• 콘크리트학회논문집
• /
• 제15권6호
• /
• pp.902-912
• /
• 2003

전 세계적으로 콘크리트 구조물의 열화를 발생하는 가장 중요한 원인은 중성화와 염소이온이다. 대체적으로 많은 콘크리트 구조물에서 염소이온과 중성화로 인하여 철근이 부식되며 이에 대한 많은 연구가 이루어지고 있다. 그러나 실구조물의 상황은 염소이온과 중성화가 복합적으로 발생함에도 불구하고 많은 연구들이 각각의 단일열화에 대한 연구가 이루어지고 있으며 복합열화에 대한 연구는 매우 드문 상황이다. 본 연구는 2중 복합 매체에 대한 확산모델을 이용하여 중성화된 콘크리트의 염소이온 프로파일을 예측하고자 하였다. 실험결과에 의하여 중성화 깊이로부터 3∼5 mm영역에 염소이온의 농축현상이 발생하였으며 2중 복합 구조체에 적용할 수 있는 확산 방정식에 중성화된 콘크리트와 비중성화된 콘크리트의 시간의존적인 염소이온 확산 계수를 고려하여 내구수명예측에 반영하였다.

• 한국건축시공학회지
• /
• 제4권1호
• /
• pp.119-126
• /
• 2004

Generally, reinforced concrete is one of the most commonly used structural materials and it prevents corrosion of steel bar by high pH of interior, But, as time elapsed, reinforced concrete structure become deteriorated by many of combined deterioration factors and environmental conditions. And, there are large number of deteriorate mechanism of the reinforced concrete structure and it acts complexly. It is recognized that steel bar corrosion is the main distress behind the present concern regarding concrete durability. In this study, to institute combined deterioration environments, established acceleration condition and cycle for combined deterioration environments has a resemblance to environments which are real structures placed. After that to confirm corrosion properties of reinforced concrete due to permeability with covering depth and types of surface cover under combined deterioration environments, measured carbonation velocity coefficients, chloride ion diffusion coefficients, water absorption coefficients, air permeability coefficients and electric potential, corrosion area ratio, weight reduction, corrosion velocity of steel bar. The results showed that an increase in age also decrease carbonation velocity coefficients, increase Chloride ion diffusion coefficients and increases water absorption coefficients. As well, an increase in age also increases corrosion of steel bar. Data on the development of corrosion velocity of steel bar with types of surface cover made with none, organic B, organic A, inorganic B, and inorganic A is shown. As well, permeability and corrosion velocity of steel bar with covering depth is superior to 10mm than 20mm. And it is confirmed permeability and corrosion properties of steel bar are closely related.

• 한국표면공학회지
• /
• 제47권5호
• /
• pp.227-232
• /
• 2014

In this study, we propose the application of doping process technology for atmospheric pressure plasma. The plasma treatment means the wafer is warmed via resistance heating from current paths. These paths are induced by the surface charge density in the presence of illuminating Argon atmospheric plasmas. Furthermore, it is investigated on the high-concentration doping to a selective partial region in P type solar cell wafer. It is identified that diffusion of impurities is related to the wafer temperature. For the fixed plasma treatment time, plasma currents were set with 40, 70, 120 mA. For the processing time, IR(Infra-Red) images are analyzed via a camera dependent on the temperature of the P type wafer. Phosphorus concentrations are also analyzed through SIMS profiles from doped wafer. According to the analysis for doping process, as applied plasma currents increase, so the doping depth becomes deeper. As the junction depth is deeper, so the surface resistance is to be lowered. In addition, the surface charge density has a tendency inversely proportional to the initial phosphorus concentration. Overall, when the plasma current increases, then it becomes higher temperatures in wafer. It is shown that the diffusion of the impurity is critically dependent on the temperature of wafers.

