• 한국결정성장학회지
• /
• 제14권5호
• /
• pp.226-232
• /
• 2004

One predicts the crystal growth rate of ZnSe with a low vapor pressure system in a horizontal configuration based on one dimensional advection-diffusion and two-dimensional diffusion-convection model. The present results show that for the ratios of partial pressures, s = 0.2 and 2.9, the growth rate increases with the temperature differences between the source and crystal. As the ratio of partial pressure approaches the stoichiometric value, s = 2 from s = 1.5 (zinc-deficient case: s < 2) and 2.9 (zinc-rich case: s > 2), the rate increases sharply. For the ranges from 1.5 to 1.999 (zinc-deficient case: s < 2) and from s = 9 to 2.9 (zinc-rich case: s > 2), the rate are slightly varied. From the viewpoint of the order of magnitude, the one-dimensional model for low vapor pressure system falls within the 2D predictions, which indicates the flow fields would be advective-diffusive. For the effects of gravitational accelerations on the rate, the gravitational constants are varied from 1 g to $10^{-6}$ g for $\Delta$T = 50 K and s = 1.5, the rates remain nearly constant, i.e., 211 mg/hr, which indicates Stefan flow is dominant over convection.

• 대한기계학회논문집B
• /
• 제26권8호
• /
• pp.1062-1068
• /
• 2002

In our previous study, it was proven that the mean size and the total number concentration of carbon soot particles emitted from a $C_2$H$_4$ normal diffusion flame decreased when a DC corona was discharged to pin-pin electrodes. In this work the effect of AC corona discharge on soot emission was investigated and compared with that of DC corona discharge. For the pin-pin electrodes the size of soot particles and the number concentration decreased by the AC voltage. There were only slight changes in size distribution with frequencies, while the magnitude of applied voltage was constant. When the electric field was applied to plate-plate electrodes, the size and the number concentration also decreased with the applied AC voltages. For applied voltages above 2kV the effect of frequency increase on the soot emission was effective.

• Journal of Microbiology and Biotechnology
• /
• 제21권12호
• /
• pp.1257-1263
• /
• 2011

This paper is dedicated to the study on the external and internal mass transfers of glucose for succinic acid fermentation under substrate and product inhibitions using a bioreactor with stirred bed of immobilized Actinobacillus succinogenes cells. By means of the substrate mass balance for a single particle of biocatalysts, considering the kinetic model adapted for both inhibitory effects, specific mathematical models were developed for describing the profiles of the substrate concentration in the outer and inner regions of biocatalysts and for estimating the substrate mass flows in the liquid boundary layer surrounding the particle and inside the particle. The values of the mass flows were significantly influenced by the internal diffusion velocity and rate of the biochemical reaction of substrate consumption. These cumulated influences led to the appearance of a biological inactive region near the particle center, its magnitude varying from 0 to 5.3% of the overall volume of particles.

• Bulletin of the Korean Chemical Society
• /
• 제13권3호
• /
• pp.296-306
• /
• 1992

$^{13}C$ spin-lattice relaxation times were measured for n-alkanes of moderate chain length, ranging from n-octane to n-dodecane, under the condition of proton broad-band decoupling within the temperature range of 248-318 K in order to gain some insight into basic features of segmental motions occurring in long chain ploymeric molecules. The NOE data showed that except for methyl carbon-13 dipole-dipole interactions between $^{13}C$ and directly bonded $^1H$ provide the major relaxation pathway, and we have analyzed the observed $T_1data$ on the basis of the internal rotational diffusion theory by Wallach and the conformational jump theory by London and Avitabile. The results show that the internal rotational diffusion constants about C-C bonds in the alkane backbone are all within the range of $10^9\;-10^10\;sec^{-1}$ in magnitude while the mean lifetimes for rotational isomers are all of the order of $10^{-11}\;-10^{-10}$ sec. Analysis by the L-A theory predicts that activation energies for conformational interconversion between gauche and trans form gradually increase as we move from the chain end toward the central C-C bond and they are within the range of 2-4 kcal/mol for all the compounds investigated.

• 한국추진공학회지
• /
• 제17권6호
• /
• pp.59-66
• /
• 2013

액체질소와 기체아르곤을 이용해 단일 제트와 동축 제트의 아임계 및 초임계 분무 특성을 관찰하였다. 분무의 가시화에는 shadowgraph 기법이 사용되었으며, 실험결과 분석을 위해 밀도구배강도 이미지가 사용되었다. 아임계 조건에서는 단일제트에 비해 동축제트가 제트 계면의 굴곡이 더 심해짐을 알 수 있었다. 초임계 조건에서는 동축제트의 초임계 질소가 단일제트에 비해 빠르게 확산되는 것을 확인하였다. 평균 이미지에서 제트 축방향 거리에 따른 제트 직경을 도출하였으며 초임계 조건에서는 동축 분무의 제트 직경이 더 빠르게 감소하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권4호
• /
• pp.2124-2148
• /
• 2017

