• 콘크리트학회논문집
• /
• 제29권3호
• /
• pp.307-314
• /
• 2017

콘크리트는 경제적이고 내구성을 가진 건설재료지만, 염해에 노출될 경우 내부 철근부식으로 인한 성능저하를 나타낸다. 콘크리트로 침투하는 염화물 이온은 수화물의 생성, 공극률 감소 등으로 인해 감소하게 되며, 주로 시간에 따라 감소하는 염화물 확산계수를 통하여 염화물 거동이 구현되고 있다. 본 연구에서는 고로슬래그 미분말(GGBFS: Ground Granulated Blast Furnace Slag)과 보통포틀랜트 시멘트(OPC: Ordinary Portland Cement)를 사용한 고성능 콘크리트를 대상으로 염화물 확산계수, 통과전하, 강도를 재령효과를 고려하여 평가하였다. 이를 위해 물-결합재비를 3가지 수준(0.37, 0.42, 0.47), 치환률을 3가지 수준으로 (0%, 30%, 50%)를 고려한 콘크리트를 제조하였으며, 28일 및 180일 재령에 따라 시험을 수행하였다. OPC를 사용한 콘크리트에서는 물-결합재비가 낮은 배합에서 염화물 확산이 감소하였으며, GGBFS를 50% 혼입한 배합에서는 물-결합재비가 높은 경우 염화물 확산성이 크게 감소하였다. 28일 재령에서 GGBFS 치환률이 50%인 경우 강도의 증가보다 빠르게 염화물 확산계수와 통과전하의 감소가 평가되었으며, 이는 초기재령에서도 효과적으로 염화물 침투에 저항할 수 있음을 나타낸다.

• 대한토목학회논문집
• /
• 제29권4A호
• /
• pp.347-353
• /
• 2009

콘크리트 내의 염소이온 침투에 영향을 미치는 정성적인 주요 인자로는 물-결합재비, 시멘트 종류, 재령, 주위 환경의 염소이온 농도 및 건습조건 등이 있다. 이에 따라 이 연구에서는 염소이온 확산실험을 통해 시멘트 종류 및 환경조건이 염소이온 확산특성에 미치는 영향을 조사하였다. 이를 위하여 물-결합재비 32%, 38% 및 43%에 대해서 보통 포틀랜드 시멘트(OPC), 2성분계 시멘트(BBC) 및 3성분계 시멘트(TBC) 각각을 사용한 콘크리트의 확산계수를 측정하였으며, 또한 물-결합재비 43%에 대해서 표준양생 및 해양환경에 폭로된 콘크리트의 확산계수를 측정하였다. 그 결과, 염소이온 침투 저항성은 물-결합재비가 감소함에 따라 증가하고, 2성분계 및 3성분계 시멘트를 사용한 콘크리트의 침투 저항성이 OPC 콘크리트에 비하여 우수한 것으로 나타났다. 따라서, 염해환경에 노출된 철근콘크리트 구조물의 내구수명을 증진시키기 위하여 광물질 혼화재를 혼입한 2성분계 혹은 3성분계 시멘트의 사용이 요구된다. 한편, 현장 폭로 시편의 염소이온 침투 저항성은 일정하지 않은 대기온도 하에서 염소이온의 침투, 파랑 및 건습반복의 영향으로 표준양생 시편의 경우보다 다소 저하되는 것으로 나타났다.

• Bulletin of the Korean Chemical Society
• /
• 제23권11호
• /
• pp.1579-1584
• /
• 2002

Since surfactant or emulsifiers remained on the nanoparticle surface significantly affect the physicochemical properties, the biodegradation rate, the biodistribution, and the biocompatibility of nanoparticles, surfactant-free nanoparticles should be good candidate. surfactant-free PLGA nanoparticles were successfully prepared by both the dialysis method and the solvent diffusion method. The PLGA nanoparticles prepared using the solvent diffusion method has a smaller particle size than the dialysis method. The solvent diffusion method was better for a higher loading efficiency than the dialysis method but the nanoparticle yield was lower. Testosterone (TST) release from the PLGA nanoparticles was dependent on the particle size rather than the drug contents. Testosterone release from the PLGA nanoparticles prepared by the solvent diffusion method using acetone was faster than those prepared by the dialysis method. TST release from the PLGA nanoparticles prepared by the solvent diffusion method using acetone and the dialysis method using dimethylformamide (DMF) was completed for 4 days while the PLGA nanoparticles prepared by the dialysis method using acetone showed approximately 80% TST release after 4 days. Since the PLGA nanoparticle degradation ratio was below 20% within 5 days at all samples while TST release completed within 4 days, TST release was dependent on the diffusion mechanism rather than degradation.

• Journal of Korean Vacuum Science & Technology
• /
• 제1권1호
• /
• pp.30-37
• /
• 1997

Interactions of Cu films with Si substrates separated by thin layers of molybdenum and molybdenum nitride were investigated in the viewpoint of diffusion barrier to copper. the diffusion barrier behavior of the layers was studied as functions of deposition and annealing conditions by cross-sectional transmission electron microscopy and Nomarski microscopy. the layers deposited at $N_2$ gas ratios of 0.4 and 0.5 exhibited good diffusion barrier behaviors up to $700^{\circ}C$, mainly due to the phase transformation of molybdenum to $\gamma$-Mo$_2$N phase. The increase in the N gas ratio in deposition elevates the lower limit of barrier failure temperature. Futhermore, amorphous molybdenum nitride films deposited at 20$0^{\circ}C$ and 30$0^{\circ}C$ did not fail, while the crystalline $\gamma$-Mo$_2$N films deposited at 40$0^{\circ}C$ and 50$0^{\circ}C$ showed signs of interlayer interactions between Cu and Si after annealing at 75$0^{\circ}C$ for 30 minutes. Therefore, the amorphous nature of the molybdenum nitride layer enhanced its ability to reduce Cu diffusion and its stability as a diffusion barrier at elevated temperatures.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.573-576
• /
• 2006

