• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.293-296
• /
• 2002

Surface relief holograms are fabricated by means of irradiation of laser interference patterns. The diffraction efficiency and the surface relief depth depend on the writing energy and the polarization of the writing laser beam. This structure is very stable at temperatures under glass transition temperature $T_g$ and can be erased by heating above $T_g$. We proposed a new technique to control the surface relief structure. The electric charge was deposited on the surface relief grating in a corona-depositing poling setup in an oven. The first-order diffraction efficiency measured before and after corona discharge increased from about 0.24 % to about 28 %. This diffraction efficiency increase is mainly caused by the increase of the relief depth caused by the electric charge. The relief depth is increased from 20 nm to 350 nm by corona charging. .

• Macromolecular Research
• /
• v.11 no.1
• /
• pp.36-41
• /
• 2003

Holographic gratings in two kinds of photopolymers (PPs) were fabricated by optical interference method. Polyvinylalcohol (PVA) and polyvinylacetate (PVAc) were employed as polymer binders and photopolymerization of acrylamide (AA) was confirmed using infrared spectroscopy. Dynamic behavior of the diffraction efficiency was monitored and its temporal stability at room temperature was also observed. Additionally, the temperature dependence of these gratings was investigated in two PPs. The surface topographical change of the photopolymer layer was observed by atomic force microscope (AFM).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.134-134
• /
• 2010

We have investigated the holographic grating formation on Ag-doped amorphous chalcogenide AsGeSeS thin films with Ag thickness. Holographic gratings have been formed using Diode Pumped Solid State laser (DPSS, 532.0nm) under [P:P] polarized the intensity polarization holography. The diffraction efficiency was obtained by +1st order intensity.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.209-214
• /
• 2017

A plane-wave incident upon asymmetric multi-layered dielectric grating as well as symmetric grating structure generates space harmonics. Selected space harmonics among those harmonics can undergo strong resonance scattering variations known as GMR(guided-mode resonance). In this paper, to clarify these effects, the field propagation and dispersion curve inside the grating region are analyzed by using a rigorous equivalent transmission-line theory(RETT) based on eigenvalue problem. The results show that, at the peak of a scattering resonance, the reflected mode is almost identical to a leaky wave that can be supported by the grating structure. Thus, it confirms to be occurred GMR effect associated with the free-resonant character of leaky waves at asymmetric multi-layered dielectric gratings. Quantitative simulation results illustrating the behavior of typical gratings are given, and the special case of normal incidence is discussed for TE and TM modes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.12
• /
• pp.1353-1361
• /
• 1992

Holographic optical element(HOE) is fabricated with the properties of lightweight, thin thickness and interconnectivity for free space. Particularly, HOE for optical interconnection and multiple image processing should have a high efficiency and equal spot intensity, Nonlinear equations for 2-dimensional binary phase grating(BPG) structure is solved by computer simulation based on modified Newton method. Computer-generated pattern drawn by plotter is scaled down and translated into the microfilm. After contact printing between the microfilm and silver halide hologram film, phase diffraction grating produces the $5{\times}5$ multiple spots. Experimental results are shown that bleached phase grating has a high efficiency and equal focused beams except central zero order.

• Journal of the Korean earth science society
• /
• v.43 no.1
• /
• pp.1-22
• /
• 2022

We provide a detailed description of the installation and operation of a remote spectroscopic meteor observation system at Unjangsan optical astronomy observatory. Three light-sensitive charge-coupled device cameras were installed, and two cameras had a diffraction grating attached to the front of the lens. Station employ sensitive "Watec-902H2" cameras in combination with f/1.2 lenses were installed in November 2019. Diffraction gratings for spectral observations were used at 500 l/mm. Observations were conducted from November 2019 to June 2020. We employed the SonotaCo UFO software suite for meteor detection. Subsequently, meteor spectra were analyzed using field-tested RSpec software. To analyze the observation images, astronomical calibration and photometric calibration were performed, and the chemical elements of the meteor were determined. The study results are presented along with the system setup installation and operation experience. Brief information regarding the origin of the meteor was also provided based on the results.

• Macromolecular Research
• /
• v.13 no.6
• /
• pp.477-482
• /
• 2005

Photopolymers are attractive materials for holographic 3-D data storage because of their high photosensitivity and large refractive index modulation. We synthesized the six-armed dendrimer for fabricating the new photopolymer. It was prepared using the initiating mixture of hexaarylbiimidazole (HABI), mercapto-benzoxazole (MOBZ), and 2,6-bis(4-diethylaminobenzylidene)cyclopentanone (DEAW), which is sensitive to 514 nm wavelength. The holographic gratings were fabricated successfully in these photopolymer samples by conventional optical interference method. We investigated the effect of dendrimer, either as a binder or as a plasticizer in the cellulose acetate butyrate (CAB), on the diffraction behavior. The addition of only 1 wt$\%$ of dendrimer-I into the CAB significantly increased the diffraction efficiency. The sample doped with dendrimer showed around 80-83$\%$ of the diffraction efficiency.

• Korean Journal of Optics and Photonics
• /
• v.7 no.3
• /
• pp.207-212
• /
• 1996

We propose an extended additional layer method (EALM) of calculating the coupling coefficient of arbitrary shaped diffraction gratings. In EALM, to determine the unperturbed field distribtution, a grating region is replaced by a new uniform layer whose dielectric constant is the average value of the dielectric constant of a grating region in both longitudinal and transverse directions. Using this method, we calculate the coupling coefficient for a five-layer distributed feedback structure device with trapezoidal and triangular gratings. The validity of this method is established by comparing the results calculated by partitioning the grating region up to five uniform layers.

• Journal of the Optical Society of Korea
• /
• v.3 no.2
• /
• pp.41-46
• /
• 1999

Spatial and temporal dynamics arising in a photorefractive crystal(BaTiO3) during the process of double phase conjugation was studied experimentally. We studied the dynamical effects caused by the buildup of the diffraction grating and turn on of phase conjugated beams, as well as the spatial effects caused by the finite transverse coupling of beams and the propagation direction of beams. We observed conical emission in DPCM. We believe that various temporal and spatial instabilities are due to movement of the nonlinear grating. For a real beam coupling and constructive interaction of interference fringes in the crystal, we observed steady, periodic, irregular temporal behavior. And, by the calculation of the correlation index, we found that the spatial correlation decreased as the transverse interaction region was increased.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.218-218
• /
• 2006

A number of new ideas have been implemented to control the droplet morphology and electrooptic properties of holographic polymer dispersed liquid crystal (HPDLC). Doping of conductive fullerene particles to the conventional HPDLC induced dual effects of reducing both droplet coalescence and operating voltage. Chain transfer agent gave higher gel content with lower crosslink density, less dark reactions and less grating shrinkage with much smooth LC-polymer interfaces. Addition of octanoic acid (OA) to the formulation of HPDLC gave a decrease in droplet size and monotonic increase of the off state diffraction throughout the OA content.