• 한국재료학회지
• /
• 제12권9호
• /
• pp.696-700
• /
• 2002

The Ti-aluminide intermetallic compound was formed from high purity elemental Ti and Al foils by self-propagating, high-temperature synthesis(SHS) in hot press. formation of $TiAl_3$ at the interface between Ti and Al foils was controlled by temperature, pressure, heating rate, and so on. According to the thermal analysis, it is known in this study that the heating rate is the most important factor to form the intermetallic compound by this SHS reaction. The V layer addition between Al and Ti foils increased SHS reaction temperatures. The fully dense, well-boned inter-metallic composite($TiA1/Ti_3$Al) sheets of 700 m thickness were formed by heat treatment at $1000^{\circ}C$ for 10 hours after the SHS reaction of alternatively layered 10 Ti and 9 Al foils with the V coating layer. The phases and microstructures of intermetallic composite sheets were confirmed by EPMA and XRD.

• Bulletin of the Korean Chemical Society
• /
• 제10권3호
• /
• pp.258-261
• /
• 1989

The electrochemical behaviors of 4-(2)-thiazolylazo)-resorcinol (TAR) in acetonitrile solution was studied by DC polarography, cyclic voltammetry, controlled-potential coulometry and UV-Vis spectroscopy. The electrochemical reduction of TAR occurs in four-one electron reduction steps in acetonitrile solution. The products of the first and the third electron transfer are speculated to be a relatively stable anion radical. The second electron transfer to the dianion is followed by a chemical reaction producing a protonated species. The product of the fourth electron transfer also produces the corresponding amine compounds with a following reaction. Also every reduction wave was diffusion controlled. The first reduction wave is considerably reversible and the other waves are less reversible.

• 한국세라믹학회지
• /
• 제36권6호
• /
• pp.655-661
• /
• 1999

${\beta}$-SiC formation mechanism in Si melt-C-SiC system with varying in size of carbon source was investigated. A continuous reaction sintering process using Si melt infiltration method was adopted to control the reaction sintering time effectively. It was found that ${\beta}$-SiC formation mechanism in Si melt-C-SiC system was directly affected by the size of carbon source. In the Si melt-C-SiC system with large carbon source ${\beta}$-SiC formation mechanism could be divided into two stages depending on the reaction sintering time: in early stage of reaction sintering carbon dissolution in Si melt and precipitation of ${\beta}$-SiC was occurred preferentially and then SIC nucleation and growth was controlled by diffusion of carbon throughy the ${\beta}$-SiC layer formed on graphite particle. Furthmore a dissolution rate of graphite particles in Si melt could be accelerated by the infiltration of Si melt through basal plane of graphite crystalline.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제10권S_4호
• /
• pp.173-179
• /
• 2001

The chemical behavior and properties of the redox state of environmental pollutants was investigated using electrochemical methods. The purpose was to measure the variations in the redox reaction of differential pulse polarograms and cyclic voltammograms. The results observed the influences on redox potential and current of various factors including concentration, temperature, salt, and pH. These were established factors as the effect of the redox reaction. It can be clearly recognized that the electrode reaction are from reversible to irreversible processes. Also, it was mixing with reaction current controlled.

• 한국환경과학회지
• /
• 제11권2호
• /
• pp.131-137
• /
• 2002

The chemical behavior and properties on the redox state of environmental pollutant has been investigated by electrochemical methods. We carried out to measure the variations in the redox reaction of differential pulse polarogram and cyclic voltammogram. The results observed the influences on redox potential and current of various factors with temperature and pH. These were established factors as the effect of the redox reaction. It can be clearly recognized that the electrode reaction are from qusi-reversible to irreversible processes. Also, it was mixing with reaction current controlled. The bits-phenol A in the waste water was made to compound with cobalt ion and it take away from the separation into compound. The $Co(BPA)_2$ compound was not found to be dissociation in waste water. However, this compound is avery unstable(K=1.02) and for a while, it was to be a dissociation. Therefore, we believed that it was likely to a toxic substance.

