• 한국분말재료학회지
• /
• 제4권3호
• /
• pp.196-204
• /
• 1997

Joining of AIN ceramics to W and Cu by active-metal brazing method was tried with use of (Ag-Cu)-Ti alloy as insert-metal. Joints were produced under various conditions of temperature, holding time and Ti-content in (Ag-Cu) alloy Reaction and microstructural development in bonded interface were investigated through observation and analysis by SEM/EDS, EPMA and XRD. Joint strengths were measured by shear test. Bonded interface consists of two layers: an insert-metal layer of eutectic Ag- and Cu-rich phases and a reaction layer of TiN. Thickness of reaction layer increases with bonding temperature, holding time and Ti-content of insert-metal. It was confirmed that the growth of reaction layer is a diffusion-controlled process. Activation energy for this process was 260 KJ/mol which is lower than that for N diffusion in TiN. Maximum shear strength of 108 MPa and 72 MPa were obtained for AIN/W and AIN/Cu joints, respectively. Relationship between processing variables, joint strength and thickness of reaction layer was also explained.

• 대한기계학회논문집B
• /
• 제34권7호
• /
• pp.679-688
• /
• 2010

본 연구에서는 기존의 역열전달 문제(inverse heat transfer problem)와 같이 역해석(inverse analysis)을 통해 미지의 파라미터를 추정(estimation)하는 개념을 복잡한 연소문제에 도입하였다. 기존의 연구에서는 역해석 기법을 연소문제 자체에 보다는 대부분 연소현상을 동반한 복사열전달과 같은 역열전달 문제에 국한해서 적용하고 있기 때문에, 열전달 문제에 한정되어 사용되고 있는 기존의 역해석을 새로운 공학문제에 확장하여 적용함과 동시에 효율적인 연소기 설계 및 최적화 개념을 제시하는데 본 연구의 의의가 있다고 할 수 있다. 이를 위해 실제적으로 많이 사용하고 있는 축대칭 원통형 연소기 내부로 주입되는 메탄($CH_4$)과 산소($O_2$) 성분의 초기 질량분율 값을 연소기 입구 근방에서 측정한 개스의 온도 데이터를 이용하여 역추정하였다. 이때, 복잡한 확산지배 연소 현상을 효율적으로 역해석하기 위해 최적화 방법 중의 하나인 반발 입자 군집 최적화 방법을 역해석 기법으로 적용하였다.

• Macromolecular Research
• /
• 제10권5호
• /
• pp.259-265
• /
• 2002

The cure kinetics of blends of epoxy (DGEBA, diglycidyl ether of bisphenol A)/anhydride resin with polyamide copolymer, poly(dimmer acid-co-alkyl polyamine), were studied using differential scanning calorimetry (DSC) under isothermal condition. On increasing the amount of polyamide copolymer in the blends, the reaction rate was increased and the final cure conversion was decreased. Lower values of final cure conversions in the epoxy/(polyamide copolymer) blends indicate that polyamide hinders the cure reaction between the epoxy and the curing agent. The value of the reaction order, m, for the initial autocatalytic reaction was not affected by blending polyamide copolymer with epoxy resin, and the value was approximately 1.3, whereas the reaction order, n, for the general n-th order of reaction was increased by increasing the amount of polyamide copolymer in the blends, and the value increased from 1.6 to 4.0. A diffusion-controlled reaction was observed as the cure conversion increased and the rate equation was successfully analyzed by incorporating the diffusion control term for the epoxy/anhydride/(polyamide copolymer) blends. Complete miscibility was observed in the uncured blends of epoxy/(polyamide copolymer) up to 120 $^{\circ}C$, but phase separations occurred in the early stages of the curing process at higher temperatures than 120 "C. During the curing process, the cure reaction involving the functional group in polyamide copolymer was detected on a DSC thermogram.gram.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.831-832
• /
• 2006

