• 제목/요약/키워드: Diffusion Equation

검색결과 895건 처리시간 0.031초

나노유체를 이용한 평판형 태양열 집열기의 효율에 관한 연구 (Study on Efficiency of Flat-Plate Solar Collector Using Nanofluids)

  • 이승현;장석필
    • 대한기계학회논문집B
    • /
    • 제37권9호
    • /
    • pp.799-805
    • /
    • 2013
  • 본 논문에서는 나노유체를 사용한 평판형 집열기의 효율을 예측하기 위한 이론적인 연구를 수행하였다. 평판형 태양열 집열기 내부의 온도분포에 관한 해석적 해를 구하기 위해 무차원화된 2 차원 열 확산방정식을 풀었으며, 이 과정에서 흡광계수와 복사강도는 파장에 독립적이라고 가정하였다. 이렇게 주어진 식을 바탕으로, 물-기반 단일벽 탄소나노혼 나노유체를 작동유체로 사용할 경우 나노입자의 부피비, 열손실의 크기, 집열기의 높이에 따른 무차원 온도분포를 파악해 보았다. 마지막으로 나노유체 기반 평판형 집열기의 효율을 예측해 본 결과 일정 형상조건 이내에서 나노유체 태양열 집열기가 기존 집열기 보다 높은 효율을 가질 수 있음을 파악하였다.

미세혈관 문합 후 순환계 질환 개선을 위한 원적외선 치료기의 열적 특성 평가 (Evaluation of Thermal Properties for the Far Infrared Therapy After Microvascular Anastomosis for the Treatment of Circulatory Diseases)

  • 양영규;오승현;김철웅
    • 대한기계학회논문집 C: 기술과 교육
    • /
    • 제1권2호
    • /
    • pp.179-186
    • /
    • 2013
  • 혈액순환촉진, 심혈관계치료, 피부질환, 암세포억제 등의 의료분야에 원적외선 치료법이 광범위하게 활용되고 있다. 본 연구에서는 원적외선 치료에 효과적인 패널형 방사체의 발열부에 대한 열적 특성을 실험적으로 분석하였다. 발열선은 정상상태에서 절연피복에 $150mW/m^2$의 열유속으로 열에너지를 공급하여 절연피복은 발열선 온도의 20%에 도달하였다. 단열막 사용은 약 20%의 발열판 표면온도 증가효과가 있었으며 열시상수를 상승시켜 혈액순환촉진에 크게 기여하는 것으로 나타났다. 발열선의 배치간격이 발열부 설계에 중요한 인자이며 열확산의 중첩을 위해 발열판의 열전도계수와 밀도를 고려해야함을 알 수 있었다.

Buongiorno의 비균질 모델을 사용한 나노유체의 층류 자연대류 해석 (COMPUTATION OF LAMINAR NATURAL CONVECTION OF NANOFLUID USING BUONGIORNO'S NONHOMOGENEOUS MODEL)

  • 최석기;김성오;이태호
    • 한국전산유체공학회지
    • /
    • 제18권4호
    • /
    • pp.25-34
    • /
    • 2013
  • A numerical study of a laminar natural convection of the CuO-water nanofluid in a square cavity using the Buongiorno's nonhomogeneous model is presented. All the governing equations including the volume fraction equation are discretized on a cell-centered, non-uniform grid employing the finite-volume method with a primitive variable formulation. Calculations are performed over a range of Rayleigh numbers and volume fractions of the nanopartile. From the computed results, it is shown that both the homogeneous and nonhomogeneous models predict the deterioration of the natural convection heat transfer well with an increase of the volume fraction of nanoparticle at the same Rayleigh number, which was observed in the previous experimental studies. It is also shown that the differences in the computed results of the average Nusselt number at the wall between the homogeneous and nonhomogeneous models are very small, and this indicates that the slip mechanism of the Brown diffusion and thermophoresis effects are negligible in the laminar natural convection of the nanofluid. The degradation of the heat transfer with an increase of the volume fraction of the nanoparticle in the natural convection of nanofluid is due to the increase of the viscosity and the decrease of the thermal expansion coefficient and the specific heat. It is clarified in the present study that the previous controversies between the numerical and experimental studies are owing to the different definitions of the Nusselt number.

규모문제를 고려한 수문응답의 해석 : 1. 모형이론의 유도 (Hydrologic Response Analysis Considering the Scale Problem : Part 1. Derivation of the Model)

  • 성기원;선우중호
    • 물과 미래
    • /
    • 제28권4호
    • /
    • pp.185-194
    • /
    • 1995
  • 강우-유출모형의 유도와 적용에 고려되야할 규모문제를 검토하여 모형의 지형매개변수와 해상도간의 관계를 분석하고자 한다. 일반적으로 지형인자들의 측정과 계산은 주어진 정보의 해상도에 의존하며 또한 민감하다. 따라서 지형인자를 적용하는 강우-유출 모형은 분석에 이용한 해상도의 영향을 반영할 수 있어야 한다. 본 연구에서 유도된 강우-유출모형은 규모문제가 고려될 수 있는 GIUH 모형으로 이 모형은 유역의 수문응답을 하도망응답과 사면응답으로 분리하여 모의한다. 하도망응답의 계산은 선형화된 St. Venant 식으로부터 유도한 확산근사법을 이용하였고 사면응답은 2모수 gamma 분포식을 사용하였다. 하도망의 지형적 특성과 응답의 초기분포는 폭함수에 의하여 나타내어진다. 본 연구에서는 규모문제를 고려하여 Fractal 이론 및 Melton의 지형법식을 이용하여 폭함수를 유도한국였고 이를 유원위치함수를 이용하여 가중치를 부가하였다.

