6), tight skirt 2.7%(2) were listed. Finally the skirt length midi 75.7%(56), mini 18.9%(14) and maxi 5.4%(4) were listed. 3. Preferred colors are red 21.8%(196), white 21.6%(194), black 16.4%(148), yellow 10.0%(90), beige 9.3%(84), green 7.9(71) and blue 6.3%(57) for tops, and black 40.8%(367), blue 37.7%(339), gray 4.6%(41), white 4.3%(39) etc. for bottoms.

• Korean Journal of Remote Sensing
• /
• v.35 no.6_1
• /
• pp.895-905
• /
• 2019

Commercial Unmanned Aerial Vehicle (UAV) image processing software products currently used in the industry provides camera calibration information and block bundle adjustment accuracy. However, they provide mapping accuracy achievable out of input UAV images. In this paper, the quality of mapping is calculated by using orientation parameters from UAV image processing software. We apply the orientation parameters to the digital photogrammetric workstation (DPW) for verifying the reliability of the mapping quality calculated. The quality of mapping accuracy was defined as three types of accuracy: Y-parallax, relative model and absolute model accuracy. The Y-parallax is an accuracy capable of determining stereo viewing between stereo pairs. The Relative model accuracy is the relative bundle adjustment accuracy between stereo pairs on the model coordinates system. The absolute model accuracy is the bundle adjustment accuracy on the absolute coordinate system. For the experimental data, we used 723 images of GSD 5 cm obtained from the rotary wing UAV over an urban area and analyzed the accuracy of mapping quality. The quality of the relative model accuracy predicted by the proposed technique and the maximum error observed from the DPW showed precise results with less than 0.11 m. Similarly, the maximum error of the absolute model accuracy predicted by the proposed technique was less than 0.16 m.

• Korean Journal of Remote Sensing
• /
• v.31 no.5
• /
• pp.461-471
• /
• 2015

In this study, we generated orthoimages and Digital Elevation Model (DEM) from Unmanned Aerial Vehicle (UAV) to confirm the accuracy of possibility of geospatial information system generation, then compared the DEM with the topographic height values measured from Real Time Kinematic-GPS (RTK-GPS). The DEMs were generated from aerial triangulation method using fixed-wing UAV and rotary-wing UAV, and DEM based on the waterline method also generated. For the accurate generation of mosaic images and DEM, the distorted images occurred by interior and exterior orientation were corrected using camera calibration. In addition, we set up the 30 Ground Control Points (GPCs) in order to correct of the UAVs position error. Therefore, the mosaic images and DEM were obtained with geometric error less than 30 cm. The height of generated DEMs by UAVs were compared with the levelled elevation by RTK-GPS. The value of R-square is closely 1. From this study, we could confirm that accurate DEM of the tidal flat can be generated using UAVs and these detailed spatial information about tidal flat will be widely used for tidal flat management.

• Korean Journal of Remote Sensing
• /
• v.34 no.2_2
• /
• pp.407-418
• /
• 2018

The frequency and risk of disasters are increasing due to environmental and social factors. In order to respond effectively to disasters that occur unexpectedly, it is very important to quickly obtain up-to-date information about target area. It is possible to intuitively judge the situation about the area through the image-map generated at high speed, so that it can cope with disaster quickly and effectively. In this study, we propose an image-map generation and visualization system from UAV images for real-time disaster monitoring. The proposed system consists of aerial segment and ground segment. In the aerial segment, the UAV system acquires the sensory data from digital camera and GPS/IMU sensor. Communication module transmits it to the ground server in real time. In the ground segment, the transmitted sensor data are processed to generate image-maps and the image-maps are visualized on the geo-portal. We conducted experiment to check the accuracy of the image-map using the system. Check points were obtained through ground survey in the data acquisition area. When calculating the difference between adjacent image maps, the relative accuracy was 1.58 m. We confirmed the absolute accuracy of the image map for the position measured from the individual image map. It is confirmed that the map is matched to the existing map with an absolute accuracy of 0.75 m. We confirmed the processing time of each step until the visualization of the image-map. When the image-map was generated with GSD 10 cm, it took 1.67 seconds to visualize. It is expected that the proposed system can be applied to real - time monitoring for disaster response.

• Journal of Korea Water Resources Association
• /
• v.43 no.2
• /
• pp.153-165
• /
• 2010

Large-Scale Particle Image Velocimetry (LSPIV) is an extension of particle image velocimetry (PIV) for measurement of flows spanning large areas in laboratory or field conditions. LSPIV is composed of six elements - seeding, illumination, recording, image transformation, image processing, postprocessing - based on PIV. Possible error elements at each step of Mobile LSPIV (MLSPIV), which is a mobile version of LSPIV, in field applications are identified and summarized the effect of the errors which were quantified in the previous studies. The total number of elemental errors is 27, and five error sources were evaluated previously, seven elemental errors are not effective to the current MLSPIV system. Among 15 elemental errors, four errors - sampling time, image resolution, tracer, and wind - are investigated through an experiment at a laboratory to figure out how those errors affect to velocity calculation. The analysis to figure out the effect of the number of images used for image processing on the velocity calculation error shows that if over 50 images or more are used, the error due to it goes below 1 %. The effect of the image resolution on velocity calculation was investigated through various image resolution using digital camera. Low resolution image set made 3 % of velocity calculation error comparing with high resolution image set as a reference. For the effect of tracers and wind, the wind effect on tracer is decreasing remarkably with increasing the flume bulk velocity. To minimize the velocity evaluation error due to wind, tracers with high specific gravity is favorable.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.11
• /
• pp.1554-1564
• /
• 2007

In apparel industry, the production of clothing for the global market, has it#s origin in its characteristics depending on hands on working style, according to the globalization of a fashion industry. These days, however, the globalized production is unable to keep pace with the short cycle of production due to the unpredictable change of the taste or demands in the local area, as a result, the industry has come to take a focus on the production and consumption in the circumscribed region. In this stream, the northeastern area, specially, Dalian which is renowned for a center of fashion was designated as a city of this study as a representative. The cultural, racial and geographical uniqueness, asks for the analysis, based on the individual local area on the part of Korean fashion company desiring to launch into China fashion market. The purpose of this thesis is to analyse the style, color, and items of street fashion in Dalian. I would contribute to the understanding the preference of fashion in northeastern area, thereby, affording a fundamental resources for designing strategies for Korean fashion brands in China. The period of investigation is about 5 weeks from 14 May 2006 until 18 June 2006, with combined use of camcorder and digital camera. The site was Victory Shopping Plaza, in center of city, also with Mycal, Ansung, Dasang department store situated in the Economic Development area. The result of this study are as follows: 1. Preferred clothing styles are casual styles(68%) rather than formal styles(32%). In the casual styles, sports casual(36.0%), character casual(29.5%), jean casual(2.6%) were listed. All kinds of clothes are tightly fitted due to the stretched fabric and knit fabric. 2. Preferred colors are white(31.1%), red(16.6%), black(15.8%) khaki(7.8%) and blue(7.6%) for tops, and black(34.6%), blue(27.2%), white(15.4%), brown(14.6%) for bottoms. 3. Preferred clothing items are T-shirt(36.5%), jumper(33.6%), jacket(20.0%), blouse(8.7%), etc.(1.2%) for tops, pants(91.4%), skirts(8.6%) for bottoms. In the pants, cigarette pants(34.6%), bell bottom pants(21.0%), cargo pants(19.9%), straight pants(15.9%) were listed respectively. In the skirts, flare skirt(3.9%), tight skirt(2.2%), semi tight skirt(1.7%), pleats skirt(0.8%) were listed.