• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.833-836
• /
• 2000

The mechanical and thermal load. and thermal softening which is happened by the high temperature of die, in hot and warm forging, cause wear. heat checking and plastic deformation, etc. This study is for the effects of solid lubricants and surface treatments for warm forging die Because cooling effect and low friction are essential to the long lift of dies. optimal surface treatments and lubricants are very important to hot and warm forging Process. The heat that is generated by repeated forging processes. and its transfer are important factors to affect die life. The main factors, which affect die hardness and heat transfer, are surface treatments and lubricants, which are related to thermal diffusion coefficient and heat transfer coefficient, etc. For verifying these. experiments art performed for diffusion coefficient and heat transfer coefficient in various conditions - different initial billet temperatures and different loads. Carbonitriding and ionitriding are used as surface treatments. and oil- base and water-base graphite lubrirants are used. The effects of lubricant and surface treatment for warm forging die lift are explained by their thermal characteristics.

• 호남수학학술지
• /
• 제32권2호
• /
• pp.193-202
• /
• 2010

We investigate the estimation of the moisture transfer coefficients in porous media by optimization technique which minimizes the functional defined by the squares error of the numerical solution of an inverse diffusion problem from their experimental values of the moisture content at the some time-steps. In this paper, we solve a diffusion equation numerically by the control volume finite element methods.

• 분석과학
• /
• 제9권3호
• /
• pp.292-301
• /
• 1996

산화환원반응 탐침제로, poly ether 꼬리가 결합된 Cobalt(II)bipyridine 착물을 합성 하였고, 이들 화합물의 느린 확산계수와 불균일 전자이동을 설명하였다. $Co(bpy(ppgm)_2)_{3^-}(ClO_4)_2$에 전해질 $LiClO_4$가 혼합된 neat 상태의 산화반응에 대한 확산계수는 $1.5{\times}10^{-15}cm^2/s$ 였다. 이 화합물들의 불균일 전자이동 속도상수들은 확산계수와 관련이 있었다. 확산계수의 감소에 따라 속도상수(k)의 감소가 일어났다. 강한 이온쌍을 형성하는 $ClO{_4}^-$의 화합물은 약한 이온 쌍을 형성하는 $CF_3COO^-$ 화합물보다 확산계수가 훨씬 작았다.

• Korean Chemical Engineering Research
• /
• 제56권3호
• /
• pp.430-434
• /
• 2018

본 연구에서는 잔류 메틸렌 클로라이드 제거를 위한 마이크로웨이브를 이용한 파클리탁셀 건조에서 유효확산계수 및 물질전달계수를 조사하였다. 모든 온도(35, 45, $55^{\circ}C$)에서 건조 초기에 많은 양의 잔류 메틸렌 클로라이드가 제거되었으며 건조 온도가 증가할수록 건조 효율은 증가하였다. 건조 온도가 증가할수록 파클리탁셀의 유효확산계수($1.299{\times}10^{-13}{\sim}2.571{\times}10^{-13}m^2/s$)와 물질전달계수($1.625{\times}10^{-11}{\sim}4.857{\times}10^{-11}m/s$)는 증가하였다. 또한 낮은 Biot 수(0.0100~0.0151)로부터 건조의 진행이 주로 파클리탁셀의 외부확산에 의해 조절됨을 알 수 있었다.

• 한국기계가공학회지
• /
• 제16권4호
• /
• pp.46-52
• /
• 2017

We quantitatively measured the mass transfer from friction surfaces, specifically brake pads and rotors, using laser plasma spectroscopy. Specifically, we modelled the mass transfer from the pad to the rotor and measured the elemental diffusion intensity distribution in the rotor material using laser plasma spectroscopy. The main elements measured were Cu, Ni, Ti, and Cr, and the distribution of these after transfer was measured as the ratio of the atomic peak and the ion peak of the plasma in the rotor exposed to friction and the surface composition of the rotor and the roughness, respectively. We measured and quantified the diffusion coefficient for each element through the mass transfer model and found that Cr obtained the largest diffusion coefficient (D) of the elements measured based on this system with a value of $1.9484{\times}10^{-15}m^2/s$.

• Journal of the Korean Wood Science and Technology
• /
• 제40권5호
• /
• pp.352-362
• /
• 2012

Mass transfer behavior in wood was estimated through its microscopic structure. The diffusion coefficients which were decided by theoretical equations are influenced by different anatomical properties of wood. From the experiment, the moisture flux was linear to the square root of time. The diffusion coefficients had a regular tendency during the time elapse. During the modeling, it is necessary to understand the limitation of parameters and consider the particular situation to be simulated. In hardwood, because the apertures were not considered, tangential mass transfer simulation was totally different from experiment. As a result, a hardwood model design should consider the apertures which are even on the fiber walls.

