• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회 논문집(I)
• /
• pp.397-402
• /
• 1998

The objectives of this paper are to estimate differential column Shortening and to determine appropreate compensation amount in 52 story Amatapura Apartment in Indonesia. for this, a computer program based on PCA and CEB-FIP code is developed. The results show that Elastic and Creep strain are the main factors of column shortening and the maximum differential shortening is appeared near the middle of the building height. The results between field survey and estimation have some difference, the most influential factor of the difference can be lateral restraints provided by horizontal members, which cannot be handled in this developed program. Hence introducing the modification factors from various field survey, this program can be used properly in design and construction procedures.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권3호
• /
• pp.207-212
• /
• 2013

A new CMOS voltage-bias differential LC voltage-controlled oscillator (LC-VCO) with active source degeneration is proposed. The proposed degeneration technique preserves the quality factor of the LC-tank which leads to improvement in phase noise of VCO oscillators. The proposed VCO shows the high figure of merit (FOM) with large tuning range, low power, and small chip size compared to those of conventional voltage-bias differential LC-VCO. The proposed VCO implemented in 0.18-${\mu}m$ CMOS shows the phase noise of -118 dBc/Hz at 1 MHz offset oscillating at 5.03 GHz, tuning range of 12%, occupies 0.15 $mm^2$ of chip area while dissipating 1.44 mW from 0.8 V supply.

• The Plant Pathology Journal
• /
• 제26권3호
• /
• pp.260-263
• /
• 2010

Scald, caused by Rhynchosporium secalis has been the major yield-reducing factor for barley production during the last decade. In this study, pathogenic groups of R. secalis were identified to obtain a global picture of the assembly of isolates involved in Syrian populations which is essential for the development of scald-resistant barley cultivars. To identify a number of pathogenic groups, 49 isolates collected over ten years from major barley growing areas in Syria were evaluated on five differential barley genotypes. Genotypes presented a continuous range of response from highly susceptible to moderately resistant, but none were immune to the disease. A cluster analysis placed isolates in six distinct differential pathogenic groups. Mean disease rating of 39.24% was the separation point between avirulent and virulent reactions. Isolate Rs46 exhibited distinct differential virulence patterns associated with high frequency across all genotypes. Hence, the data presented here provides crucial information for future selection of isolates to develop durable barley scald resistance.

• 동아시아경상학회지
• /
• 제7권4호
• /
• pp.51-58
• /
• 2019

Purpose - This paper aims to analyze the difference of technological innovative pattern by industry. Research design and methodology - we try to identify the major factors which can exert an effective influence on actual innovation output, utilizing the result of Korean Innovation Survey. By doing so, this work can make a comparison with Pavitt (1984) and succeeding discussion on sectoral pattern of innovation Results - Analysis on major industry in Korea shows that there are substantial differences in terms of the source of innovation, organization-related factor, and appropriation mechanism among each industry, and differential strategy to be proper for the nature of each industry is needed. There is some variation within industries which deemed as same type of sector defined by Pavitt. Conclusions - This analysis call for elaborate analysis on sectoral pattern of innovation, considering the change and difference of innovative environment as well as differential business strategy and way to do innovate, which is proper considering the nature of innovative pattern in each industry for successful technological innovation in Korea. At the same time, proper policy measure considering the differential pattern of technological innovation is needed.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.45-51
• /
• 2014

Distribution system is a critical link between customer and utility. The control of power loss is the main factor which decides the performance of the distribution system. There are two methods such as (i) distribution system reconfiguration and (ii) inclusion of capacitor banks, used for controlling the real power loss. Considering the improvement in voltage profile with the power loss reduction, later method produces better performance than former method. This paper presents an advanced evolutionary algorithm for capacitor inclusion for loss reduction. The conventional sensitivity analysis is used to find the optimal location for the capacitors. In order to achieve a better approximation for the current candidate solution, Opposition based Differential Evolution (ODE) is introduced. The effectiveness of the proposed technique is validated through 10, 33, 34 and85-bus radial distribution systems.

• Advances in Computational Design
• /
• 제1권3호
• /
• pp.275-296
• /
• 2016

This article presents an adaptive directional differential evolution (ADDE) algorithm and its application in solving discrete sizing truss optimization problems. The algorithm is featured by a new self-adaptation approach and a simple directional strategy. In the adaptation approach, the mutation operator is adjusted in accordance with the change of population diversity, which can well balance between global exploration and local exploitation as well as locate the promising solutions. The directional strategy is based on the order relation between two difference solutions chosen for mutation and can bias the search direction for increasing the possibility of finding improved solutions. In addition, a new scaling factor is introduced as a vector of uniform random variables to maintain the diversity without crossover operation. Numerical results show that the optimal solutions of ADDE are as good as or better than those from some modern metaheuristics in the literature, while ADDE often uses fewer structural analyses.

