• Elastomers and Composites
• /
• 제50권2호
• /
• pp.92-97
• /
• 2015

A study on reaction kinetics for a PTMG/TDI prepolymer with 2,2'-dichloro-4,4'-methylenedianiline (MOCA), of which formulations may be generally used for fabricating high performance polyurethane elastomers, was peformed using non-isothermal differential scanning calorimetry (DSC). A number of thermograms were obtained at several constant heating rates, and analysed using Flynn-Wall-Ozawa (FWO) isoconversional method for activation energy, $E_a$ and extended-Avrami equation for reaction order, n. Urea formation reaction of the present system was observed to occur through the simple exothermic reaction process in the temperature range of $100{\sim}130^{\circ}C$ for the heating rate of $3{\sim}7^{\circ}C/min$. and could be well-fitted with generalized sigmoid function. Though activation energy was nearly constant as $53.0{\pm}0.5kJ/mol$, it tended to increase a little at initial stage, but it decreases at later stage by the transformation into diffusion-controlled reaction due to the increased viscosity. Reaction order was evaluated as about 2.8, which was somewhat higher than the generally well-known $2^{nd}$ order values for the various urea reactions. Both the reaction order and reaction rate explicitly increased with temperature, which was considered as the indication of occurring the side reactions such as allophanate or biuret formation.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2001년도 추계 기술심포지움
• /
• pp.134-137
• /
• 2001

The cure kinetics of a cycloalipatic epoxy / anhydride / Co(II) system for a no-flow underfill encapsulant, has been studied by using a differential scanning calorimetry(DSC) under isothermal and dynamic conditions over the temperature range of $160^{\circ}C ~220^{\circ}C$. The kinetic analysis was carried out by fitting dynamic/isothermal heating experimental data to the kinetic expressions to determine the reaction parameters, such as order of reaction and reaction constants. Diffusion-controlled reaction has been observed as the cure conversion increases and successfully analyzed by incorporating the diffusion control term into the rate equation. The prediction of reaction rates by the model equation corresponded well to experimental data at all temperature.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.555-555
• /
• 2012

The thermal stability of poly(sodium 4-styrenesulfonate) intercalated graphite oxide has been investigated using a differential scanning calorimeter. The poly(sodium 4-styrenesulfonate) intercalated graphite oxide composite shows a prominent exothermic reaction near $207^{\circ}C$ and an endothermic reaction near $453^{\circ}C$. Graphite oxide is responsible for the exothermic reaction while the endothermic reaction is caused by the poly(sodium 4-styrenesulfonate) used in the synthesis of poly(sodium 4-styrenesulfonate) intercalated graphite oxide. The onset temperature of the exothermic reaction of poly(sodium 4-styrenesulfonate) intercalated graphite oxide decreased by $92^{\circ}C$ in comparison with that of graphite oxide, indicating the addition of poly(sodium 4-styrenesulfonate) in the composite has diminished the thermal stability of graphite oxide.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2002년도 춘계 기술심포지움 논문집
• /
• pp.152-157
• /
• 2002

The cure and rheological behavior of Diglycidyl ether of bisphenol F, catalyzed by four kinds of imidazoles and a Nadic methyl anhydride curing agent were studied using a differential scanning calorimeter (DSC) and rheometer. The isothermal traces were employed to analyze cure reaction. The DGEBF/anhydride conversion profiles showed autocatalyzed reaction characterized by maximum conversion rate at 20~40 % of the reaction. The rate constants obtained from isothermal test showed temperature dependance, but reaction order did not. The order of reaction (m+n) was calculated to be close to 3. The measurements of viscosity and relation time in the presence of inorganic fillers were carried out at different isothermal curing temperatures. The viscosity and gelation time increased with filler content at the same isothermal temperature.

• 한방안이비인후피부과학회지
• /
• 제11권1호
• /
• pp.69-81
• /
• 1998

The aim of this study was to investigate the effects of Chungdaesan(CDS) by various administration routes on skin anaphylactic reaction. The most classic and popular skin reaction in vivo is passive cutaneous anaphylaxis(PCA) In this study, therefore, the author investigated the effect of CDS on PCA reaction activated by anti-dinitrophenyl immunoglobulin E antibody The results showed that CDS potently suppressed orally, topically, intraperitoneally, and intradermally administered. However, it did not show suppressive activity when intravenously administered. In addition CDS significantly inhibited anti-DNP IgE induced mast degranulation in mice skin. Moreover, CDS suppressed anaphylactic histamine release from mast cells induced by anti-dinitrophenyl immunoglobulin E antibody. These results indicate that CDS suppresses the PCA reaction by stabilization of mast cells in vivo and in vitro am] also suggest that the differential activity following administration routes may be caused by the difference of bioavailability.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.134-137
• /
• 2009