  • PDF

Fundamentals of Particle Fouling in Membrane Processes

  • Bhattacharjee Subir;Hong Seungkwan
    • Korean Membrane Journal
    • /
    • 제7권1호
    • /
    • pp.1-18
    • /
    • 2005
  • The permeate flux decline due to membrane fouling can be addressed using a variety of theoretical stand-points. Judicious selection of an appropriate theory is a key toward successful prediction of the permeate flux. The essential criterion f3r such a decision appears to be a detailed characterization of the feed solution and membrane properties. Modem theories are capable of accurately predicting several properties of colloidal systems that are important in membrane separation processes from fundamental information pertaining to the particle size, charge, and solution ionic strength. Based on such information, it is relatively straight-forward to determine the properties of the concentrated colloidal dispersion in a polarized layer or the cake layer properties. Incorporation of such information in the framework of the standard theories of membrane filtration, namely, the convective diffusion equation coupled with an appropriate permeate transport model, can lead to reasonably accurate prediction of the permeate flux due to colloidal fouling. The schematic of the essential approach has been delineated in Figure 5. The modern approaches based on appropriate cell models appear to predict the permeate flux behavior in crossflow membrane filtration processes quite accurately without invoking novel theoretical descriptions of particle back transport mechanisms or depending on adjust-able parameters. Such agreements have been observed for a wide range of particle size ranging from small proteins like BSA (diameter ${\~}$6 nm) to latex suspensions (diameter ${\~}1\;{\mu}m$). There we, however, several areas that need further exploration. Some of these include: 1) A clear mechanistic description of the cake formation mechanisms that clearly identifies the disorder to order transition point in different colloidal systems. 2) Determining the structure of a cake layer based on the interparticle and hydrodynamic interactions instead of assuming a fixed geometrical structure on the basis of cell models. 3) Performing well controlled experiments where the cake deposition mechanism can be observed for small colloidal particles (< $1\;{\mu}m$). 4) A clear mechanistic description of the critical operating conditions (for instance, critical pressure) which can minimize the propensity of colloidal membrane fluting. 5) Developing theoretical approaches to account for polydisperse systems that can render the models capable of handing realistic feed solutions typically encountered in diverse applications of membrane filtration.

기술수용모델을 이용한 초기이용자들의 가상현실기기 채택 행동 연구 (Extended Technology Acceptance Model of VR Head-Mounted Display in Early Stage of Diffusion)

  • 장한진;노기영
    • 디지털융복합연구
    • /
    • 제15권5호
    • /
    • pp.353-361
    • /
    • 2017
  • HMD와 같은 가상현실기기는 현실에서 제한된 실제 환경을 가상의 환경으로 좀 더 유연하게 유도해 낼 수 있는 환경을 제공하며, 기술적 요인과 더불어 이용자의 경험과 특성을 중요시 한다. 이에 따라 본 연구는 가상현실기기에 대하여 기술수용모델을 적용한 확장된 기술수용모델 관점에서 정보품질, 유희성, 자기효능감이 가상현실기기의 수용의향에 영향을 미치는 요인들을 파악하였다. 연구결과 정보품질, 유희성은 기술수용모델의 선행변인인 사용용이성과 유용성에 영향을 미쳤으며, 자기효능감은 사용용이성에 영향을 미치고 있음이 확인되었다. 그리고 사용용이성과 유용성은 가상현실기기의 이용의도에 영향을 미치고 있음이 확인되었다.

육계의 혈청중 면역글로부린(IgA, IgG, IgM)농도의 발육시기별 변화상 - III. IgM 분리 및 발육시기별 농도수준 (Developmental Changes of Serum IgA, IgG and IgM Concentrations in Broiler Chicks - III. Isolation of IgM and Developmental Changes of Serum IgM Levels)