• International Journal of Automotive Technology
• /
• 제8권2호
• /
• pp.219-224
• /
• 2007

Recently, atmospheric contaminations has become worse due to the increased number of automobile. The PCV (Positive Crankcase Ventilation) valve acts as a flow control to allow re-combustion of blow-by gas by having it flow from a crankcase to an inlet manifold suction tube. Also, during the fabrication of the PCV valve, micro cracks may occur in the valve body and be extended under operation. The excessive stress distribution and crack initiation on the PCV valve body would bring an unstable blow-by gas flow rate control and would cause valve failure. The purpose of this study is to examine the crack affects on the stress and strain variations on the PCV valve according to the inlet and outlet manifold under differential pressures. From the results, we can explain the behavior of the crack extension for a safe condition of PCV valve.

• 한국의류산업학회지
• /
• 제16권6호
• /
• pp.897-907
• /
• 2014

The purposes of this study are to classify consumption values and to examine the effects of consumption values on appearance management behaviors. Questionnaires data was obtained through adults over 20 years old of age (N=478) in Gyeonggi-do, Daegu and Kyungpook regions. Descriptive statistics, factor analysis, multiple regression analysis, t-test and ANOVA were applied. The results of this study are as follows. First, consumption values are composed of three factors such as differential value, material value and practical value. Appearance management behaviors are identified such as surgery/skin care, clothing care, weight training and hair care. The weight training in appearance management behaviors is the most preferred behavior. Second, the results of regression analysis are like as follows: The effects of consumption on plastic surgery/skin care are explained by the differential value, material value and practical value(-). On weight training and hair care, the differential value and material value have positively significant effects. The differential value has significant effects on all over appearance management behaviors. Third, there are signigicant differences in consumption values and appearance management behaviors according to demographic variables. The single, females in 20s and 30s with higher monthly income and payment have higher differential value and lower practical value. The single and female in 20s and 30s were more involved in appearance management behavior.

• Structural Engineering and Mechanics
• /
• 제31권4호
• /
• pp.453-475
• /
• 2009

The literature regarding the free vibration analysis of Bernoulli-Euler and Timoshenko beams on elastic soil is plenty, but the free vibration analysis of Reddy-Bickford beams on elastic soil with/without axial force effect using the Differential Transform Method (DTM) has not been investigated by any of the studies in open literature so far. In this study, the free vibration analysis of axially loaded Reddy-Bickford beam on elastic soil is carried out by using DTM. The model has six degrees of freedom at the two ends, one transverse displacement and two rotations, and the end forces are a shear force and two end moments in this study. The governing differential equations of motion of the rectangular beam in free vibration are derived using Hamilton's principle and considering rotatory inertia. Parameters for the relative stiffness, stiffness ratio and nondimensionalized multiplication factor for the axial compressive force are incorporated into the equations of motion in order to investigate their effects on the natural frequencies. At first, the terms are found directly from the analytical solutions of the differential equations that describe the deformations of the cross-section according to the high-order theory. After the analytical solution, an efficient and easy mathematical technique called DTM is used to solve the governing differential equations of the motion. The calculated natural frequencies of one end fixed and the other end simply supported Reddy-Bickford beam on elastic soil using DTM are tabulated in several tables and figures and are compared with the results of the analytical solution where a very good agreement is observed and the mode shapes are presented in graphs.

• 한국의류산업학회지
• /
• 제4권1호
• /
• pp.11-18
• /
• 2002

The purpose of this study was to investigate the characteristic and composition factor of Japanese costume design. The stimulus were 25 contemporary costume design which represented the traditional image of Japanese. The main survey of questionary consisted of their evaluation of the Japanese costume image by 26 semantic differential bipolar scales and the subjects were 99 female students majoring in clothing and textiles. The data were analyzed by Factor analysis, Multidimensional Scaling Method and Regression Analysis. The major findings were as follows. As a result of design analysis, contemporary Japanese costume design which represented the traditional image had traditional form, color, texture, pattern, etc. Through factor analysis about Japanese costume image 7 factors were identified; Attractiveness, Attention, Cool and warm, Neatness, Activeness, Maturity, Classics. According to image positioning, Japanese costume design was classified by simple-decorative, soft-hard. As the result of regression analysis, The preference of Japanese costume image was related to attractive factor.