Accurate facial expression recognition (FER) requires reliable signal filtering and the effective feature extraction. Considering these requirements, this paper presents a novel approach for FER which is robust to noise. The main contributions of this work are: First, to preserve texture details in facial expression images and remove image noise, we improved the anisotropic diffusion filter by adjusting the diffusion coefficient according to two factors, namely, the gray value difference between the object and the background and the gradient magnitude of object. The improved filter can effectively distinguish facial muscle deformation and facial noise in face images. Second, to further improve robustness, we propose a new feature descriptor based on a combination of the Histogram of Oriented Gradients with the Canny operator (Canny-HOG) which can represent the precise deformation of eyes, eyebrows and lips for FER. Third, Canny-HOG's block and cell sizes are adjusted to reduce feature dimensionality and make the classifier less prone to overfitting. Our method was tested on images from the JAFFE and CK databases. Experimental results in L-O-Sam-O and L-O-Sub-O modes demonstrated the effectiveness of the proposed method. Meanwhile, the recognition rate of this method is not significantly affected in the presence of Gaussian noise and salt-and-pepper noise conditions.

• 대한전자공학회논문지
• /
• 제22권3호
• /
• pp.95-102
• /
• 1985

반도체 내에서의 불순물 분포를 구하기 위한 2차원 확산문제를 푸는 효과적인 수치 해법을 제시하였다. ADI(Alternating Direction Implicit) 방법과 Gauss 소거법의 조합에 의한 수치해법을 사용하므로써 SOR(Successive Over-Relaxation)이나 stone 방법에 비하여 전산기의 메모리 사용량을 중가시키지 않 고도 거의 모든 확산 조건에 대하여 CP비시간을 1/3 이하로 줄일 수 있었다. 상대오차의 크기를 0.01%이내로 하고 1차원과 2차원 문제에 대하여, 여러가지 수치해법의 CPU를 비교하였다. 1차원 계산결과와 실험결과가 잘 일치하였고, 2차원 계산결과를 1차원 계산결과와 잘 비교한 결과, 일치함을 알 수 있었다.

• Journal of Electrochemical Science and Technology
• /
• 제13권1호
• /
• pp.128-137
• /
• 2022

For this study, the sol gel method was used to synthesize the spinel LiNi_0.5Mn_1.5O₄ (LNMO) electrode material. Structural, morphological, electrochemical, and kinetic aspects of the LNMO have been characterized. The synthesized LNMO was indexed with the Fd3m cubic space group. The excellent capacity retention indicates that the spinel framework of LNMO has the ability to withstand high rate charge-discharge throughout long cycle tests. The Li diffusion coefficient (D_Li) changes non-monotonically across three orders of magnitude, from 10^-9 to 10^-12 cm² s^-1 determined from GITT method. The variation of D_Li seemed to be related to three oxidation reactions that happened throughout the charging process. A small dip in D_Li at the beginning stage of Li deintercalation is correlated with the oxidation of Mn³⁺ to Mn⁴⁺. While two pronounced D_Li minima at 4.7 V and 4.75 V are due to the oxidation of Ni²⁺/Ni³⁺ and Ni³⁺/Ni⁴⁺ respectively. The depletion of D_Li at the high voltage region is attributed to the occurrence of two successive phase transformation phenomena.

• 한국인터넷방송통신학회논문지
• /
• 제23권6호
• /
• pp.47-53
• /
• 2023

본 논문은 밀리미터파(W대역)의 이중편파 신호를 모노펄스 신호로 변환하는 도파관 타입의 급전 구조를 설계하고 제작 방안을 제시하였다. W대역과 같은 높은 주파수 대역에서는 도파관의 크기가 매우 작기 때문에 복잡한 구조의 제작이 매우 어렵다. 따라서 높은 주파수 대역의 도파관 타입 급전 구조는 제작성이 중요하기 때문에 전주도금(Electro Forming) 방식과 확산접합 방식을 본 연구에서 제안하고 검증하였다. 설계된 모노펄스 급전 구조는 90도 하이브리드에 90도 위상 천이기를 결합한 180도 하이브리드 8개와 이중편파 분리를 위한 직교모드변환기(OMT) 4개로 구성된다. 설계된 급전구조는 전주도금(Electro Forming)과 확산접합 제작 방식에 용이하도록 설계하였으며, 제작된 모노펄스 급전구조는 네트워크 분석기를 통해 검증하였다. 제안한 두 가지 제작 방안은 측정된 포트의 신호 크기와 위상을 통해 모노펄스 신호가 잘 생성되는 것을 확인하였다.

• Journal of Mechanical Science and Technology
• /
• 제17권4호
• /
• pp.545-561
• /
• 2003

We use the first-passage-time formulation by Torquato, Kim and Cule ［J. Appl. Phys., Vol. 85, pp. 1560∼1571 (1999) ］, which makes use of the first-passage region in association with the diffusion tracer's Brownian movement, and develop a new efficient Brownian motion simulation method to compute the effective conductivity of digitized composite media. By using the new method, one can remarkably enhance the speed of the Brownian walkers sampling the medium and thus reduce the computation time. In the new method, we specifically choose the first-passage regions such that they coincide with two, four, or eight digitizing units according to the dimensionality of the composite medium and the local configurations around the Brownian walkers. We first obtain explicit solutions for the relevant first-passage-time equations in two-and three-dimensions. We then apply the new method to solve the illustrative benchmark problem of estimating the effective conductivities of the checkerboard-shaped composite media. for both periodic and random configurations. Simulation results show that the new method can reduce the computation time about by an order of magnitude.