• 대한화학회지
• /
• 제6권2호
• /
• pp.108-112
• /
• 1962

Lead ion gives a well-defined wave with $E_{1/2}$=-0.57V(vs. S.C.E.) from a base electrolyte consisting of 0.1M TEA=0.5M$KNO_3$=0.0002% methl red. (pH 9.8).The reduction wave of lead is lead(II) to lead(0) and electrode reaction of this wave diffusion controlled.Its diffusion current constant is 2.45 and temperature coefficient of this wave is about 1.2%.Under above conditions, diffusion current is proportional to the concentration of lead in the range of $10^{-3}$ ~$10^{-4}$ M.

• 멤브레인
• /
• 제9권4호
• /
• pp.240-244
• /
• 1999

글루코우즈 용액의 농도를 측정하기 위해 다층 젤라틴 필름으로 형성된 진단막을 제조하였다 글루코우즈의 최대 확산속도가 글루코우즈의 농도가 증가함에 따라 직선적으로 증가함으로 알 수 있었다. 혈액속에 존재할 가능성이 있는 화합물을 글루코우즈와 환원효소들의 반응에 미치는 영향을 조사하였다 그 결과 대부분의 화합물들이 글루코유즈의 최대확산속도에 큰 영향을 미치지 않는 것을 알 수 있었다.

• 한국결정성장학회지
• /
• 제5권2호
• /
• pp.122-128
• /
• 1995

알루미나 입자표면에 실리카 흡착층을 갖는 복합분말로 제조된 시편을 반응소결시켜 물라이트화 과정을 고찰하였다. 물라이트화 반응은 알루미나와 cristobalite의 계면에서 낮은 알루미나 함량을 갖는 비정질 aluminosilicated 상이 중간층을 형성하면서 시작되고 이 층을 통한 알루미나의 확산에 의하여 물라이트가 성장되었다. 물라이트는 알루미나의 입자의 표면을 따라 성장하였으며 확산에 의해 성장속도가 제어되었다

• 한국식품영양학회지
• /
• 제13권4호
• /
• pp.360-364
• /
• 2000

유지에 존재하는 linoleic acid의 전기화학적 산화/환원으로부터 속도론적 인자를 예측하고, 시간 변화에 대한 산패 정도를 조사하였다. Linoleic acid의 전기 화학적 산화환원 반응은 비가역적이고, 확산지배적으로 진행됨을 알 수 있고, 주사속도에 따른 결과로부터 확산계수 $D_{o}$ 는 2.61$\times$$10^{-6}$이고, 속도상수 $K^{o}$ 는 9.79$\times$$10^{-11}$로 주어짐을 예측하였다. 또한 linoleic acid의 산화반응 영역과 환원반응 영역에서 작업전극의 선택도가 달라짐을 볼 수 있다. 대기중 방치시간에 따른 시험 결과 방치한 지 4일을 전후로 산화 peak가 최대값으로 주어졌다. 특정 Peak에서 일정전위 전기분해 한 후 전기분해 생성물을 분석한 결과 carbonyl group이 생성됨을 예측할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제33권12호
• /
• pp.4035-4040
• /
• 2012

Presented study describes the synthesis of photo cross-linkable and water soluble hydroxyethyl starch hydroxyethyl methacrylate (HESHEMA) samples with different degree of substitution (DS) by functionalization of hydroxyethyl starch (HES) with hydroxyethyl methacrylate (HEMA) or hydroxyethyl methacrylate carbonylimidazole (HEMACI) in DMSO using two different routes. It was revealed that the reaction time for HESHEMA synthesis can be reduced from 5 days to 24 h by conducting the reaction at $80^{\circ}C$ instead of at room temperature. Solubility of HESHEMA was found to be dependent on DS which in turn was dependent on ratio between HES and HEMA or HEMACI. HESHEMA samples with DS > 0.24 depicted insoluble in water, whereas the samples with DS < 0.05 did not form appreciable gel. HESHEMA samples with appropriate DS were converted into hydrogels by cross-linking polymer chains under UV radiations and resulting HESHEMA hydrogels showed swelling up to 1200%. Application of HESHEMA in controlled drug delivery was investigated by diffusion based encapsulation of Ondansetron, a serotonin 5-$HT_3$ receptor antagonist drug, mainly used for nausea and vomiting treatment.