• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.41-41
• /
• 2022

• 아시안잔디학회지
• /
• 제3권1호
• /
• pp.5-12
• /
• 1989

Tiller numbers per Unit area were increased as plant density heightened followed by little difference in tiller number in 110 days after transplanting(ll0DAT), this being caused by the immediate increment of tiller since' 90DAT During the growth period, the greatest number of green leaves per unit area was attained in 90DAT of both 160-density and 200-density plots, and in l00DAT of 40-, 80-, and I 20-density plots. Thus, the period to reach the maximum green leaf number with the high plant density was earlier than with the' low plant density. The increment of plant density increased the DM weight of ahoveground part and, with 40-densitytreatment. DNI weight was increased 6.1 times as much up to 110DAT as up to 7ODAT but 2 to 2.9 times with other ehe'nsity treatments. The' rate of increase in stolon length was greatest at the period between 80 and 90DAT when DM weight of stolon showed a large increment. Meanwhile, the average number of stolon was 1.7 at 70DAT but was increased up to 10 at 110DAT probably due to accelerative appeance of Ist stolon branch since 8.0DAT. DM weight of stolon was found to exceeded that of root after 90DAT Thus it was concluded that, when turfs is estahlished from sprig. it may be desirable for first mowing practice to be made at least within l00 days after planting.

• 한국약용작물학회지
• /
• 제5권1호
• /
• pp.67-71
• /
• 1997

시호(柴胡) 성력화(省力化) 재배기술(栽培技術) 개발(開發)의 일환(一環)으로 기계파종시(機械播種時) 재식밀도(栽植密度) 차이(差異)가 생육과6 수량에 미치는 영향을 검토(檢討)코자 시험(試驗)한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 인력파종기(人力播種機)를 이용(利用)한 파종(播種) 소요시간(所票時間)은 손파종(播種)에 비하여 조간(條間) 20 및 30cm 처리(處理) 모두 96%의 파종노력을 절감(節減)할 수 있었다. 2. 재식밀도(栽植密度)에 따른 입모수(立毛數)는 조간(條間) 및 주간(株間)이 좁아질수록 많아졌으며, 경장(莖長) 및 마디 수는 차이가 없었다. 3. 주간거리(株間距離)가 좁아질수록 경태(莖太), 분기수(分枝數), 지상부종(地上部重), 규근경(圭根莖), 생체중(生體重) 및 건근중(乾根重)등이 감소(減少)되는 경향(傾向)이었다. 4. 근수량(根收量)은 조간(條間) 20cm 처리(處理)가 30cm보다 증가(增加)되었으며, 주간거리(株間距離)에 따라서는 조간(條間) 20 및 30cm 처리(處理) 모두 밀식(密植)일수록 증가(增加)되어 적정(適定) 재식밀도(栽植密度)는 조간(條間) 20cm에 조파(條播) 또는 주간(株間) 5cm로 나타났다. 5. 재식밀도(栽植密度)를 다르게 할 경우 입모수(立毛數)와 근수량(根收量)과는 정상관(正相關)을 보여 유의성(有意性)이 인정(認定) 되었다.

• 한국작물학회지
• /
• 제50권5호
• /
• pp.332-335
• /
• 2005

The three Korean wheat cultivars with different plant types; the erect, the middle and the creeping growth habit, were studied for their utilization to solar radiation, temperature changes on the furrow and to provide optimum planting space for producing the high yield in 2003. The average solar radiation rate was lowest for creeping type ($39.2\%$) and highest for erect type ($75.8\%$) The correlation coefficient between the coverage rate and the solar transmission rate was r = 0.8624 which was significant at $5\%$ level. The relative growth of the plant, tiller rate and leaf size was increased in the erect and the middle type at lower plant density, while no change on plant growth at creeping type regardless of plant density. The increase of leaf size in the lower plant density was due to longer flag and the first leaf than those of other plant types. The temperature on the furrow of growing plants was changed by the canopy. The changes in temperature pattern on the furrow according to plant types during winter season was different compared to the non plant ground. The temperature of the nonplant ground was the lowest due to solar reduction increasing the amount of cool air flowing in the furrow.

