• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.8
• /
• pp.877-885
• /
• 2005

The Froude scaling between the prototype and the model was tried to estimate the necessary ventilation rate for non-isothermal concentrated fume from the semi-closed inner space. Based on the non-dimensional similitude equations derived from the Zukoski plume rise analysis, the scaling experiments were done to verify the relationship of the non-dimensional energy release rate and the non-dimensional mass flow rate by using two different scaled volume models, model A ($1\;m{\times}1\;m{\times}1\;m$) and model B ($0.5\;m{\times}0.5\;m{\times}0.5\;m$). The experimental results showed that the theoretical similitude between the models is acceptable for the prediction of ventilation rate of the concentrated fume. The maximum energy release rate used for the experiments was $20\;kW/m^3$. In the experimental range, the similitude between the energy release rate and the ventilation mass flow rate was well defined and the necessary ventilation rates were 20-30% higher than the stoichiometric ventilation mass flow rate. Based on results of current study, the design of the local air ventilation system can be improved by correcting the effects of buoyancy and diffusion of the non-isothermal concentrated fume.

• Journal of the Korean Vacuum Society
• /
• v.9 no.4
• /
• pp.315-320
• /
• 2000

We have investigated the crystal structure and electrical properties of Pt/SBT/$ZrO_2$/Si (MFIS) and Pt/SBT/Si (MFS) structures for the gate oxide of ferroelectric memory. XRD spectra and SEM showed that the SBT film of SBT/$ZrO_2$/Si structure had larger grain than that of SBT/Si structure. $ZrO_2$ film between SBT film and Si substrate is confirmed as a good candidate for a diffusion barrier by the analysis of AES. The remanent polarization decreased and coercive voltage increased in Pt/SBT/$ZrO_2$/Pt/$SiO_2$/Si structure. This effect may increase memory window of MFIS structure directly related to the coercive voltage. From the capacitance-volt-age characteristics, the memory windows of Pt/SBT (210 nm)/$ZrO_2$ (28 nm)/Si structure were in the range of 1~l.5 V at the applied voltage of 4~6 V. The current densities of Pt/SBT/ZrO$_2$/Si with as -deposited Pt electrode and annealed at $800^{\circ}C$ in $O_2$ambient were $8\times10^{-8} A/\textrm{cm}^2$ and $4\times10^{-8}A/\textrm{cm}^2$ , respectively.

• Journal of the Korean Society for Heat Treatment
• /
• v.20 no.2
• /
• pp.84-93
• /
• 2007

Microstructural changes during tempering at the temperature range of $300^{\circ}C{\sim}700^{\circ}C$ for the nitrogen-permeated STS 410 and 410L martensitic stainless steels has been investigated. After nitrogen permeation at temperature between 1050 and $1150^{\circ}C$, the surface layer appeared fine $Cr_2N$ of square and rod types in the martensite matrices. Hardness of the nitrogen-permeated surface layer represented 680Hv and 625Hv, respectively, for 410 and 410L steels. It is considered that the fine homogeneously dispersive effect of precipitates by nitrogen caused the increased hardness. Due to the counter current effect of carbon from interior to surface during nitrogen diffusion from surface to interior, the 0.1%C alloyed 410 steel showed the low nitrogen content of 0.025% compared with 0.045% of 410L steel at the distance of $100{\mu}m$ from the surface. Tempering of nitrogen-alloyed 410 and 410L showed the maximum hardness at $450^{\circ}C$. This maximum hardness was considered to be the secondary hardening effect of very fine carbide and nitride. The decrease in hardness at $700^{\circ}C$ was the softening effect of the matrix due to the precipitation of many needle-shaped $Cr_2N$ for 410 steel and the precipitation of coarse nitride of $Cr_2N$ in line with the spherical precipitates with directionality for 410L steel. For 410 steel, the corrosion resistance of nitrogen permeated surface in the solution of 1 N $H_2SO_4$ were nearly unchanged, however the superior corrosion resistance was obtained for nitrogen permeated 410L steel compared to the solution annealed condition.

• Journal of the Korean Society for Library and Information Science
• /
• v.48 no.1
• /
• pp.171-194
• /
• 2014

The purpose of this study is to understand the current status of 'One Book, One City' community-wide reading campaign by analyzing the characteristics of the books selected during the past fifteen years. According to the lists of 'One Book, One City' Reading Promotions Projects' available from the website of the Library of Congress, the Center for the Books, a total of 1,037 books were selected by 2,220 'One Book' programs. Major findings are as follows: First, 278 books (26.8%) and 759 books (73.2%) were selected by more than two 'One Book' programs and one program, respectively; Second, three most popular books were To Kill a Mockingbird (chosen in 84 programs), Fahrenheit 451 (in 53 programs), and The Kite Runner (in 50 programs); Third, with the wide diffusion of 'One Book' campaigns, the selection of unique books by individual 'One Book' programs has increased, and the impact of the books selected by 'Seattle Reads' and 'One Book, One Chicago' has gradually decreased.

