• Elastomers and Composites
• /
• v.50 no.2
• /
• pp.92-97
• /
• 2015

A study on reaction kinetics for a PTMG/TDI prepolymer with 2,2'-dichloro-4,4'-methylenedianiline (MOCA), of which formulations may be generally used for fabricating high performance polyurethane elastomers, was peformed using non-isothermal differential scanning calorimetry (DSC). A number of thermograms were obtained at several constant heating rates, and analysed using Flynn-Wall-Ozawa (FWO) isoconversional method for activation energy, $E_a$ and extended-Avrami equation for reaction order, n. Urea formation reaction of the present system was observed to occur through the simple exothermic reaction process in the temperature range of $100{\sim}130^{\circ}C$ for the heating rate of $3{\sim}7^{\circ}C/min$. and could be well-fitted with generalized sigmoid function. Though activation energy was nearly constant as $53.0{\pm}0.5kJ/mol$, it tended to increase a little at initial stage, but it decreases at later stage by the transformation into diffusion-controlled reaction due to the increased viscosity. Reaction order was evaluated as about 2.8, which was somewhat higher than the generally well-known $2^{nd}$ order values for the various urea reactions. Both the reaction order and reaction rate explicitly increased with temperature, which was considered as the indication of occurring the side reactions such as allophanate or biuret formation.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2001.11a
• /
• pp.134-137
• /
• 2001

The cure kinetics of a cycloalipatic epoxy / anhydride / Co(II) system for a no-flow underfill encapsulant, has been studied by using a differential scanning calorimetry(DSC) under isothermal and dynamic conditions over the temperature range of $160^{\circ}C ~220^{\circ}C$. The kinetic analysis was carried out by fitting dynamic/isothermal heating experimental data to the kinetic expressions to determine the reaction parameters, such as order of reaction and reaction constants. Diffusion-controlled reaction has been observed as the cure conversion increases and successfully analyzed by incorporating the diffusion control term into the rate equation. The prediction of reaction rates by the model equation corresponded well to experimental data at all temperature.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.555-555
• /
• 2012

The thermal stability of poly(sodium 4-styrenesulfonate) intercalated graphite oxide has been investigated using a differential scanning calorimeter. The poly(sodium 4-styrenesulfonate) intercalated graphite oxide composite shows a prominent exothermic reaction near $207^{\circ}C$ and an endothermic reaction near $453^{\circ}C$. Graphite oxide is responsible for the exothermic reaction while the endothermic reaction is caused by the poly(sodium 4-styrenesulfonate) used in the synthesis of poly(sodium 4-styrenesulfonate) intercalated graphite oxide. The onset temperature of the exothermic reaction of poly(sodium 4-styrenesulfonate) intercalated graphite oxide decreased by $92^{\circ}C$ in comparison with that of graphite oxide, indicating the addition of poly(sodium 4-styrenesulfonate) in the composite has diminished the thermal stability of graphite oxide.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.05a
• /
• pp.152-157
• /
• 2002

The cure and rheological behavior of Diglycidyl ether of bisphenol F, catalyzed by four kinds of imidazoles and a Nadic methyl anhydride curing agent were studied using a differential scanning calorimeter (DSC) and rheometer. The isothermal traces were employed to analyze cure reaction. The DGEBF/anhydride conversion profiles showed autocatalyzed reaction characterized by maximum conversion rate at 20~40 % of the reaction. The rate constants obtained from isothermal test showed temperature dependance, but reaction order did not. The order of reaction (m+n) was calculated to be close to 3. The measurements of viscosity and relation time in the presence of inorganic fillers were carried out at different isothermal curing temperatures. The viscosity and gelation time increased with filler content at the same isothermal temperature.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.11 no.1
• /
• pp.69-81
• /
• 1998

The aim of this study was to investigate the effects of Chungdaesan(CDS) by various administration routes on skin anaphylactic reaction. The most classic and popular skin reaction in vivo is passive cutaneous anaphylaxis(PCA) In this study, therefore, the author investigated the effect of CDS on PCA reaction activated by anti-dinitrophenyl immunoglobulin E antibody The results showed that CDS potently suppressed orally, topically, intraperitoneally, and intradermally administered. However, it did not show suppressive activity when intravenously administered. In addition CDS significantly inhibited anti-DNP IgE induced mast degranulation in mice skin. Moreover, CDS suppressed anaphylactic histamine release from mast cells induced by anti-dinitrophenyl immunoglobulin E antibody. These results indicate that CDS suppresses the PCA reaction by stabilization of mast cells in vivo and in vitro am] also suggest that the differential activity following administration routes may be caused by the difference of bioavailability.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.134-137
• /
• 2009