Solid-state processing via the bulk mechanical alloying enables us to directly fabricate $Mg_2X$ semi-conductive material performs. Precise control of chemical composition leads to investigation on the dilution and enrichment of X in $Mg_2X$. Two types of solid-state reactivity are introduced: e.g. synthesis of $Mg_2Si$ from elemental mixture Mg-Si is nucleation-controlled process while synthesis of $Mg_2Sn$ from Mg-Sn, diffusion-controlled process. Thermoelectricity of these $Mg_2X$ is evaluated for discussion on the validity and effectiveness of this new PM route as a reliable tool for fabrication of thermoelectric compounds.

• 한국기계가공학회지
• /
• 제20권2호
• /
• pp.51-57
• /
• 2021

The quality of the ceramic sintered coating on a metal surface through laser surface treatment is affected by the laser irradiation pattern. Depending on the laser irradiation pattern, the amount of residual stress and heat applied or accumulated on the surface increases or decreases, affecting the thickness attained in the ceramic sintering area. When the heat energy accumulated in the sintering area is high, the ceramic and the metal alloy melt and sufficiently mix to form a homogeneous and thick bonding interface. In this study, the thermal energy accumulation in the region sintered with zirconia was controlled using four types of laser processing patterns. The thickness of the diffusion region is analyzed by laser-induced breakdown spectroscopy of Mg-ZrO2 generated by laser sintering zirconia powder on the magnesium alloy surface. On the basis of the analysis of the Mg and Zr present in the sintered region through LIBS, the effect of the irradiation pattern on the sintering quality is confirmed by comparing and analyzing the heat and mass transfer tendency of the diffusion layer and the degree of diffusion according to the irradiation pattern. The derived diffusion coefficients differed by up to 9.8 times for each laser scanning pattern.

• 한국전기전자재료학회논문지
• /
• 제20권3호
• /
• pp.207-212
• /
• 2007

The concentration profiles of deep energy levels($E_c$ -0.23e V, $E_v$+0.36e V and $E_c$ -0.23e V) in platinum-diffused silicon have generally a sharp gradient in the vicinity of the surface of the silicon wafer. In this work two efficient methods are proposed to obtain the uniform concentration profiles throughout the silicon wafer. One is that the platinum diffusion is carried out at $1000^{\circ}C$ for 1h in oxygen atmosphere. In this case the values of obtained uniform concentration, $1{\times}10^{15}cm^{-3}$ for the $E_c$ -0.23e V level, and 1{\times}10^{14}cm^{-3}$ for the $E_c$ -0.52e V level, are very restricted, respectively. The other is two-step annealing process. The platinum diffusion is carried out at $850{\sim}1100^{\circ}C$ in a nitrogen ambient for 1h and then the annealing is performed at $1000^{\circ}C$ in oxygen ambient after removing platinum-source from the platinum diffused samples. The advantage of this method is that the uniform concentration of these levels required power devices can be controlled by setting the desired temperatures when the platinum diffusion is carried out in nitrogen ambient.

• Korean Journal of Acupuncture
• /
• 제24권2호
• /
• pp.1-17
• /
• 2007

Objectives : Extra Meridians are important conception for the proper comprehension of the defensive Gi & the defensive Gi, and the principle of the Gi (氣)‘s flow or diffusion. Methods : Extra Meridians could be explained by an anatomical feature and a functional stage. We should analyze the principle of samhap (三合) to have application to meridians. The study of the relationship between Extra Meridians and regular meridians (12正經) is useful to understand origination of the defensive Gi & the nutritive Gi. Results : The origination of the nutritive Gi & the defensive Gi could be interpreted by the principle of samhap correctly. The energic patterns in the flow of Gi (氣) are changed by cooperation with Extra Meridians and regular meridians (12正經). Conclusions : We could inferred that growth, disease, health, etc are controlled in cooperation with Extra Meridians (寄經脈) and the nutritive Gi & the defensive Gi (營衛). Extra Meridians take many parts in origination of the nutritive Gi & the defensive Gi, in the flow or diffusion of them but various energies are controlled basically by regular meridians (12正經). The defensive Gi is originated by Penetration Vessel (衝脈)) and it seems to be made by the principle of samhap (三合) in the process of the nutritive Gi flow (瀯氣流注).