• Korean Journal of Clinical Laboratory Science
• /
• v.48 no.2
• /
• pp.94-101
• /
• 2016

Acinetobacter species isolates are important opportunistic pathogens and commonly implicated in nosocomial infections. The therapeutic options for treatment of the bacterial infections are limited because the bacteria isolates are usually multidrug resistant (MDR). In the current study, we investigated various carbapenemase genes in 68 Acinetobacter species isolates. Antimicrobial susceptibilities were tested using the disk diffusion method. Screening of carbapenemase genes was performed via multiplex PCR. In addition, PCR and DNA sequencing were used to identify the carbapenemase genes. Repetitive extragenic palindromic-PCR (REP-PCR) was also performed to assess the clonality of isolates. In our study, A. baumannii isolates were highly resistant to all agents tested while all non-A. baumannii isolates were susceptible to all agents tested, with the exception of aztreonam and cefotaxime. All 51 A. baumannii isolates contained the $bla_{OXA-51}$ gene and 37 (72.5%) isolates also harbored the $bla_{OXA-23}$ gene. In addition, 39 MDR A. baumannii isolates were identified in our study and 37 isolates contained the $bla_{OXA-23}$ gene. The 37 MDR strains harboring $bla_{OXA-23}$ showed type I (n=22) or type II (n=15) banding patterns on their REP-PCR profiles. Our results suggest clonal relation and horizontal spreading of MDR A. baumannii isolates containing the $bla_{OXA-23}$ gene at the hospital located in Daejeon. Continuous investigation of antimicrobial resistant determinants and monitoring emergence and dissemination of MDR isolates is required to prevent and control infection and colonization of MDR A. baumannii isolates.

• Korean Journal of Materials Research
• /
• v.4 no.2
• /
• pp.143-151
• /
• 1994

On PT/Ti/Si substrates, PZT thln fllms are deposited at $300^{\circ}C$ by rf magnetron sputtering uslng a $(PbZr_{52}, Ti_{48})O_{3}$ composltc cerarnlc target. To abtaln, the stable phase, perovskltc structure, furnace annealmg techmque had been cmplo:~d In PbO amb~ent for the $550^{\circ}C$-$750^{\circ}C$ temperature ranges. On Pt(250$\AA$)/Ti(500$\AA$)/Si, Pt(1000)$\AA$/Ti(500$\AA$)/Si substrates, effects of Ti layer and Pt thickness are studled. Though thickness of the Pt layer 1s 1000$\AA$). oxygen diffusion is not prevented and accelerated by Ti layer actlng for oxygen sink sites durmg furnace annealing. The upper TI layer 1s transformed Into TIOX by oxyen dlffuslon and lower Ti layer Into silicide with in-diffused Pt. The formation of TiOx layer seems to affect the orlentatton of the PZT layer. Furnace annealed f~lm shows ferroelectr~c and electrical properties wth a remanent polarlzation of 3.3$\mu A /\textrm{cm}^2$, , coerclve fleld of 0.15MV/cm, a=571 (10kHz), leakage current 32.65$\mu A /\textrm{cm}^2$, , breakdown voltage of 0.4OMV/cm.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.72-72
• /
• 2012

Lithium rechargeable batteries have been widely used as key power sources for portable devices for the last couple of decades. Their high energy density and power have allowed the proliferation of ever more complex portable devices such as cellular phones, laptops and PDA's. For larger scale applications, such as batteries in plug-in hybrid electric vehicles (PHEV) or power tools, higher standards of the battery, especially in term of the rate (power) capability and energy density, are required. In PHEV, the materials in the rechargeable battery must be able to charge and discharge (power capability) with sufficient speed to take advantage of regenerative braking and give the desirable power to accelerate the car. The driving mileage of the electric car is simply a function of the energy density of the batteries. Since the successful launch of recent Ni-MH (Nickel Metal Hydride)-based HEVs (Hybrid Electric Vehicles) in the market, there has been intense demand for the high power-capable Li battery with higher energy density and reduced cost to make HEV vehicles more efficient and reduce emissions. However, current Li rechargeable battery technology has to improve significantly to meet the requirements for HEV applications not to mention PHEV. In an effort to design and develop an advanced electrode material with high power and energy for Li rechargeable batteries, we approached to this in two different length scales - Atomic and Nano engineering of materials. In the atomic design of electrode materials, we have combined theoretical investigation using ab initio calculations with experimental realization. Based on fundamental understanding on Li diffusion, polaronic conduction, operating potential, electronic structure and atomic bonding nature of electrode materials by theoretical calculations, we could identify and define the problems of existing electrode materials, suggest possible strategy and experimentally improve the electrochemical property. This approach often leads to a design of completely new compounds with new crystal structures. In this seminar, I will talk about two examples of electrode material study under this approach; $LiNi_{0.5}Mn_{0.5}O_2$ based layered materials and olivine based multi-component systems. In the other scale of approach; nano engineering; the morphology of electrode materials are controlled in nano scales to explore new electrochemical properties arising from the limited length scales and nano scale electrode architecture. Power, energy and cycle stability are demonstrated to be sensitively affected by electrode architecture in nano scales. This part of story will be only given summarized in the talk.