To predict service life of concrete structures exposed to chloride attack, surface chloride concentration, diffusion coefficient of chloride ion, and chloride corrosion threshold value in concrete, are used as important factors. of these, as the diffusion coefficient of chloride ion for concrete is strongly influenced by concrete quality and environmental conditions of structures and may significantly change the service life of structures, it is considered as the most important factor for service life prediction. The qualitative factors affecting the penetration and diffusion of chloride ion into concrete are water-binder(W/B) ratio, age, cement type and constituents, chloride ion concentration of given environment, wet and dry conditions, etc. In this paper the influence of cement type on the diffusion characteristics of chloride ion in concrete was investigated through the chloride ion diffusion test. For this purpose, the diffusion characteristics in concrete with cement type such as ordinary portland cement(OPC), binary blended cement(BBC), and ternary blended cement(TBC) were estimated for the concrete with W/B ratios of 32% and 38%, respectively. It was observed from the test that the difussion characteristics of BBC containing OPC and ground granulated blast-furnace slag was found to be most excellent of the cement type used in this study.

• 한국자기공명학회논문지
• /
• 제12권1호
• /
• pp.51-59
• /
• 2008

Convection effect in liquids has been one of the main targets to be overcome in pulsed-field-gradient NMR measurements of self-diffusion coefficients since the temperature gradient along the sample tube generated by the heating and/or cooling process causes the effect, resulting in additional diffusion. It is known that the capillary is the most appropriate tube type for diffusion experiments at variable temperatures since the narrower tube suppresses convection effectively. For evaluating the properties of hydrogen bonding, diffusion coefficients of the $K^+$-complexed and free valinomycin in a micro tube have been determined at various temperatures. From the analysis of the obtained diffusion coefficient values, we could conclude that the intramolecular hydrogen bonding in both of the $K^+$ complexed and free valinomycin in a non-polar solvent is preserved over the observed temperature range, and the temperature dependence of hydrogen bonding is more pronounced in free valinomycin. It is also thought that there is no big change in the radius of the $K^+$-complexed as temperature is varied, and the ratio of overall radius, $r_{complex}/r_{free}$ is slightly decreased as temperature rises.

• 한국기후변화학회지
• /
• 제8권2호
• /
• pp.81-89
• /
• 2017

In this study CALPUFF was used to estimate the influence of temperature rise, according to the observation value of temperature rise based RCP scenario, on meteorological elements (wind direction, wind speed, mixing height) and the change of pollutant diffusion. According to the result. applying estimated value of year 2050 temperature rise, the mixing height is increased as per the temperature rise, so the range of atmospheric diffusion is widened. In summer case, by applying temperature rise of $4^{\circ}C$ and comparing with before applying temperature rise, there was change of diffusion range as per the change of temperature between 10 AM to 11 PM. And the range of diffusion was wider than that of before temperature rise. In winter case, by applying estimated value of temperature rise, $2.3^{\circ}C$, diffusion range has been changed between 8 AM to 4 PM, showing different diffusion aspect from summer. Also, according to the result of air pollution level assessment with temperature rise, it was proved that the ratio of area with increasing air pollution level has been getting higher by increase of temperature.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제33회 KOSCO SYMPOSIUM 논문집
• /
• pp.53-59
• /
• 2006

This study is measurement of radicals in gas & light oil diffusion flame focused on burner exit. The goal of this study is to analyse the relationship between flame chemiluminescence($OH^{\ast}$, $CH^{\ast}$, $C_2^{\ast}$) intensities and flame conditions. The investigation performed turbulent diffusion flame of commercial burner in varying the excess air ratio from 1.0 to 1.8. The optical emissions were measured by photomultiplier(PMT) using optical band pass filter and spectrometer system. The effects of excess air ratio and NOx emission characteristics on the radical emission intensities were investigated experimentally.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2001년도 제22회 KOSCI SYMPOSIUM 논문집
• /
• pp.60-66
• /
• 2001

Combustion using pure oxygen instead of air is an energy saving technology that can increase thermal efficiency by the improvement of burning rate and ultra high temperature flame, being used on the industrial spot. But information about it is not so enough yet. Flame figure, temperature distribution and emission concentration were measured with oxygen excess ratio and swirl number in a turbulent diffusion flame to investigate the combustion characteristics using pure oxygen. The results showed that flame figure became different as long as oxygen excess ratio varied and that concentration of NO and CO increased suddenly around ${\lambda}$=1.5.

• 멤브레인
• /
• 제3권3호
• /
• pp.108-116
• /
• 1993

수면전개 혼합적층막의 기체투과계수는 PS의 혼합비율이 증가함에 따라, 분리계수는 PVC의 환합비율이 증가함에 따라 증가하였다. 기체투과기구는 PS의 혼합비율이 감소함에 따라 Poiseuile-Knudsen 모델에서 solution-diffusion모델로 전이하였다. 한편 혼합박막의 구조는 공기면측에 소수성의 PS가, 수면측에는 친수성인 PVC가 배향된 직렬혼합구조였으며, 기체투과거동은 series model을 따랐다.