• 제목/요약/키워드: Diffusion Flame

검색결과 558건 처리시간 0.024초

유전체 방전을 이용한 확산화염에서의 매연저감 특성 (Soot Reduction in Diffusion Flames Using Dielectric Barrier Discharge)

  • 차민석;김관태;정석호;이상민
    • 한국연소학회:학술대회논문집
    • /
    • 대한연소학회 2003년도 제27회 KOSCO SYMPOSIUM 논문집
    • /
    • pp.27-32
    • /
    • 2003
  • The effect of non-thermal plasma on diffusion flames in co-flow jets has been studied experimentally by adopting a dielectric barrier discharge technique. The generation of streamers was enhanced with a flame due to increased reduced electric fields by high temperature burnt gas and the abundance of ions in the flame region. The effect of streamers on flame behavior reveals that the flame length was significantly decreased as the applied voltage increased and the yellow luminosity by the radiation of soot particles was also significantly reduced. The formation of PAH and soot was influenced appreciably by the non-thermal plasma, while the flame temperature and the concentration of major species were not influence much with the plasma generation. The results demonstrated that the application of non-thermal plasma can be a viable technique in controlling soot generation in flames with low power consumption in the order of 1 W.

  • PDF

희박연소에서 발생하는 메탄의 농도 상호작용과 삼중화염에 대한 연구 (Concentration Interaction of Premixed and Triple-layer Flames in Lean Burn with Methane Fuel)

  • 오태균;정석호
    • 한국자동차공학회논문집
    • /
    • 제14권6호
    • /
    • pp.171-178
    • /
    • 2006
  • The performance in the practical combustion system including reciprocating engines and gas turbine combustors is being much governed by turbulent reacting flow that is often analyzed by both a laminar flamelets concept and flame interaction. The characteristics of laminar flame interaction have been investigated numerically to provide basic understanding of wrinkled turbulent flames under concentration interaction resulting from inhomogeneity in fuel-air mixing, especially focused on the transition of flame characteristics such as diffusion flame, partially premixed diffusion flame, and triple-layer flame by the variation in the degree of premixedness. The extinction stretch rates to the premixedness have also been obtained in this paper. The boundary defining the regime of the existence of triple-layer flames as functions of both stretch rate and premixedness has been determined which agrees well with previously reported experiment measuring OH radical concentration peaks based on PLIF.

과농-희박 예혼합화염의 상호작용에 관한 연구 (On the interaction of rich-lean premixed flames)

  • 이충훈;정석호
    • 대한기계학회논문집
    • /
    • 제11권6호
    • /
    • pp.991-1000
    • /
    • 1987
  • 본 연구에서는 과농-희박 연료장에서 화염들의 상호작용에 관하여 이론적 해 석 및 실험적 검증을 통해 연구하였고, 이 중 특히 두 개의 예혼합화염 사이에 확산화 염이 형성되어 세 개의 화염이 존재하는 영역을 고찰하였다.

동층류 축대칭 확산화염내의 화염구조 및 매연입자 분포의 예측 (Predictions on the Flame Structure and Soot Distribution in the Coflowing Laminar Diffusion Flames)

  • 이정기;김상수
    • 대한기계학회논문집
    • /
    • 제16권8호
    • /
    • pp.1583-1594
    • /
    • 1992
  • 본 연구에서는 동층류 축대칭 확산화염에서 이전까지의 화염해석 방법들을 면 밀히 고찰하여 층류 확산화염 방식의 연소문제를 해결하는데 있어서 접근이 용이하고 타당성을 가지는 화염해석 방법을 찾아내는데 있으며 매연 입자에 관한 생성및 산화모 델을 총체적으로 연결하여 실험결과와의 비교를 통해 적절한 모델인수를 결정하며 복 사효과와 열영동효과를 고려하여 화염해석과 화염내의 매연입자의 분포를 예측하는데 있다.

반밀폐 연소공간 내 동축관 형상에 따른 DME-공기 확산화염의 안정화 특성 (Stabilization Characteristics of DME-Air Diffusion Flames Depending on the Configuration of the Fuel-Air Tubes in Half Closed Combustion Spaces)

  • 김고태;김남일
    • 대한기계학회논문집B
    • /
    • 제33권11호
    • /
    • pp.916-923
    • /
    • 2009
  • The effects of configuration of fuel and air tubes on the flame stabilization were experimentally investigated in half-closed combustors. Flame behaviors and stabilities of methane, propane, and DME flames were compared by changing tube diameters and the locations of the fuel and air tubes. It was found that flammability limits are significantly affected by the outlet boundary condition, which disturbs compositions of burned and unburned mixtures near the flame base. And it was found that there exist critical inner tube heights, over which flame stability is determined only by the fuel flow rate. Conclusively, flame stabilization is governed by the flame propagation velocity in an ordinary mixing flow and the non-uniform mixture concentration in the combustion space which is affected by flow recirculation and the combustor configuration. The compositions of $NO_x$ and CO were compared to know basic characteristics of methane, propane, and DME flames.

