• Journal of Life Science
• /
• v.11 no.1
• /
• pp.24-34
• /
• 2001

Methicillin Resistant Staphylococcus aureus (MRSA) was obtained from the clinical specimens at Pusan national university Hospital, Pusan, Korea. The sensitivities against various antibiotics were examined by using disc diffusion test and associated genes such as mecA, mecR1, mecI and femA were detected by polymerase chain reaction. Among Seventy-nine strains of MRSA, 38 strains(48.1%)were sensitive to streptomycin and 32 strains(40.5%) to cefoperazone, while one strain(1.3%) were resistant to vancomycin. In considering the result of this study, 7 strains showed resistance to 9 kinds of different antibiotics, 12 strains were to 8 kinds, 24 strains were to 7,25 strains were to 6, 9 strains were to 5, and 2 strains were to 4 antibiotics. Among 79 strains of MRSA, 67 strains were coagulase positive and 12 were coagulase negative. In the detection of MRSA associated genes by PCR method, mecA, mecR1, mecI, and femA genes were detected in 30 strains(44.8%), 28 strains(41.8%), 23 strains(34.3%) and 15 strains(22.4%), respectively. MecA type that is without femA were found in 21 strains(31.3%), femA type that is without regulator genes were shown in 4 strains(6.0%), while mecA-mecR1-mecI type with regulator genes were shown more to be 17 strains(25.4%). There was little statistical significance between multidrug resistance and MRSA associated genes. Considering these result, it is necessary to include moecular biological studies of related genes to the study drug resistance.

• The Journal of the Korean Society for Microbiology
• /
• v.19 no.1
• /
• pp.55-64
• /
• 1984

The clinical specimens used in this study were collected during the period from March 4, to December 30, 1983, from children's hospitals in Seoul area. They came from clinically apparent cases of diarrheal disease in hospitals. Many specimens were taken from rectal Swabs. During this period, 2166 stool cultures were streaked onto MacConkey plate and were them deposited in selenite broth. Colonies resembling pathogens on MacConkey medium were picked to KIA, Urea agar, malonate broth, ONPG broth, SIM. Reaction on those media cultures were identified biochemically with using API 20E test kit and confirmed serologically with commercially avabile Salmonella antisera(Difco) or Shigella antisera(Denka, Japan). The sensitivity of Salmonella and Shigella tested to ampicillin cephalosporin, chloramphenicol, colistin, gentamicin, tetracycline, streptomycin, nalidixic acid, neomycin, polymyxin B was performed by means of disc diffusion method recommended by Bauer-Kirby, using the discs prepared in BBL Laboratory. 1. There were 34 (1.6%) isolations of Salmonella cultures and 52(2.4%) isolations of Shigella from the 2,116 specimens. Only 53%of Salmonella were isolated by direct streaking on MacConkey plating media, by contrast, 80% of the Shigella were isolated directly. 2. Shigella flexneri types comprised 56% of the Shigellae isolate from 52 Shigellae identified 24% of Salmonella enteritidis ser typhimurium were identified. 3. Concerning to Salmonella and Shigella occurance according to month and sex, They shows relatively higher for the male than in case of female, and 2-3 age were shown the highest group. 4. October is the month with highest incidences. 5. In the sensitivity patterns of Shigellae, most of them were appeared to be resistant ampicillin, streptomycin, tetracycline, in case of Salmonella, 15% of them were resistant to chloramphenicol.

