• 한국전기전자재료학회논문지
• /
• 제11권8호
• /
• pp.637-645
• /
• 1998

The characteristics of waveguide, electrode and packaging fabricated for acousto-optic tunable filters(AOTF) used for optical communications were analyzed. A $Ti:LiNbO_3$in-diffusing method was employed for the formation of the optical waveguide with a dimension of width $8{\mu}m$, length $30000-50000{\mu}m$ and varying the thickness. The diffusion was carried at $1050^{\circ}C$ for 8 hours to pattern the optical waveguide. The resulted waveguide exhibited a single mode at 1550nm optical wavelength. The width of IDT, with 10 SAM periods, was $5000{\mu}m$ . Impedances of the electrodes deposited with Au were analyzed using a network analyzer; $48.1\Omega$ at the center frequency of 193MHz for electrode thickness of $1500{\AA}$ and $50.7\Omega$ at the center frequency of 192MHz for $1600\AA$. And the characteristics of packaged AOTF was analyzed. When the electrical frequency 177.1MHz was applied to the device, the mode conversion efficiency was measured as 63% at the optical wavelength 1515nm.

• 방송공학회논문지
• /
• 제21권6호
• /
• pp.957-964
• /
• 2016

요즘 들어, 3차원 콘텐츠의 수요는 지속적으로 증가하고 있다. 3차원 콘텐츠의 품질은 해당 장면의 깊이 정보에 큰 영향을 받기 때문에 정확한 깊이 정보를 얻는 것이 매우 중요하다. 카메라와 객체 사이의 깊이 정보는 적외선 센서를 이용한 계산을 통해 직접 얻을 수 있다. 최근 들어, KINECT 카메라와 같이 카메라와 물체 사이의 거리를 적외선이나 광신호를 이용하여 직접 측정하는 Time-of-flight (ToF) 기술을 사용하는 깊이 측정 방법이 널리 사용되고 있다. 이러한 방법은 카메라와 객체 사이의 깊이 정보를 실시간으로 획득할 수 있다는 장점을 갖지만, 획득된 깊이맵에 잡음이 발생하고, 깊이맵의 해상도가 낮다는 단점을 갖는다. 최근 들어, 이런 문제를 해결하기 위해서 양방향 결합 업샘플링 방법 (JBU) 이나 잡음 제거 업샘플링 방법 (NAFDU) 과 같은 필터 기반의 방법이 제안되었다. 그러나 이러한 필터 기반의 업샘플링 방법은 업샘플링된 깊이맵에 색상영상의 질감이 복사되는 문제가 발생한다. 이 논문에서는 이러한 문제점을 해결하기 위해 고차 정규화항을 이용하여 에너지 함수를 만들고, 이를 최적화하여 깊이맵을 업샘플링 한다. 또한, 색상과 깊이맵의 경계 정보를 고려한 경계 가중치항을 추가하여 질감 복사 문제를 해결한다. 실험 결과, 제안하는 깊이맵 업샘플링 방법이 기존의 방법에 비해 깊이 정보의 품질은 유지하면서, 질감 복사 문제를 효과적으로 해결할 수 있음을 확인했다.

• 대한기계학회논문집B
• /
• 제29권2호
• /
• pp.263-270
• /
• 2005

An experimental study was performed to investigate the effects of partially premixing, varying the equivalence ratios from $0.79{\sim}{\infty}$, on NOx emissions and chemiluminescence of excited $OH^{\ast},\;CH^{ast}\;C_2^{\ast}$ radicals in laminar partially premixed flames. the signal from the electronically excited state of $OH^{\ast},\;CH^{ast}\;C_2^{\ast}$ was detected through a band pass filter with a photo multiplier tube, which are processed to the intensity ratio ($C_2^{\ast}/CH^{\ast},\;C_2^{\ast}/OH^{\ast},\;and\;CH^{\ast}/OH^{\ast}$) to reveal the correlation with local equivalence ratio. And measurements of NOx emission were made to investigate the relationship between visible flame appearance, chemiluminescence, and EINOX. The results demonstrated that (1) the flames at ${\phi}<1.59$ exhibited classical double flame structure, at ${\phi}>4.76$, the flames exhibited diffusion flame structure, and the intermediate flames at $1.59<{\phi}<4.76$ was a merged flame, (2) the $OH^{\ast}$ peak was located inside the $CH^{\ast}\;and\;C_2^{\ast}$ radical for all measured conditions and the emission intensity ratio of $C_2^{\ast}/CH^{\ast}\;and\;C_2^{\ast}/OH^{\ast}$ were identified as good marker for local equivalence ratio over a range of ${\phi}=0.79{\sim}1.2\;and\;CH^{\ast}/OH^{\ast}\;is\;0.79<{\phi}<1.9$. However, it was difficult to predict the equivalence ratio in partially premixed flames using this system for ${\phi}>2.38$, (3) the minimum NOX emission index (EINOx) is obtained for a equivalence ratio of 3.19 in the intermediate flames.