• Smart Media Journal
• /
• v.9 no.1
• /
• pp.75-83
• /
• 2020

Compensation services that are indispensable during large-scale public utilities projects have been gradually increasing with the recent increase in construction, but there are no systematic compensation services due to the complicated procedures and manual work. For this reason, various problems such as construction period delays due to various complaints, corruption in compensation work, and impossible to trace the history of compensation data in the past are emerging. In this paper, in order to solve this problem, in-depth interviews and questionnaires were conducted to find out the problems of each compensation status. Based on this, 3 core technologies and 10 technical needs based on ICT were selected to improve the compensation work by deriving STEEP analysis and Issue Tree. The three core technologies are big data-based decision-making and prediction technology, advanced measurement technology, and open cloud-based compensation platform technology. In order to introduce the derived technologies to the institutions in charge of compensation, the possibility of technology diffusion by project operators was suggested based on the results of the current status of informatization by institution. Based on the core technology derived from this paper, it is necessary to make a prototype that can be advanced in compensation work and apply it to each institution and analyze the effect.

• Fisheries and Aquatic Sciences
• /
• v.21 no.2
• /
• pp.6.1-6.10
• /
• 2018

The intention of this study was to identify the bacterial pathogens infecting Oreochromis niloticus (Nile tilapia) and Clarias gariepinus (African catfish), and to establish the antibiotic susceptibility of fish bacteria in Uganda. A total of 288 fish samples from 40 fish farms (ponds, cages, and tanks) and 8 wild water sites were aseptically collected and bacteria isolated from the head kidney, liver, brain and spleen. The isolates were identified by their morphological characteristics, conventional biochemical tests and Analytical Profile Index test kits. Antibiotic susceptibility of selected bacteria was determined by the Kirby-Bauer disc diffusion method. The following well-known fish pathogens were identified at a farm prevalence of; Aeromonas hydrophila (43.8%), Aeromonas sobria (20.8%), Edwardsiella tarda (8.3%), Flavobacterium spp. (4.2%) and Streptococcus spp. (6.3%). Other bacteria with varying significance as fish pathogens were also identified including Plesiomonas shigelloides (25.0%), Chryseobacterium indoligenes (12.5%), Pseudomonas fluorescens (10.4%), Pseudomonas aeruginosa (4.2%), Pseudomonas stutzeri (2.1%), Vibrio cholerae (10.4%), Proteus spp. (6.3%), Citrobacter spp. (4.2%), Klebsiella spp. (4.2%) Serratia marcescens (4.2%), Burkholderia cepacia (2.1%), Comamonas testosteroni (8.3%) and Ralstonia picketti (2.1%). Aeromonas spp., Edwardsiella tarda and Streptococcus spp. were commonly isolated from diseased fish. Aeromonas spp. (n = 82) and Plesiomonas shigelloides (n = 73) were evaluated for antibiotic susceptibility. All isolates tested were susceptible to at-least ten (10) of the fourteen antibiotics evaluated. High levels of resistance were however expressed by all isolates to penicillin, oxacillin and ampicillin. This observed resistance is most probably intrinsic to those bacteria, suggesting minimal levels of acquired antibiotic resistance in fish bacteria from the study area. To our knowledge, this is the first study to establish the occurrence of several bacteria species infecting fish; and to determine antibiotic susceptibility of fish bacteria in Uganda. The current study provides baseline information for future reference and fish disease management in the country.

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.118-124
• /
• 2005

In this study, a novel deposition method of Pt catalysts onto Nafion membranes modified with polypyrrole (PPy) has been proposed for PEMFC application. The PPy/Nafion composite membranes were fabricated by chemical polymerization of pyrrole using $FeCl_3$ and $Na_2S_2O_8$ as initiator. The proton conductivity and water uptake of the chemically prepared PPy/Nafion composites were investigated. The ionic conductivity and water uptake of PPy/Nafion composite membrane prepared with $Na_2S_2O_8$ were decreased with polymerization time of pyrrole. In the case of $FeCl_3$, the ionic conductivity was almost retained and the water uptake was decreased with polymerization time of pyrrole. When the Pt particle was deposited on PPy/Nafion composites membrane by chemical reduction of $H_2PtCl_6$, the Pt loading on Nafion membrane was enhanced by polypyrrole due to electronic conduction property. The performance evaluation with membrane electrode assembly composed of Pt/PPy/Nafion composite and diffusion electrode was carried out using a single cell. As a result of fuel cell test, current density of $569mA/cm^2$ at 0.3 V has been obtained for MEA contained with Pt/PPy/Nafion composite. This study shows that direct deposition of Pt catalysts on Nafion impregnated polypyrrole is a promising method to prepare thin catalyst layer for the PEMFC.