• 비파괴검사학회지
• /
• 제7권2호
• /
• pp.35-41
• /
• 1988

The optimum test conditions of measuring the crack height were determined for the two-probe ultrasonic diffraction method. The applicability and the accuracy of the two-probe ultrasonic diffraction method on the inclined artificial cracks and the fatigue cracks were evaluated. It us possible to measure the height of the normal and inclined artificial cracks with the maximum error of ${\pm}\;0.5mm$ with the two-probe ultrasonic diffraction method. It was found, however, that the accuracy of this method in meaasuring the height of the fatigue crack depends on the degree of closure of the crack tip. It was desirable to choose a refraction angle as small as possible, but the angle should not be so small that the distortion of the lateral waveform became appreciable.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.439-442
• /
• 2008

Diffraction of multi-directional random waves passing semi-infinite breakwater is investigated by using analytic solution derived by Penny and Prices(1952). An irregylarity of period and incident angle of waves and regular periods for regular waves are considered in addition by expanding from the past study which used only monochromatic wave in general. The Bretschneider-Mitsuyasu frequency spectrum and Mitsuyasu directional spectrum are used for incident waves. And diffraction of multi-directional random waves is reappeared by decomposing numerical results of several monochromatic waves which have variable period and incident angle. Analytic solution on the diffraction of regular waves and multi-directional random waves calculated in this study.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 추계학술대회 논문집
• /
• pp.138-143
• /
• 2001

Based on mild slope equation and parabolic approximation the forward diffraction of monochromatic waves by a straight breakwater are studied numerically. The characteristics and effects of stem wave along breakwater and the relations between the stem wave and incident wave angle are discussed.

• Macromolecular Research
• /
• 제14권6호
• /
• pp.588-595
• /
• 2006

The morphology, structure and melting behaviour of cold-crystallized isotactic polystyrene (iPS) were studied by differential scanning calorimetry (DSC), wide angle X-ray diffraction (WAXD) and small angle X-ray scattering (SAXS). The polymer was found to crystallize according to the dual-lamellar stack model. The two populations of lamellae, along with a melting-recrystallization phenomenon, determined the appearance of multiple melting peaks in DSC traces. The annealing peak was attributed to the relaxation of a rigid amorphous phase, rather than to the melting of crystalline material.

• 천문학회지
• /
• 제29권spc1호
• /
• pp.399-400
• /
• 1996

LAMOST is a special reflecting Schmidt telescope. Both the refleting Schmidt plate $M_A$ and the spherical primary mitrror $M_B$ are segmened mirrors. These two cofocus but not co-phase. The diffraction of the optical system is decided by the shape overlapping of $M_A$ and $M_B$. This paper describes the diffraction caculating results with different declination and different field angle. The diffraction influence to the image quality is acceptable in the error buget of optical system. It also proves that the size seletion of the sub-mirror is reasonable.

• 한국광학회지
• /
• 제33권6호
• /
• pp.260-266
• /
• 2022

2개의 결합층과 2개의 격자 층으로 구성된 회절격자 구조를 형성하고, 최적화 기법을 통하여 -1차에서 높은 투과 회절 효율을 가지는 회절격자를 설계하였다. 설계된 회절격자는 설계 중심파장에서 99.997%의 transverse electric wave 회절 효율을 가지고 있었으며, 95% 이상의 회절 효율을 유지하는 파장 폭이 80 nm이고 입사각 폭이 20.0°이었다. 회절격자 공차 분석을 수행하여 95% 이상의 회절 효율을 가지기 위한 두께 공차가 최소 60 nm 이상 확보되어 있고, 내부각도 10° 이내의 사다리꼴 모양에서도 회절 효율을 유지할 수 있음을 확인하였다.

• 한국자동차공학회논문집
• /
• 제10권6호
• /
• pp.150-157
• /
• 2002

In textured material, diffraction angle $2{\theta}$ usually shows a nonlinear relation against $sin^2{\psi}$ due to elastic anisotropy of crystals. SPHD and SPCD steel is cold-rolled carbon steel for automobile. The characteristics X-ray for stress measurement is Cr $K_{\alpha}\;and\;Mo\;K_{\alpha}$ characteristic X-ray. The $2{\theta}-sin^2{\psi}$ diagram under elastic strain seems to have a linear behavior using regression line of data but has a nonlinear behavior in distribution of data by Cr $K_{\alpha}$ characteristic X-ray. As the plastic strain of specimen increases, the nonlinearity of $2{\theta}$ with respect to $sin^2{\psi}$ increases remarkably. On the other hand, the diffraction angle $2{\theta}$ by Mo $K_{\alpha}$ characteristic X-ray shows a good linearity on $2{\theta}-sin^2{\psi}$ diagram under plastic strain as well as elastic strain. Therefore, this paper presents the measurement of residual stress in cold-rolled carbon steel for automobile using penetration depth of Mo $K_{\alpha1}$ characteristic X-ray and multiplicity factor of crystal diffraction plane.

• 대한전자공학회논문지
• /
• 제26권4호
• /
• pp.16-26
• /
• 1989

임의의 각을 가진 쇄기형 유전체의양 경계면을 E-편파된 평면화가 입사할 경우 발생하는 전자파의 회절패턴을 기하광학해와 모서리회절파의 합으로 표시하였다. 모서리 회절파의 회절계수는 물리광학근사로 구한 회절계수를 모서리 끝에 분포한 다극선전원으로 수정하여 구하였다. 쇄기각 $120^{circ}$, 입사각 $60^{circ}$ 인 유전체의 비전율을 2, 5, 10으로 변화시키고, 측정거리도 모서리 끝점으로 부터 5와 10파장인 경우에 대해 기하광학해와, 물리광학해, 다극선전원으로 교정한 수정해 순으로 각각의 회절패턴을 그림으로 나타내었다. 본 논문에서 구한 수정해는 모서리 끝점으로 부터 멀리 떨어진 곳에서만 유용한 점근해임을 알 수 있으나, 유전체 경계면에서 경계조건을 만족함을 보였다.

• Journal of the Optical Society of Korea
• /
• 제18권6호
• /
• pp.685-690
• /
• 2014

Microholographic gratings were prepared on an aluminum oxide ($Al_2O_3$) surface using a 140-fs pulse at a center wavelength of 800 nm. The $Al_2O_3$ was deposited on a silicon wafer and on indium tin oxide glass to a thickness of approximately 25 nm using an atomic layer deposition process. The silicon wafer substrate exhibited reflection-type gratings that were measured as a function of the incidence angle. The diffraction efficiency of the fabricated gratings was measured, with a maximum diffraction efficiency of 45% at an incidence angle of approximately $30^{\circ}$.

• 한국진공학회지
• /
• 제6권3호
• /
• pp.177-180
• /
• 1997

Angle Resolved Ultraviolet Photoemission Spectroscopy(ARUPS) 연구를 위한 표면 구조 확인과 표면 방향 결정을 위한 LEED를 제작하여 그 성능을 조사하였다. 컴퓨터 시뮬 레이션을 이용하여 제작에 필요한 요인들을 최적의 값으로 결정하였다. 제작된 LEED는 3Grid방식을 채택하였고 시료와 스크린 사이의 거리를 75mm, 투영 각도를 $80^{\circ}$로 하였다. 전자총은 TVgun을 사용하였고 이 Gun의 특성을 조사하였다. 완성된 LEED의 성능조사를 위하여 Si(001), $Al_2O_3$(0001)표면의 pattern을 분석하였다.