• Parasites, Hosts and Diseases
• /
• v.23 no.2
• /
• pp.247-252
• /
• 1985

In the present study, the effect of primary infection to reinfection with Ascaris suum larvae was experimented in mouse model. Mice were challenged with 1,000 infective stage eggs of Ascaris suum. The embryonated eggs were directly introduced into stomach of mice. Reinfection was performed at 50 days after the primary infection with same method as primary infection. Mice were sacrificed 3, 5, 7, 10, 15 and 20 days after infection in both groups respectively. Larvae collected from livers and lungs with Baermann's apparatus were enumerated and measured after sacrifice. Sera of mice were also collected at same time. The results of the experiment were as follows: With antigen prepared from coelomic fluid of adult Ascaris suum and sera collected from mice before reinfection, the production of antibody in experimental mice was confirmed by the gel-diffusion technique. In the livers of reinfected mice, the larvae were recovered up to 10 days after challenge, otherwhile in the primary infected mice, the larvae were observed up to 7 days. The maximum number of larvae were observed in the lungs of primary infected mice on 10 days after inoculation. In the lungs of reinfected mice, maximum number of larvae were recovered on 7 days after, only few larvae were recovered on 10 days after reinfection. As regards the growth of the larvae, the third stage larvae, over $500{\mu\textrm{m}}$ in length, appeared in livers at 5 days after reinfection, but it couldn't be found on 7 days and 10 days after challenge. The third stage larvae continuously developed were observed in lungs of mice from 5 days after reinfection. In conclusion, it was found that development of larvae in livers of immune mice were probably repressed by the immune mechanisms being rises in livers and defence mechanism is also acting by interfering with the process of larval penetration into the lung from the liver.

• Clean Technology
• /
• v.18 no.3
• /
• pp.312-319
• /
• 2012

Malachite green is used a dye but malachite green is harmful toxic substance. In this study, the adsorption characteristics of zeolite has been investigated for the adsorption of malachite green dissolved in water. The effects of initial dye concentration, contact time, pH and temperature on adsorption of malachite green by a fixed amount of zeolite have been studied in batch adsorber and fixed bed. The adsorption equilibrium data are successfully fitted to the Freundlich isotherm equation in the temperature range from 25 to $45^{\circ}C$. The estimated values of k and ${\beta}$ are 23.60-46.88, 0.225-0.347, respectively. The mechanism of the adsorption process was determined from the intraparticle diffusion model. The effects of the operation conditions of the fixed bed on the breakthrough curve were investigated. When the inlet concentration and initial flow rate of malachite green are increased, the corresponding adsorption breaktime appears to decrease. Breaktime increased with increasing bed height and length of adsorption zone showed similar patterns.

• Korean Journal of Veterinary Research
• /
• v.40 no.2
• /
• pp.325-332
• /
• 2000

The growth characteristics and the cellular protein patterns of the Lactobacillus plantarum isolated and identified from oat silage were examined in order to confirm whether it will be used practically as probiotics or not. L plantarum was identified by morphological and biochemical tests including of final conforming by API 50CHL kit. The cultivation in MRS broth of the strain under the condition of different temperature, proved that they grew into $2.0{\times}10^{9}$ in $25^{\circ}C$, into $1.4{\times}10^{9}$ in $35^{\circ}C$ but they decreased into $4.5{\times}10^{5}$ growth in $45^{\circ}C$. The comparison of the growth by measurement of O.D600nm value after 24 hour cultivation between L plantarum and commercial probiotics, showed that the strain had a higher growth than commercial as 1.841 : 1.623. The measurement of it under bile acid's existence, indicated that this isolation was not influenced by bile acid and the tolerance was $3.2{\times}10^{9}$, $3.9{\times}10^{9}$ and $3.2{\times}10^{9}$, respectively, when each of 0%, 1%, and 2% oxigall existed. The examination of their antibiotics susceptibility by disk diffusion test, proved that L plantarum showed resistance against danofloxacin(5mcg), gentamycin(10mcg), kanamycin(30mcg), neomycin(30mcg) and streptomycin(10mcg). Based upon the test of the bacteriocin formation of this L plantarum, it was found out that the inhibition zone was not formed. In growth of L plantarum and E coli in nutrient broth, all E coli died out within 6 hours after cultures.

• Journal of Life Science
• /
• v.18 no.1
• /
• pp.69-74
• /
• 2008

This study carried out to investigate the antimicrobial resistance and biochemical characteristics of Staphylococcus aureus (S. aureus) isolated from reproductive and respiratory tract in Thoroughbred horse. The specimens were collected from equine vaginal mucosa and upper respiratory tract from March to December 2006 using a culture swab in Korea. S. aureus suspected colonies on blood agar plates were selected and identified as standard biochemical tests and PCR (Applied Biosystems, USA). Antimicrobial resistance test of S. aureus isolates was performed with 30 antimicrobial agents (BBL, USA) by using the agar disk diffusion method. S. aureus isolates were isolated 58 (39.2%) strains of 148 samples: wound 64.7% (11/17), genital discharge 37.0% (37/100) and nasal discharge 32.2% (10/31). Almost isolates showed high resistance to spectinomycin, sulfonamides, erythromycin, tetracyelin, ciprofloxacin and penicillin. These results may provide the basic information to establish strategies for treatment and prevention of reproductive and respiratory disease in Thoroughbred horses in Korea.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.2 s.35
• /
• pp.129-134
• /
• 2005