• 한국작물학회지
• /
• 제55권3호
• /
• pp.195-199
• /
• 2010

This experiment was conducted to develop optimum sesame cultivation practices as succeeding cropping system of watermelon in the greenhouse condition. We also compared major components in sesame seed cultivated in the greenhouse and open field condition. The adaptable varieties under the greenhouse condition were white sesame 'Pyoungan' and black sesame 'Jinki' which showed higher yield and disease resistance. We also conducted several experiments to determine optimum sowing date, planting density and pinching time. Grain yields were statistically different according to the several sowing dates. In general, sesame sowing on June 30th showed higher grain yields than July 10th, July 20th and July 30th in the greenhouse. We also found out sesame cultivation practice with the row spacing of 40 cm and interplant spacing of 30 cm (a few branch type) or 40 cm (many branch type) showed higher yield than other treatments. Optimum pinching time was 25 days after first flowering in main stem when thousand seed weight and grain yield were highest. In the comparison of major components of sesame at the different cultivation conditions, sesame seeds cultivated in the greenhouse contained 4% much more oil content than open field condition. The lignan compounds, sesamin and sesamolin were also higher by 6% in the greenhouse than open field condition. It was concluded that sesame cultivation practices as succeeding cropping system of watermelon in the greenhouse condition guaranteed higher grain yield with less labor input which is now emerging alternative farming practice system in present aging rural society and will also give sesame cultivation farmers to increase net income in Korea.

• Journal of Ecology and Environment
• /
• 제32권4호
• /
• pp.267-275
• /
• 2009

To investigate the possible applications of plants to remediate heavy-metal-contaminated soil, a pilot experiment was performed for four years in a reclaimed dredging area using two Alnus species, i.e., Alnus firma and Alnus hirsuta. In a comparison of phytomass of the two species at two different planting densities, the phytomass of Alnus planted at low density was twice as high as that of Alnus planted at high density after four years. The Alnus species showed active acclimation to the heavy-metal-contaminated soil in a reclaimed dredging area. A. hirsuta showed greater accumulation of phytomass than A. firma, indicating that it is the better candidate for the phytoremediation of heavy-metal-contaminated soils. In the pilot system, Alnus plants took metals up from the soil in the following order; Pb > Zn > Cu > Cr > As > Cd. Uptake rates of heavy metals per individual phytomass was higher for Alnus spp. planted at low density than those planted at high density in the pilot system. Low plant density resulted in higher heavy metal uptake per plant, but the total heavy metal concentration was not different for plants planted at low and high density, suggesting that the plant density effect might not be important with regard to total uptake by plants. The quantity of leached heavy metals below ground was far in excess of that taken up by plants, indicating that an alternative measurement is required for the removal of heavy metals that have leached into ground water and deeper soil. We conclude that Alnus species are potential candidates for phytoremediation of heavy-metal- contaminated surface soil in a reclaimed dredging area.

• 한국약용작물학회지
• /
• 제23권6호
• /
• pp.480-488
• /
• 2015

Background : In order to determine the effects of planting methods on root growth of ginseng varieties, two different methods, direct seed sowing and transplanting were compared in terms of their effects on different root growth characteristics. Methods and Results : Higher fresh root weight was observed in ginseng grown by direct seed sowing. Direct seed sowing of three cultivars (Sunhyang, Chungsun and K-1) resulted in higher yield, whereas no difference was observed in the yield of one cultivar (Chungsun). Gumpoong was highly tolerant to physiological stress, as it showed fewer symptoms of rusty and rough skin root diseases in both direct seed sowing and transplanting. The average main root length per total root length of ginseng grown by direct seed sowing was 33.6%, whereas that of ginseng grown by the average of those by transplanting was 22.4%. Other root growth characteristics, including root length, main root diameter, and number of side roots, improved when the direct seed sowing method was used. Conclusions : To our knowledge, this is the first study reporting the differences in root growth parameters of ginseng varieties grown by direct seed sowing or transplanting at the same planting density. Because of the advantages of direct sowing during ginseng planting, developing new varieties and improving cultivation methods are imperative.