• 한국산업보건학회지
• /
• 제9권1호
• /
• pp.173-186
• /
• 1999

To utilize diffuse sampling of formaldehyde in air, a new sampler was designed. A glass fiber filter was impegnated with 2,4-dinitrophenylhydrazine(DNP) and phosphoric acid and mounted 37mm cassette. The formaldehyde vapor was sampled in the dynamic chamber and measured by high performance liquid chromatograph and compared with solid sorbent tube. The results were as follows ; 1. The desorption efficiencies of diffusive sampler between 97.0% and 100%. 2. the sampling rate is constant as in $58{\sim}61.8m{\ell}/min$ when sampling times are between 120 and 360 min. 3. There was a significant relationship between concentrations of diffusive samples and active samples with the coefficient of determination(R2) of 0.92. 4. Desorbed amount of formaldehyde diffusive sampler was increased by high relative humidity. 5. Wheth diffusive samplers were stored at room temperature or at refrigerator there was no statistically significant difference in the accuracy of result. 6. When the diffusive samplers, which collected formaldehyde vapor, were exposed to clean air for three hours, there was no significant loss of formaldehyde due to reverse diffusion. In conclusion, this study suggest that developed diffusive samplers will be a reasonable substitute for the solid sorbent tube for sampling formaldehyde and practical comparative study of developed diffusive sampler should be performed at workplaces of manufacturing industry.

• Journal of Pharmaceutical Investigation
• /
• 제38권6호
• /
• pp.357-363
• /
• 2008

Penetration rate of large molecule through skin is very low due to the barrier effect of stratum corneum. Novel microneedle treatment device with roll was designed for transdermal delivery of large molecular drugs such as vaccine and protein drugs. The permeation rates of FITC labelled bovine serum albumin (FITC-BSA) as a model protein were determined using modified Franz diffusion cell and hairless mouse skin which were treated by hydrogel or solution containing FITC-BSA. Fluorescent spectrophotometer was used to analyze the concentration of FITC-BSA. Microscope using fluorescent filter was used to capture the image and location of FITC-BSA in the skin. We confirmed that permeation rate of BSA was increased with the treatment by microneedle and was increased by the increasing frequency of treatment. Furthermore, the permeation rate observed from hydrogel treated skin was significantly higher than that from solution treated skin.

• 멤브레인
• /
• 제15권3호
• /
• pp.198-205
• /
• 2005

방사능 오염도 측정에 사용하기 위한 이중구조 고분자막이 폴리설폰과 세륨활성화된 이트륨실리케이트(CAYS)를 이용하여 제조되었다. 제조된 막은 순수 고밀도 고분자 지지층과 이에 제막된 고분자 용액의 상전환 공정에 의해 고형화된 CAYS 함침 활성층의 이중구조로 구성된다. 제막공정에서 대기방치 공정이 생략되었을 때 CAYS를 포함하는 활성층은 전형적인 비대칭 구조를 지니며, CAYS 입자들이 고분자 구조 사이에 박혀있는 형상을 지닌다. 제막공정에서 대기에 방치하는 시간이 증가할수록 막의 형상은 스폰지 구조를 띠며 CAYS는 고분자 구조로부터 분리되어 막 내부에 셀 같은 공간에 밀집되어 존재함을 보였다. 한편, 두 충 사의 계면형상은 고분자 고형화 과정에서의 상전환 속도와 밀접한 관련되었으며, 대기방치 시간의 증가에 따라 계면의 구분이 뚜렷하게 나타나지 않았다. 방사능 탐지 특성에서 스폰지 구조를 지니는 막의 고분자 구조는 방사성핵종이 통과할 수 없는 밀집된 형상을 지니면서 탐지효율의 감소를 초래하는 것으로 나타났다.