Electroplating copper is the important role in formation of 3D stacking interconnection in SiP (System in Package). The I-V characteristics curves are investigated at different electrolyte conditions. Inhibitor and accelerator are used simultaneously to investigate the effects of additives. Three different sizes of via are tested. All via were prepared with RIE (reactive ion etching) method. Via's diameter are 50, 75, $100{\mu}m$ and the height is $100{\mu}m$. Inside via, Ta was deposited for diffusion barrier and Cu was deposited fer seed layer using magnetron sputtering method. DC, pulse and pulse revere current are used in this study. With DC, via cannot be filled without defects. Pulse plating can improve the filling patterns however it cannot completely filled copper without defects. Via was filled completely without defects using pulse-reverse electroplating method.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.12
• /
• pp.72-82
• /
• 2014

Recently, the size of semiconductor industry market is constantly growing, due to the increase in diffusion of smart-phone, tablet PC and SSD(Solid State Drive). Also, it is expected that the demand for TLC NAND-type flash memory would gradually increase, with the recent release of TLC NAND-type flash memory in the SSD market. There have been a lot of studies on SLC NAND flash memory, but no research on TLC NAND flash memory has been conducted, yet. Also, a test of NAND-type flash memory is depending on a high-priced external equipment. Therefore, this study aims to suggest a structure for an autonomous test with no high-priced external test device by modifying the existing SLC NAND flash memory and MLC NAND flash memory test algorithms and patterns and applying them to TLC NAND flash memory.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.10
• /
• pp.1053-1060
• /
• 2011

This study is performed to determine the drug concentration profiles of drug-eluting stents (DES) for an ideal circular ring stent and intertwined stent models for various Reynolds numbers (Re = 200, 400, and 800). The Navier.Stokes equations coupled with the advection-diffusion equation are solved numerically in order to determine how the flow patterns and drug deposition are affected in the in-stent and post-stent regions where flow separation and recirculation occur. The presence of DES within the arterial segment affects the local drug distribution in the flow field. As a result, the drug concentration for the intertwined stent is higher over the in-stent region in comparison with the ideal stents. For a given stent geometry, the local drug concentration in the in-stent region decreases with Reynolds number, while for a given Reynolds number, the local drug concentration is relatively insensitive to the stent geometry. The results show that drug concentration along the arterial wall is significantly higher within the in-stent and post-stent regions for the intertwined stent geometry than for the ideal stent geometries.

• Korean Journal of Materials Research
• /
• v.14 no.5
• /
• pp.305-309
• /
• 2004

Mechanical alloying (MA) of Ti-25.0～37.5at%Si powders was carried out in a high-energy ball mill, and in situ thermal analysis was also made during MA. In order to classify the synthesis behavior of the powders with respect to at%Si, the synthesis behavior during MA was investigated by in situ thermal analysis and X-ray diffraction (XRD). In situ thermal analysis curves and XRD patterns of Ti-25.0～26.1at%Si powders showed that there were no peaks during MA, indicating $Ti_{5}$ $Si_3$ was synthesised by a slow reaction of solid state diffusion. Those of Ti-27.1～37.5at%Si powders, however, showed that there were exothermic peaks during MA, indicating $_Ti{5}$ $Si_3$ and$ Ti_3$Si phase formation by a rapid exothermic reaction of self-propagating high-temperature synthesis (SHS). For Ti-27.1～37.5at%Si powders, the critical milling times for SHS decreased from 38.1 to 18.5 min and the temperature rise, ΔT (= peak temperature - onset temperature) increased form $19.5^{\circ}C$ to $26.7^{\circ}C$ as at%Si increased. The critical composition of Si for SHS reaction was found to be 27.1at% and the critical value of the negative heat of formation of Ti-27.1at%Si to be -1.32 kJ/g.