• Journal of Electrochemical Science and Technology
• /
• 제3권4호
• /
• pp.165-171
• /
• 2012

An experimental study of mass transfer to an amalgamated copper rotating disc electrode has been employed to determine an empirical correlation for the mass transfer rate in laminar flow. The study was performed in a three-electrodes configuration using 0.1 M boric acid and 0.1M potassium chloride as supporting electrolyte with Zn (II) concentration in the range (25-100 mg $dm^{-3}$). Polarization curves at different zinc ion concentration are reported. Hydrogen and oxygen reduction has also been considered.The diffusion coefficients and mass transfer coefficient were obtained using limiting diffusion current technique based on zinc ion reduction. A least squares analysis indicates that the laminar flow results for 13067 < Re > 57552 and 550 < Sc > 1390 can be correlated by the following equation with correlation coefficient (CR) equal to 0.98: $sh=0.61Re^{0.5}Sc^{1/3}$.

• Bulletin of the Korean Chemical Society
• /
• 제33권2호
• /
• pp.469-472
• /
• 2012

Intensity modulated photocurrent spectroscopy and intensity modulated photovoltage spectroscopy were investigated to measure the dynamic response of charge transfer and recombination in the standard, $TiCl_4$-treated and the combined scattering layer electrode dye-sensitized solar cells (DSSCs). IMPS and IMVS provided transit time ($\tau_n$), lifetime ($\tau_r$), diffusion coefficient ($D_n$) and effective diffusion length ($L_n$). These expressions are derived that generation, collection, and recombination of electrons in a thin layer nanocrystalline DSSC under conditions of steady illumination and with a superimposed small amplitude modulation. In this experimental, IMPS/IMVS showed that the main effect of $TiCl_4$ treatment is to suppress the recombination of photogenerated electrons, thereby extending their lifetime. And the Diffusion coefficient of combined scattering layer electrode is $6.10{\times}10^{-6}$ higher than that of the others, resulting in longer diffusion length.

• 한국식품과학회지
• /
• 제23권2호
• /
• pp.217-223
• /
• 1991

Gel식품의 구조적 특성을 밝히는 일은 특수한 장치나 분석방법이 요구되어 왔으나 본 연구에서는 조작이 간편하고 확산식에 잘 맞는 농도의 해를 구할 수 있는 capillary method를 통해 확산량과 확산계수를 예측하였다. 확산량은 거리, 시간, agar% 농도를 독립변수로 하여 도시하고 추정된 몇 가지 함수식으로부터 SPSS 통계 package 중 regression program을 이용해 단순회귀시켜 R-square가 가장 높은 식을 채택하고 다시 각 독립변수에 대한 함수식을 이용해 다중회귀분석을 실시함으로써 최종 model식을 수립하였다. 기존의 확산계수 예측방법은 Fick의 제 2법칙의 해식으로부터 예측되는 것이 일반적이었으나 그 식이 난해하고 시간이 많이 걸려 본 연구에서는 좀 더 간편한 방법으로 확산계수를 구하고자 수치해석적 방법에 따라 확산계수를 예측하였으며 그 산술평균을 확산계수 D값으로 나타내었다.

• Membrane and Water Treatment
• /
• 제2권3호
• /
• pp.159-173
• /
• 2011

The air gap membrane distillation (AGMD) process was applied for water desalination. The main objective of the present work was to study the heat and mass transfer mechanism of the process. The experiments were performed on a flat sheet module using aqueous NaCl solutions as a feed. The membrane employed was hydrophobic PTFE of pore size 0.22 ${\mu}m$. A mathematical model is proposed to evaluate the membrane mass transfer coefficient, thermal boundary layers' heat transfer coefficients, membrane / liquid interface temperatures and the temperature polarization coefficients. The mass transfer model was validated by the experimentally and fitted well with the combined Knudsen and molecular diffusion mechanism. The mass transfer coefficient increased with an increase in feed bulk temperature. The experimental parameters such as, feed temperature, 313 to 333 K, feed velocity, 0.8 to 1.8 m/s (turbulent flow region) were analyzed. The permeation fluxes increased with feed temperature and velocity. The effect of feed bulk temperature on the boundary layers' heat transfer coefficients was shown and fairly discussed. The temperature polarization coefficient increased with feed velocity and decreased with temperature. The values obtained were 0.56 to 0.82, indicating the effective heat transfer of the system. The fouling was observed during the 90 h experimental run in the application of natural ground water and seawater. The time dependent fouling resistance can be added in the total transport resistance.