• 한국방사선학회논문지
• /
• 제12권1호
• /
• pp.101-106
• /
• 2018

다층박막거울은 높은 반사 효율로 엑스선을 단색화 하는데 많이 사용되고 있다. 반사되는 엑스선의 파장은 두께주기와 입사각도에 의해 결정되고, 반사율은 층수와 표면 거칠기에 크게 의존하게 된다. 다층박막거울은 중원소와 경원소가 번갈아 적층되어 있는 구조로 되어 있으며 각 계면에서의 거칠기를 고려해야 한다. 본 논문에서는 두께 변화 W/Si 다층박막거울에서 계면 거칠기와 상호확산을 동시에 고려하여 반사율을 조사하였다. 두께 변화 다층박막거울은 균일한 다층박막거울에 비해 반사율은 감소하나 각도 및 에너지 반치폭이 넓은 특징을 보였으며, 상호확산에 따른 반사율의 저하가 크게 증가하였다. 이론적인 설계값에 가까운 반사율을 획득하기 위해서는 다층박막거울을 제작 할 때 나타나는 상호확산의 효과를 고려하여 설계함으로써 목적에 부합하는 최적의 다층박막거울을 설계하고 제작할 수 있을 것이다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술대회지
• /
• pp.71-76
• /
• 2004

This paper investigate that the effect of the concrete containing mineral admixtures(pozzolanic materials such as fly-ash, ground granulated blast-furnace slag, silica fume and meta kaolin) on the resistance properties to chloride ion invasion. The purposed testing procedure was applied to the concrete added mineral admixtures for $3\sim4$ replacement ratios under W/B ratios ranged from 0.40 to 0.55. Specimens were immersed in $3.6\%$ NaCl solution for 330 days, and penetration depth, water soluble chloride contents and acid soluble chloride contents were measured in 28, 91, 182 and 330 days. Then, diffusion coefficient were calculated using total chloride contents. As a results. the kinds of mineral admixture and replacement ratios had a great effect on the resistance property of the concrete to chloride ion invasion compared with the plain concrete. And the optimal replacement ratios of mineral admixture had a limitation for each admixtures. The amount of acid soluble chloride ions and water soluble chloride ions were varied with the kinds of mineral admixtures and the penetration depth from the concrete skin. Chloride diffusion coefficient of each concretes decreased with the time elapsed. and the diffusion coefficients of the concrete immersed salt water for 330 days had a establishment with the compressive strength measured before immersing.

• 한국구조물진단유지관리공학회 논문집
• /
• 제19권1호
• /
• pp.128-138
• /
• 2015

탄산화는 지하구조물과 같이 이산화탄소의 농도가 높고 강우로부터 보호되는 콘크리트 구조물에 매우 심각한 열화현상이다. 탄산화 깊이 및 수화물의 변화를 평가하기 위해 많은 연구가 진행되고 있으나 해석모델의 복잡성, 이산화탄소 확산계수 모델링 등의 어려움으로 인해 실제 탄산화 거동을 제한적으로 모사하고 있다. 본 연구에서는 기존의 탄산화 모델링 (Ducom)에 대하여 확산계수 모델링, 공극률 감소 모델, 이산화탄소의 장기반응률 등을 개선하여 개선된 탄산화 모델을 제시하였다. 검증을 위하여 온도변화를 고려한 촉진탄산화 시험. 공극률 평가 시험 (수은압입법)을 수행하였으며, 탄산화 깊이를 개선되기 전/후의 모델과 비교하였다. 또한 수산화칼슘의 중량변화와 실태조사결과를 이용하여 낮은 이산화탄소에 노출된 콘크리트 구조물의 탄산화 깊이를 제안된 모델과 비교하였다. 제안된 모델은 확산계수 감소성, 공극률 감소성을 적절하게 반영하여 기존의 모델에 비해 합리적인 결과 (수산화칼슘 소모량, 탄산화 깊이)를 나타내었다.

