• Ocean and Polar Research
• /
• v.35 no.1
• /
• pp.1-14
• /
• 2013

Shoreline data of the barrier islands in Nakdong River Estuary for the last three decades were assembled using six sets of aerial photographs and seven sets of satellite images. Canny Algorithm was applied to untreated data in order to obtain a wet-dry boundary as a proxy shoreline. Digital Shoreline Analysis System (DSAS 4.0) was used to estimate the rate of shoreline changes in terms of five statistical variables; SCE (Shoreline Change Envelope), NSM (Net Shoreline Movement), EPR(End Point Rate), LRR (Linear Regression Rate), and LMS (Least Median of Squares). The shoreline in Jinwoodo varied differently from one place to another during the last three decades; the west tail has advanced (i.e., seaward or southward), the west part has regressed, the south part has advanced, and the east part has regressed. After the 2000s, the rate of shoreline changes (-2.5~6.7 m/yr) increased and the east advanced. The shoreline in Shinjado shows a counterclockwise movement; the west part has advanced, but the east part has retreated. Since Shinjado was built in its present form, the west part became stable, but the east part has regressed faster. The rate of shoreline changes (-16.0~12.0 m/yr) in Shinjado is greater than that of Jinwoodo. The shoreline in Doyodeung has advanced at a rate of 31.5 m/yr. Since Doyodeung was built in its present form, the south part has regressed at the rate of -18.2 m/yr, but the east and west parts have advanced at the rate of 13.5~14.3 m/yr. Based on Digital Shoreline Analysis, shoreline changes in the barrier islands in the Nakdong River Estuary have varied both temporally and spatially, although the exact reason for the shoreline changes requires more investigation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.3
• /
• pp.187-193
• /
• 2022

In the Yeongdong region of Gangwon-do, coastal areas are important resources in terms of cultural, social and economic aspects. However, the coast of Gangwon-do is experiencing severe erosion, and it is concerned that its adverse effects will gradually increase. In this study, coastline changes of Yangyang and Gangneung in Gangwon-do were tracked and analyzed over a long period of time. In order to build time series image data, aerial photos from the 1940s to the present were mainly used, and data from CORONA satellite, which operated from the 1960s to the early 1970s, were collected and used together. Using 51cm resolution ortho image and 2m resolution Digital Elevation Model(DEM) as reference, ground control points were selected to perform geometric correction on the aerial photos and CORONA images. Subsequently, Canny edge detector applied to these images to extract the coastlines. As a result of analyzing the extracted and vectorized coastlines by overlaying them in chronological order, erosion and deposition occurring around the artificial structures and on the nearby beaches were observed. In this study, the effect of seasonal variation, tide, and various coastal management including the beach filling were not considered. Because coastal erosion is greatly affected by geographic factors, each local government must find its own solution. Continuous research and local data accumulation are required.

• Journal of the Society of Disaster Information
• /
• v.14 no.4
• /
• pp.501-509
• /
• 2018

Purpose: UAV-based photo measurements are being researched using UAVs in the space information field as they are not only cost-effective compared to conventional aerial imaging but also easy to obtain high-resolution data on desired time and location. In this study, the UAV-based high-resolution images were used to perform the land cover classification. Method: RGB cameras were used to obtain high-resolution images, and in addition, multi-distribution cameras were used to photograph the same regions in order to accurately classify the feeding areas. Finally, Land cover classification was carried out for a total of seven classes using created ortho image by RGB and multispectral camera, DSM(Digital Surface Model), NDVI(Normalized Difference Vegetation Index), GLCM(Gray-Level Co-occurrence Matrix) using RF (Random Forest), a representative supervisory classification system. Results: To assess the accuracy of the classification, an accuracy assessment based on the error matrix was conducted, and the accuracy assessment results were verified that the proposed method could effectively classify classes in the region by comparing with the supervisory results using RGB images only. Conclusion: In case of adding orthoimage, multispectral image, NDVI and GLCM proposed in this study, accuracy was higher than that of conventional orthoimage. Future research will attempt to improve classification accuracy through the development of additional input data.

• Spatial Information Research
• /
• v.13 no.3 s.34
• /
• pp.195-209
• /
• 2005

Forest road has been an essential infrastructure for various forestry practices as well as for recreational use, disaster management, and local economics promotion. Since 1980s, extensive network of forest roads has been constructed as an national project in Korea. However, due to the minimal-budget of the project, accurate maps of forest road are not usually available. Although forest road map is a main thematic layer for the forest Geographic Information System (FGIS), its locational accuracy has not been sufficient for the practical applications and, therefore, the update of digital forest road maps is urgent. The objectives of this study is to compare ae methodology of generating and updating digital forest road maps from the aspects of the map accuracy and the efficiency of methods. Four mapping methods (GPS surveying, satellite imagery, ortho aerial photograph, and digital photogrammetry) were applied to generate the forest road maps over the study area of Mt. Oseo in Chungchungnam-do, which has a 35km forest roads distributed in national, public and private forests. The forest road Imp produced by digital photogrammetric method is the most accurate and comparable to GPS surveying although it required the greatest amount of labor time.