• 한국환경복원기술학회지
• /
• 제14권1호
• /
• pp.57-65
• /
• 2011

The composition of species for each community of Quercus by vegetation and soil survey, the community classification by TWINSPAN, the structural characteristics of communities were used and analyzed during the period of 2000~2004 for Quercus mongolica forest. And the resulting suggestions for a subsequent planting model for forest are as follows. The Quercus mongolica community had the highest importance value for Quercus mongolica followed sequentially by Acer pseudosieboldianum, Acer mono, Rhododendron schlippenbachii, Tilia amurensis, Fraxinus rhynchophylla, and Fraxinus sieboldiana. As a result of suggesting a planting modeling for the Quercus mongolica communities in the areas with the warmth index of both $60.90{\sim}79.79^{\circ}C$ and $53.96{\sim}64.82^{\circ}C$, Quercus mongolica was absolutely dominant in case of the subtree layer for the accompaniment species of distribution in the planting modeling by tree layer in the two areas depending on the warmth index, while there were distinct differences shown in case of the lower tree layer. While Acer pseudosieboldianum, Tilia amurensis, Fraxinus rhynchophylla, Sorbus alnifolia, Acer mono, etc. were appeared in the subtree layer for the areas with the warmth index of $60.90{\sim}79.79^{\circ}C$. Cornus controversa, Quercus mongolica, Fraxinus sieboldiana, etc. were many appeared in the subtree layer for the areas with the warmth index of $53.96{\sim}64.82^{\circ}C$. And, when we made ecological Quercus mongolica community, subtree layer planting is different by warmth index.

• 농업과학연구
• /
• 제25권1호
• /
• pp.1-5
• /
• 1998

본 실험(實驗)은 생강종강 크기와 재식밀도를 달리하였을 때 생강의 생육 및 수량에 미치는 영향을 규명하기 위하여 실시하였던 바 다음과 같은 결과를 얻었다. 1. 재식밀도 $30{\times}30cm$인 경우에는 50g에서 초장이 47.2cm로 종강크기 50g이 가장 컸으며, 경수 및 경직경은 종강크기가 25g보다 50g와 75g에서 증가하였고, 재식밀도 $60{\times}30cm$인 경우에는 초장, 경수, 경직경이 종강크기가 클수록 증가하였다. 2. 엽면적은 재식밀도 $30{\times}30cm$에서 종강크기가 클수록 엽면적이 증가하였고, 재식밀도 $60{\times}30cm$인 경우에도 종강크기가 클수록 엽면적이 증가하였다. 3. 10g당 수량은 $30{\times}30cm$에서 종강크기가 25g일 때 1,868kg, 50g일 때, 2,212kg, 75g일 때 2,299kg이고 $60{\times}30cm$에서는 종강크기 25g일 때 1,486kg, 50g일 때 2,054kg, 75g일 때 2,129kg로 종강크기가 클수록 수량이 증가하였다.

• 한국작물학회지
• /
• 제31권2호
• /
• pp.231-237
• /
• 1986

향미종 연초 재배에서 재식밀도 및 질소 시비량에 따른 생육특성 및 수량, kg당 가격과 향미종 연초의 특징인 휘발성 유기산 함량의 관계를 분석, 재배법에 활용코자 시험한 결과, 1. 10 a당 13,885주에서 24,997주로 밀식할수록, 주당 생장량은 감소하나 LAI는 증가하였으며 수량은 21.875주까지 유의성 없이 증가하였으나 그 이하에서는 증가를 보이지 않았다. 2. 10a 당 질소 시비량을 1.5, 3.0, 4.5kg 증비 할수록 주당 생장량, 잎의 크기 및 LAI가 증가하고 수량 및 kg당 가격이 유의하게 증가하는 경향이였다. 3. 발뢰 7 일 전 엽중 질소 함량은 처리간 차를 나타냈으나, 건조엽중의 질소, 환원당, 니코딘 함량에서는 재식밀도 및 질소수준간 일정한 경향을 보이지 않았다. 4. 초장 및 엽의 크기가 작을수록 건조엽중 2-methyl butanoic, 3- methyl butanoic 및 3- methyl pentanoic acid의 함량이 높은 경향이었으며, 5. 건조엽중 휘발성 유기산 함량과 개화기의 초장(r=-0.49), 최대엽장(r=-049), 일주당 엽면적(r=-0.47)은 유의한 부의 상관을 보였다. LAI 및 단위엽면적당과는 각각 유의한 상관을 보이지 않았다.