• Journal of Welding and Joining
• /
• 제21권2호
• /
• pp.82-88
• /
• 2003

The bonding phenomenon and mechanism in the transient liquid phase bonding(TLP Bonding) of directionally solidified Ni base superalloy, GTD-111 was investigated. At the bonding temperature of 1403K, liquid insert metal was eliminated by isothermal solidification which was controlled by the diffusion of B and Si into the base metal and solids in the bonded interlayer grew epitaxially from mating base metal inward the insert metal. The number of grain boundaries formed at the bonded interlayer was corresponded with those of base metal. The liquation of grain boundary and dendrite boundary occurred at 1433K. At the bonding temperature of 1453K which is higher than liquation temperature of grain boundary, liquids of the Insert metal were connected with liquated grain boundaries and compositions in each region mixed mutually. In Joints held for various time at 1453t phases formed at liquated grain boundary far from the interface were similar to those of bonded interlayer. With prolonged holding time, liquid phases decreased gradually and liquids of continuous band shape divided many island shape. But liquid phases did not disappeared after holding for 7.2ks at 1453k. Isothermal solidification process at the bonding temperature which is higher than the liquation temperature of the grain boundary was controlled by diffusion of Ti to be result in liquation than B or Si. in insert metal. (Received January 15, 2003)

• 대한화학회지
• /
• 제37권8호
• /
• pp.730-734
• /
• 1993

비양성자성 용매인 N,N-dimethylformamide(DMF) 중에서 Biliverdin(BV)의 전기화학적인 환원거동을 직류폴라로그래프법, 순환전압전류법 및 정전위 전기량법으로 조사하였다. 또한 BV의 최종 환원생성물을 UV-Vis spectroscopy로 조사하였다. DMF 용매 중에서 BV는 -0.71 V vs. Ag/Ag$^+$와 -0.91 V vs. Ag/Ag$^+$ 에서 2개의 환원파를 보였다. 각 환원파의 전류유형은 제 1환원파는 확산지배적인 전류였으며, 제 2환원파는 반응성 전류가 약간 포함된 확산전류이었다. 그리고 제 1단계의 환원과정은 비가역적이었다. 각 환원단계에 관여하는 전자수는 1개씩 이었으며, BV은 DMF 용액 중에서 1전자 2단계의 환원과정을 거쳐서 Bilirubin으로 환원되었다.

• 분석과학
• /
• 제15권2호
• /
• pp.97-101
• /
• 2002

Co(II)착물들을 세자리 Schiff base-NOIPH, 네자리 Schiff base-$NOTDH_2$ 및 $TNBPH_4$ 로부터 합성하였으며, 이 착물들의 산화-환원 과정 mecanism을 지지 전해질로서 0.1 M TBAP를 포함한 DMF용액에서 작업전극으로 유리질 탄소전극을 사용하여 순환 전압-전류법과 펄스 차이 전압-전류법에 의해서 알아 보았다. [Co(II)$(NOIP)_2$]와 [Co(II)(NOTD)$(H_2O)_2$] 착물의 환원은 Co(III)/Co(II)의 반응이 비가역적으로 진행되고 Co(II)/Co(I)의 반응이 준가역적으로 진행되는 일전자의 2단계반응이 확산 지배적으로 일어났다. 반면에 [$Co(II)_2$(TNBP)] 착물의 환원반응은 $Co(II)_2$가 Co(II)/Co(I)로 진행되는 준가역적이며 일전자 일단계의 반응이 확산지배적으로 일어났다.