고압하에서 수소 확산화염의 소염에 미치는 복사 열손실 효과에 관한 수치적 연구 (A Numerical Study on Effect of Radiative Heat Loss on Extinction of Hydrogen Diffusion Flames at High Pressure)

  • 오태균;손채훈
    • 대한기계학회논문집B
    • /
    • 제32권5호
    • /
    • pp.351-358
    • /
    • 2008
  • Extinction characteristics of hydrogen-air diffusion flames at various pressures are investigated numerically by adopting counterflow flame configuration as a model flamelet. Especially, effect of radiative heat loss on flame extinction is emphasized. Only gas-phase radiation is considered here and it is assumed that $H_2O$ is the only radiating species. Radiation term depends on flame thickness, temperature, $H_2O$ concentration, and pressure. From the calculated flame structures at various pressures, flame thickness decreases with pressure, but its gradient decreases at high pressure. Flame temperature and mole fraction of $H_2O$ increase slightly with pressure. Accordingly, as pressure increases, radiative heat loss becomes dominant. When radiative heat loss is considered, radiation-induced extinction is observed at low strain rate in addition to transport-induced extinction. As pressure increases, flammable region, where flame is sustained, shifts to the high-temperature region and then, shrunk to the point on the coordinate plane of flame temperature and strain rate. The present numerical results show that radiative heat loss can reduce the operating range of a combustor significantly.

스월 동축형 인젝터에 의해 형성되는 메탄-산소 확산화염의 연소특성 (Combustion Characteristics of Methane-Oxygen Diffusion Flame Formed by Swirl-coaxial Injector)

  • 배성훈;홍준열;김희동;김정수
    • 한국추진공학회지
    • /
    • 제21권2호
    • /
    • pp.1-8
    • /
    • 2017
  • 본 연구에서는 모델연소실 내부 메탄-산소 확산화염의 연소특성을 분석하기 위해 추진제의 다양한 분사조건에서 연소실험을 수행하여 연소안정한계 측정 및 화염의 형상변이를 관찰하였다. 연구 결과, 추진제가 이론당량비 조건으로 접근할수록 높은 산소 Reynolds 수($Re_o$) 구간에서도 안정적인 부상화염이 관찰되었으며, 가시화염의 길이는 증가하고, 부상높이는 감소하는 경향이 나타났다. 스월 동축형 인젝터에 의한 추진제의 스월효과로 인해 폭이 넓고, 길이가 짧은 화염이 생성되어 연소실 크기가 제한적인 추력기에서의 사용이 적합함을 확인하였다.

대향류 확산화염에 대한 직접수치모사의 검증 (An Evaluation of a Direct Numerical Simulation for Counterflow Diffusion Flames)

  • 박외철
    • 한국안전학회지
    • /
    • 제16권4호
    • /
    • pp.74-81
    • /
    • 2001
  • A direct numerical simulation (DNS) was applied to nonpremixed counter-flow diffusion flames between oxidizer and fuel ducts. The objective of this study is to evaluate the numerical method for simulation of axisymmetric counterflow diffusion flames. Effects of computational domain size and grid size were scrutinized, and then the method was applied to air-methane diffusion flames. The results at zero gravity conditions were in good agreement with those obtained by the one-dimension flame code OPPDIF. It was confirmed thai the numerical method is applicable to the diffusion flames at the normal gravity conditions since the results clearly showed the effects of buoyancy and velocity ratio.

  • PDF

Sooting 및 Non-Sooting 정상 확산 화염에서 생성되는 매연 입자의 특성에 대한 연구 (Characterization of Soot Particles Generated in Non-sooting and Sooting Normal Diffusion Flames)

  • 최인철;이재복;황정호
    • 대한기계학회논문집B
    • /
    • 제24권7호
    • /
    • pp.984-993
    • /
    • 2000
  • Characteristics of carbon soot particles generated in diffusion flames were studied. Non-sooting and sooting normal diffusion flames using propane or ethylene as fuel were selected. In the flames, soot volume fraction was measured by a thermocouple, and primary particle diameter and cluster size were analyzed by TEM photographs. The characteristics of soot particles depended on flame(non-sooting or sooting) and fuel(propane or ethylene) type. Unlike the sooting diffusion flames, particle growth and oxidation processes were clearly observed in the non-sooting diffusion flames. In the sooting diffusion flames, soot particle size was slightly changed at the flame tip.