  • 김정우;이민호;김춘수;김상희;박근식
    • 한국가금학회지
    • /
    • 제21권3호
    • /
    • pp.175-182
    • /
    • 1994
  • An experiment was conducted to establish a large scale production method of anti-serum against chicken IgM and to profile the developmental changes of serum IgM levels during the feeding period(from hatching to 7 weeks of age) in broiler chicks. Blood samples were taken from Hubbard chicken at the age of hatching, three days of age, and weekly thereafter till to 7 weeks of age. The pure IgM was isolated from ammonium sulfate treated chicken serum by both sephadex G-200 and sepharose CL-6B chromatography. The breaking-through peak containing IgM appeared from the fraction 26 to 28. These fractions consisted mainly of IgM when tested by anti-chicken IgM(Nordic, Netherlands). Immunized with the heavy chain of this purified IgM, the rabbit immune sera(anti-chicken IgM) were formed a reaction only with the purified chicken IgM. The quantitative assay of serum IgM were carried by RID method. The optimal time for diffusion was 14 hours and the coefficient of determination($R^{2}$) for regression equation of standard curve was 0.992. It was observed that IgM concentrations were the highest at hatching(3.23 mg /mL), after that decreased gradually. From 2 to 5 weeks of age the levels unchanged(2.0 ~ 2.3mg /mL), and gradually decreased to 7 weeks of age(1.3 mg /mL).

  • PDF

점착성 퇴적물의 침전 특성 분석 (Analysis of Characteristics of Cohesive Sediment Settling)

  • 김종우;윤세의;이종태
    • 한국수자원학회논문집
    • /
    • 제38권2호
    • /
    • pp.133-142
    • /
    • 2005
  • 미세하게 부유된 입자(alumina(Al$_2$O$_3$), quartz(SiO$_2$))의 침전 농도를 물리-화학적(초기농도, pH, NaCl)인 영향을 고려하면서 연구하였다. 침강실험은 입자사이의 끌어당기는 힘 때문에 Flocculation(플록 형성)이 일으키는 초기농도와 NaCl의 증가가 중요한 영향을 미치며, 더욱이 미립자(alumina(Al$_2$O$_3$))의 농도-시간 곡선에 pH의 영향이 매우 큼을 보였다. 또한 정지수면 조건하에서 미립자의 침전 거동예측을 위한 수치 모델은 부정류 1차원 이송방정식에 의해 분석되었으며 양해법, 음해법, Crank-Nicolson 기법 및 유한차분법을 이용하였다. 수치모델은 평형을 이룬 농도변화까지 예측하였으며, 실험치의 비교분석을 통해 중앙차분법을 통한 Implicit 모형의 계산이 대체로 일치하였다.

Predictive Thin Layer Drying Model for White and Black Beans

  • Kim, Hoon;Han, Jae-Woong
    • Journal of Biosystems Engineering
    • /
    • 제42권3호
    • /
    • pp.190-198
    • /
    • 2017
  • Purpose: A thin-layer drying equation was developed to analyze the drying processes of soybeans (white and black beans) and investigate drying conditions by verifying the suitability of existing grain drying equations. Methods: The drying rates of domestic soybeans were measured in a drying experiment using air at a constant temperature and humidity. The drying rate of soybeans was measured at two temperatures, 50 and $60^{\circ}C$, and three relative humidities, 30, 40 and 50%. Experimental constants were determined for the selected thin layer drying models (Lewis, Page, Thompson, and moisture diffusion models), which are widely used for predicting the moisture contents of grains, and the suitability of these models was compared. The suitability of each of the four drying equations was verified using their predicted values for white beans as well as the determination coefficient ($R^2$) and the root mean square error (RMSE) of the experiment results. Results: It was found that the Thompson model was the most suitable for white beans with a $R^2$ of 0.97 or greater and RMSE of 0.0508 or less. The Thompson model was also found to be the most suitable for black beans, with a $R^2$ of 0.97 or greater and an RMSE of 0.0308 or less. Conclusions: The Thompson model was the most appropriate prediction drying model for white and black beans. Empirical constants for the Thompson model were developed in accordance with the conditions of drying temperature and relative humidity.

제올라이트에 의한 말라카이트 그린의 흡착특성 (Adsorption Characteristics of Malachite Green on Zeolite)

  • 이종집;엄명헌
    • 청정기술
    • /
    • 제18권3호
    • /
    • pp.312-319
    • /
    • 2012
  • 말라카이트 그린은 염료로 사용되지만 유해한 독성 물질이다. 본 연구에서는 제올라이트에 의한 말라카이트 그린의 흡착특성을 조사하였다. 일정한 양의 제올라이트에 대해 초기농도, 접촉시간, pH 및 흡착온도 등이 말라카이트 그린의 흡착에 미치는 영향을 회분식 및 칼럼흡착실험을 통하여 연구하였다. 회분식흡착실험을 통해 흡착등온선을 구한 결과 말라카이트 그린의 흡착평형관계는 $25{\sim}45^{\circ}C$ 범위에서 Freundlich 식이 잘 적용되었다. 흡착등온식으로 부터 평가된 k와 ${\beta}$ 값은 각각 23.60~46.88, 0.225~0.347이었다. 입자내 확산모델을 사용하여 흡착기구를 결정하였다. 고정층의 운전조건이 파과곡선에 미치는 영향을 조사하였다. 말라카이트 그린의 유입농도와 초기유속이 증가함에 따라 파과시간은 감소하였다. 층높이가 증가함에 따라 파과시간이 증가하였는데, 흡착대의 길이는 비슷한 양상을 나타냈다.