• Journal of the Korean Geophysical Society
• /
• v.9 no.4
• /
• pp.387-395
• /
• 2006

Nowadays, various digital maps on a reduced scale were drawn in Korea including the topographic series of a nation. Though these digital maps are drawn and revised by using aerial photograph or satellite image, there are some problems that it is difficult to revise or renew the topography and natural feature immediately which changes frequently. As the countermeasures of these problems we use GPS accumbency method, which provides user with convenience and accumbency accuracy which is required to revise and renew digital maps. But acquiring correct position by using GPS only may cause not a few errors because of environmental effect of satellite signal errors that GPS obtains. Although accumulated errors which is the major problem of existing method was diminished owing to the position signal received from satellite which is about 20,183km above, the area that can not receives the signal is occur such as woods and high-rise buildings space. And because of the GDOP (Geometry Dilution of Precision) of GPS satellite and the periodically changing orbit of the satellite, the position calculating problems occur. For settlement of these problems and accurate position determination, DGPS (Differential GPS) is indispensably needed. So, in this study, by adapting Radio Beacon Receiver for marine position determination which is the most convenience method of DGPS methods, we elevated accuracy of modification and renewal of digital map and, having wide application in various measurements, proposed the rapid measurement method about widespread area. In this study, wewant to propose the work scheme of rapid modification and renewal of digital map by using Beacon GPS which is comparatively cheap of all the DGPS methods and which makes it possible to measure independently.

• Journal of Environmental Impact Assessment
• /
• v.8 no.3
• /
• pp.61-76
• /
• 1999

For the effective management of urban forest, a variety of informations on urban forest needs to be accurately measured and effectively used in decision-making processes. This study aims at developing an urban forest management system with reference to GIS and making it possible to effectively manage urban forests. A detailed forest type map were constructed with the help of aerial photograph and terrestrial inventory. A geographical map in terms of slope, aspect and altitude were also prepared by Digital Elevation Model(DEM). A soil type map containing chemical characteristics were also made through soil analysis. These thematic maps which contain informations on forest type, geography and soil were digitalized with reference to GIS, and an urban forest management system of user interface were developed. With the help of this urban forest management system, various spatial and attribute informations which need for urban forest management could be easily used in decision-making processes in relation to urban forest.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.4
• /
• pp.17-24
• /
• 2015

This study utilized high quality three-dimensional geospatial information produced by high-resolution Digital Aerial Photograph and Airborne LiDAR data in order to analyse landslides and debris flows induced by the heavy rainfall in Chuncheon area. Also, this study analysed correlation between the established landslide hazard map and the landslide factor effect and reviewed the analysis result of debris flows on the area where landslides with debris flows occurred frequently. Finally;the study proposed ways to renew the established landslide hazard map effectively and utilize the high quality three-dimensional Geospatial information on the landslide risk area.

• Journal of Korean Society of Forest Science
• /
• v.95 no.3
• /
• pp.240-249
• /
• 2006

Recently, dispersion of damaged forest by pine wilt disease has been regarded as a serious social issue. Damages by pine wilt disease have been spreaded by natural area expansion of the vectors in the damaged area, while the national wide damage spread has induced by human-involved carrying infected trees out of damaged area. In this study, damaged trees were detected and located on the digital map by aerial photograph and terrestrial surveys. The spatial distribution pattern of damaged trees, and the relationship of spatial distribution of damaged trees and some geomorphological factors were geostatistically analysed. Finally, we maked natural spread pattern map of pine wilt disease using geostatistical CART(Classification and Regression Trees) model. This study verified that geostatistical analysis and CART model are useful tools for understanding spatial distribution and natural spread pattern of pine wilt diseases.

• Economic and Environmental Geology
• /
• v.48 no.3
• /
• pp.205-212
• /
• 2015

We have verified applicability of UAV(Unmanned Aerial Vehicle) photogrammetry to a mining engineering. The test mine is a smectite mine located at Gyeongju city in Gyeongnam province, Koera. 448 photos over area of $600m{\times}380m$ were taken with overlapped manner using Cannon Mark VI equipped to multicopter DJI S1000, which were processed with AgiSoft Photoscan software to generate orthophoto and DEM model of the study area. photogrammetry data with 10 cm resolution were generated using 6 ground control positions, which were exported to the 3D geological modeling software to make a topographic surface object. Monitoring of amount of ore production and landsliding could be done with less than 1 hours photographing as well as low cost. A direct link between UAV photogrammetry and 3D geological modeling technology might increase productivity of a mine due to appling the topographical surface change immediately according to the mining operation.

• Journal of Korea Water Resources Association
• /
• v.52 no.8
• /
• pp.515-529
• /
• 2019

Geospatial information for river network and watershed boundary have played a fundamental roles in terms of river management, planning and design, hydrological and hydraulic analysis. Irrespective of their importance, the lack of punctual update and improper maintenance in currently available river-related geospatial information systems has revealed inconsistency issues between individual systems and spatial inaccuracy with regard to reflecting dynamically transferring riverine geography. Given that digital elevation models (DEMs) of high spatial resolution enabling to reproduce precise river network are only available adjacent to national rivers, DEMs with poor spatial resolution lead to generate unreliable river network information and thereby reduce their extensible applicabilities. This study first of all evaluated published spatial information available in Korea with respect to their spatial accuracy and consistency, and also provides a methodology and tool to modify existing low resolution of DEMs by means of striation of conventional or digitized river network to replicate input river network in various degree of further delineation. The tool named FSND was designed to be operated in ArcGIS ModelBuilder which ensures to automatically simulate river network striation to DEMs and delineation with different flow accumulation threshold. The FNSD was successfully validated in Seom River basin to identify its replication of given river network manually digitized based on recent aerial photograph in conjunction with a DEM with 30 meter spatial resolution. With the derived accuracy of reproducibility, substantiation of a various order of river network and watershed boundary from the striated DEM posed tangible possibility for highly extending DEMs with low resolution to be capable of producing reliable riverine spatial information subsequently.