Commercially available elemental powders of Cu, Zn, Sn and Se were employed for crystallizing a stannite-type $Cu_2ZnSnSe_4$ compound by means of solid state reaction. $Cu_2ZnSnSe_4$ reaction chemistry was also modeled based on differential-thermal analysis and X-ray powder diffraction results. It was observed that Se tends to react preferably with Cu to form CuSe and $CuSe_2$ phases at low reaction temperature. The formation of $Cu_5Zn_8$ intermetallic phase was found to be the intermediate reaction path for the binary ZnSe formation. A solid state reaction at $320^{\circ}C$ reacted elemental powderst obinary selenides of CuSe, ZnSe and SnSe completely. The crystallization of $Cu_2ZnSnSe_4$ was was detected to begin at $300^{\circ}C$ and its weight fraction increased with an increase of reaction temperature, which most probably formed from the reaction between $Cu_2SnSe_3$ and ZnSe.

• Bulletin of the Korean Chemical Society
• /
• 제23권11호
• /
• pp.1513-1518
• /
• 2002

Kinetic studies on the water-gas shift reaction catalyzed by magnetite/chromium oxide and copper/zinc oxide were carried out by using an in situ photoacoustic spectroscopic technique. The reactions were performed in a closed-circulation reactor system using a differential photoacoustic cell at total pressure of 40 Torr in the temperature range of 100 to $350^{\circ}C.$ The CO2 photoacoustic signal varying with the concentration of CO2 during the catalytic reaction was recorded as a function of time. The time-resolved photoacoustic spectra obtained for the initial reaction stage provided precise data of CO2 formation rate. The apparent activation energies determined from the initial rates were 74.7 kJ/mol for the magnetite/chromium oxide catalyst and 50.9 kJ/mol for the copper/zinc oxide catalyst. To determine the reaction orders, partial pressures of CO(g) and H2O(g) in the reaction mixture were varied at a constant total pressure of 40 Torr with N2 buffer gas. For the magnetite/chromium oxide catalyst, the reaction orders with respect to CO and H2O were determined to be 0.93 and 0.18, respectively. For the copper/zinc oxide catalyst, the reaction orders with respect to CO and H2O were determined to be 0.79 and 0, respectively.

• Journal of Plant Biotechnology
• /
• 제30권4호
• /
• pp.307-313
• /
• 2003

파리지옥풀 first trap leaf에만 발현하는 유전자군을 탐색하기 위하여 기내배양 식물체와 포충능력을 가진 3년생 실생주을 이용하여 각각의 포충잎 (leaf base), 꽃조직 (flower tissue) 및 포충잎트랩 (first trap leaf)으로부터 분리한 RNA로 Fluorescent differential display (FDD)를 실시하였다. First trap leaf특이발현 유전자 15개를 screening하여 염기서열을 분석하였다. 분리된 DNA들은 protease inhibitor (Pl), myo-inositol-1-phosphate synthase 및 lipocalin-type prostaglandin D syn-thase 유전자들과 매우 유사하였다. 또한 Northern blot분석 결과, 이들 유전자들이 first trap leaf에 특이적으로 발현하고 있는 것을 확인하였다 FDD방법은 세포, 조직 및 기관에 특이적으로 발현하고 있는 유전자들을 선발하는데 매우 유용한 수단으로 사용될 수 있다.

• Composites Research
• /
• 제33권2호
• /
• pp.44-49
• /
• 2020

본 연구에서는 시차주사 열량계(differential scanning calorimetry, DSC)를 이용하여 진공백 성형 공정에 사용되는 탄소 섬유 프리프레그의 경화 거동을 연구하였다. 프리프레그를 이용한 동적주사 시험을 통해 전체 발열량(ΔH_total = 537.1 J/g)을 측정하였고, 130℃~180℃에서 등온주사 시험을 실시하였다. 등온주사 시험의 결과는 온도가 올라감에 따라 발열 반응이 증가되는 것을 확인하였다. 시험 결과를 토대로 수지의 경화 거동을 분석하기 위하여 Kratz 모델을 적용하였다. 서로 다른 경화 사이클로 제작된 평판의 경화도를 경화 예측 모델과 실험값을 비교하였다. 경화 예측 모델은 실험값 대비 3.4% 이하의 오차율을 보여 결과가 잘 부합하는 것을 확인하였다.

• Journal of applied mathematics & informatics
• /
• 제28권1_2호
• /
• pp.49-58
• /
• 2010

In the present article we consider the diffusive Nicholson's blowflies equation with nonlocal delay incorporated into an integral convolution over all the past time and the whole infinite spatial domain $\mathbb{R}$. When the kernel function takes a special function, we construct a pair of lower and upper solutions of the corresponding travelling wave equation and obtain the existence of travelling fronts according to the existence result of travelling wave front solutions for reaction diffusion systems with nonlocal delays developed by Wang, Li and Ruan (J. Differential Equations, 222(2006), 185-232).