• Journal of Information Processing Systems
• /
• 제13권4호
• /
• pp.653-667
• /
• 2017

The significant advances in information and communication technologies are changing the process of how information is accessed. The internet is a very important source of information and it influences the development of other media. Furthermore, the growth of digital content is a big problem for academic digital libraries, so that similar tools can be applied in this scope to provide users with access to the information. Given the importance of this, we have reviewed and analyzed several proposals that improve the processes of disseminating information in these university digital libraries and that promote access to information of interest. These proposals manage to adapt a user's access to information according to his or her needs and preferences. As seen in the literature one of the techniques with the best results, is the application of recommender systems. These are tools whose objective is to evaluate and filter the vast amount of digital information that is accessible online in order to help users in their processes of accessing information. In particular, we are focused on the analysis of the fuzzy linguistic recommender systems (i.e., recommender systems that use fuzzy linguistic modeling tools to manage the user's preferences and the uncertainty of the system in a qualitative way). Thus, in this work, we analyzed some proposals based on fuzzy linguistic recommender systems to help researchers, students, and teachers access resources of interest and thus, improve and complement the services provided by academic digital libraries.

• 한국입자에어로졸학회지
• /
• 제19권4호
• /
• pp.101-110
• /
• 2023

In order to reduce particulate matters (PM) from marine diesel engines, we developed novel electrostatic diesel particulate matter filtration system. Electrostatic diesel particulate filtration (DPF) system consists of electrostatic charger and filtration part. The electrostatic charger and filtration part are composed of a metal discharge electrode and a metal fiber filter (porosity: 68.1-86.1%), respectively. In the electrostatic charger part, diesel soot particles are reduced by electrostatic force. The filtration part after electrostatic charger part reduces diesel soot particles through inertial and diffusion forces. The filtration efficiency of electrostatic DPF system was examined through the experiments using engine dynamometer system (300 kW) and ship (200 kW). The PM reduction efficiencies due to inertial and electrostatic forces showed about 70-75% and 80-90%, respectively, according to the RPM of the engine. The differential pressure of the electrostatic DPF system applied to the ship was about 1-9 mbar, which was less than the allowable differential pressure for ship engines in South Korea (100 mbar). The results show that the electrostatic DPF system is suitable for application to the PM reduction emitted from ships.

• 대한의용생체공학회:의공학회지
• /
• 제32권3호
• /
• pp.245-250
• /
• 2011

Parallel imaging technique can provide several advantages for a multitude of MRI applications. Especially, in SENSE technique, sensitivity maps were always required in order to determine the reconstruction matrix, therefore, a number of difference approaches using sensitivity information from coils have been demonstrated to improve of image quality. Moreover, many filtering methods were proposed such as adaptive matched filter and nonlinear diffusion technique to optimize the suppression of background noise and to improve of image quality. In this study, we performed SENSE reconstruction using computer simulations to confirm the most suitable method for the feasibility of filtering effect and according to changing order of polynomial fit that were applied on variation of spatial resolution of sensitivity map. The image was obtained at 0.32T(Magfinder II, Genpia, Korea) MRI system using spin-echo pulse sequence(TR/TE = 500/20 ms, FOV = 300 mm, matrix = $128{\times}128$, thickness = 8 mm). For the simulation, obtained image was multiplied with four linear-array coil sensitivities which were formed of 2D-gaussian distribution and the image was complex white gaussian noise was added. Image processing was separated to apply two methods which were polynomial fitting and filtering according to spatial resolution of sensitivity map and each coil image was subsampled corresponding to reduction factor(r-factor) of 2 and 4. The results were compared to mean value of geomety factor(g-factor) and artifact power(AP) according to r-factor 2 and 4. Our results were represented while changing of spatial resolution of sensitivity map and r-factor, polynomial fit methods were represented the better results compared with general filtering methods. Although our result had limitation of computer simulation study instead of applying to experiment and coil geometric array such as linear, our method may be useful for determination of optimal sensitivity map in a linear coil array.