• 한국분말재료학회지
• /
• 제23권6호
• /
• pp.432-436
• /
• 2016

We investigate the microstructural and magnetic property changes of $DyH_2$, $Cu+DyH_2$, and $Al+DyH_2$ diffusion-treated NdFeB sintered magnets with the post annealing (PA) temperature. The coercivity of all the diffusion-treated magnets increases with increasing heat treatment temperature except at $910^{\circ}C$, where it decreases slightly. Moreover, at $880^{\circ}C$, the coercivity increases by 3.8 kOe in Cu and 4.7 kOe in Al-mixed $DyH_2$-coated magnets, whereas this increase is relatively low (3.0 kOe) in the magnet coated with only $DyH_2$. Both Cu and Al have an almost similar effect on the coercivity improvement, particularly over the heat treatment temperature range of $790-880^{\circ}C$. The diffusivity and diffusion depth of Dy increases in those magnets that are treated with Cu or Al-mixed $DyH_2$, mainly because of the comparatively easy diffusion path provided by Cu and Al owing to their solubility in the Nd-rich grain boundary phase. The formation of a highly anisotropic $(Nd,\;Dy)_2Fe_{14}B$ phase layer, which acts as the shell in the core-shell-type structure so as to prevent the reverse domain movement, is the cause of enhanced coercivity of diffusion-treated Nd-Fe-B magnets.

• 한국정보시스템학회지:정보시스템연구
• /
• 제22권1호
• /
• pp.225-248
• /
• 2013

Korean government has been implementing a smart grid testbed in Jeju Island for the low-carbon green growth. As smart grids are in the early stage of their diffusion, strategic guidelines and related measures are needed to spread them successfully. In general, the successful diffusion of new technologies or new products are mostly determined in its early stages. With the introduction of smart grids, the electricity market paradigm will be transformed into user-oriented from provider-oriented. Thus, a study on the diffusion of smart grids from the perspective of users is necessary. This paper examines factors affecting the adoption and diffusion of smart grids from users' perspectives and provide strategic guidelines for diffusing the smart grid. Researchers conducted in-depth interviews with 41 people who have been already using smart grids in the Jeju testbed. Semi-structured interviews were used to collect data. The interviews were recorded on a digital voice recorder memory and subsequently transcribed verbatim. A total of 133 pages of transcripts were obtained from about 10 hours interviews. 97 concepts, 47 sub-categories and 19 categories were identified through open coding of grounded theory. We suggested a paradigm model for diffusing smart grids and total of seven propositions as strategic guidelines.

• 한국구조물진단유지관리공학회 논문집
• /
• 제8권2호
• /
• pp.239-246
• /
• 2004

콘크리트의 구조물의 내구성을 향상시키기 위해서는 W/C의 감소, 피복두께의 증가, 혼화재의 사용 등을 예로 들 수 있다. 특히, 혼화재를 사용한 경우 콘크리트의 수밀성이 향상되고 구조체의 내구성이 향상되는 것으로 보고되고 있으나 염소이온 확산에 대해서는 보다 체계적인 연구를 수행할 필요가 있다. 또한 혼화재를 사용한 콘크리트의 경우, 혼화재 종류에 따라 포졸란반응 및 잠재수경성 등에 의해 콘크리트 내부조직의 변화가 발생하므로 콘크리트의 염소이온 확산에 대한 보다 정확한 평가를 위해서는 콘크리트 내부의 조직을 평가할 수 있는 요소들을 고려해야 한다. 이에 본 연구에서는 혼화재를 사용한 콘크리트의 내구수명을 평가하기 위한 연구의 일환으로 콘크리트의 압축강도, 공극률, 투기성을 물리적 특성으로 설정하고 이들과 염소이온 확산계수와의 관계를 분석하였다.

• 지역사회간호학회지
• /
• 제28권2호
• /
• pp.129-143
• /
• 2017

Purpose: The purpose of this study is to explore factors which influence adoption, implementation and continued use of tele-healthcare systems. Methods: Qualitative research was conducted by in-depth interviews with 17 professionals from various fields of organizations involved in developing and implementing tele-healthcare systems. Data were analysed thematically, using a conceptual model of diffusion of innovations. Results: The system users were reacted positively to the 3 attributes out of 9 which decided the adoption of innovation. In addition, it is required to redesign the tele-health care system simpler and easier so that the system users can access to the system much more easily regardless of space and time limitations. From the design stage on an individual level, it is necessary to conduct detailed needs analysis and listen to users who are at the center of innovation diffusion. On an organizational level, it is necessary to actively prepare for possible problems during system implementation, educate the users and build communication channels continuously. Conclusion: This study has identified the factors affecting the innovation of tele-health care systems and contributed to the understanding of the operation of tele-health care systems by the diffusion of innovation theory in community health posts.