Commercially available elemental powders of Cu, Zn, Sn and Se were employed for crystallizing a stannite-type $Cu_2ZnSnSe_4$ compound by means of solid state reaction. $Cu_2ZnSnSe_4$ reaction chemistry was also modeled based on differential-thermal analysis and X-ray powder diffraction results. It was observed that Se tends to react preferably with Cu to form CuSe and $CuSe_2$ phases at low reaction temperature. The formation of $Cu_5Zn_8$ intermetallic phase was found to be the intermediate reaction path for the binary ZnSe formation. A solid state reaction at $320^{\circ}C$ reacted elemental powderst obinary selenides of CuSe, ZnSe and SnSe completely. The crystallization of $Cu_2ZnSnSe_4$ was was detected to begin at $300^{\circ}C$ and its weight fraction increased with an increase of reaction temperature, which most probably formed from the reaction between $Cu_2SnSe_3$ and ZnSe.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.11
• /
• pp.1513-1518
• /
• 2002

Kinetic studies on the water-gas shift reaction catalyzed by magnetite/chromium oxide and copper/zinc oxide were carried out by using an in situ photoacoustic spectroscopic technique. The reactions were performed in a closed-circulation reactor system using a differential photoacoustic cell at total pressure of 40 Torr in the temperature range of 100 to $350^{\circ}C.$ The CO2 photoacoustic signal varying with the concentration of CO2 during the catalytic reaction was recorded as a function of time. The time-resolved photoacoustic spectra obtained for the initial reaction stage provided precise data of CO2 formation rate. The apparent activation energies determined from the initial rates were 74.7 kJ/mol for the magnetite/chromium oxide catalyst and 50.9 kJ/mol for the copper/zinc oxide catalyst. To determine the reaction orders, partial pressures of CO(g) and H2O(g) in the reaction mixture were varied at a constant total pressure of 40 Torr with N2 buffer gas. For the magnetite/chromium oxide catalyst, the reaction orders with respect to CO and H2O were determined to be 0.93 and 0.18, respectively. For the copper/zinc oxide catalyst, the reaction orders with respect to CO and H2O were determined to be 0.79 and 0, respectively.

• Journal of Plant Biotechnology
• /
• v.30 no.4
• /
• pp.307-313
• /
• 2003

Fluorescent differential display (FDD) is a method for identifying differentially expressed genes in eukaryotic cells. The mRNA FDD technology works by systematic amplification of the 3' terminal regions of mRNAs. This method involve the reverse transcription using anchored primers designed to bind 5'boundary of the poly A tails, followed by polymerase chain reaction (PCR) amplification with additional upstream primers of arbitrary sequences. The amplified cDNA subpopulations are separated by denaturing polyacrylamide electrophoresis. To identify the genes involved in the development of first trap leaf, we applied a FDD method using mRNAs from leaf base, first trap leaf and flower tissue, respectively. We screened several genes that expressed specifically in first trap leaf. Nucleotide sequence analysis of these genes revealed that these were protease inhibitor (PI), myo-inositol-1-phosphate synthase and lipocalin-type prostaglandin D synthase. Northern blot analysis showed that these genes were expressed specifically in first trap leaf (in vivo and in vitro). FDD could prove to be useful for simultaneous scanning of transcripts from multiple cDNA samples and faster selection of differentially expressed transcripts of interest.

• Composites Research
• /
• v.33 no.2
• /
• pp.44-49
• /
• 2020

The cure kinetics of carbon fiber-reinforced prepreg for Vacuum Bag Only(VBO) process was studied by differential scanning calorimetry (DSC). The total heat of reaction (ΔH_total = 537.1 J/g) was defined by the dynamic scanning test using prepregs and isothermal scanning tests were performed at 130℃~180℃. The test results of isothermal scanning were observed that the heat of reaction was increased as the temperature elevated. The Kratz model was applied to analyze the cure kinetics of resin based on the test results. To verify the simulation model, the degree of cure from panels using different cure cycles were compared with the measurement. The simulation model showed that the error against the experimental value was less than 3.4%.

• Journal of applied mathematics & informatics
• /
• v.28 no.1_2
• /
• pp.49-58
• /
• 2010

In the present article we consider the diffusive Nicholson's blowflies equation with nonlocal delay incorporated into an integral convolution over all the past time and the whole infinite spatial domain $\mathbb{R}$. When the kernel function takes a special function, we construct a pair of lower and upper solutions of the corresponding travelling wave equation and obtain the existence of travelling fronts according to the existence result of travelling wave front solutions for reaction diffusion systems with nonlocal delays developed by Wang, Li and Ruan (J. Differential Equations, 222(2006), 185-232).