• Advances in materials Research
• /
• 제8권4호
• /
• pp.275-293
• /
• 2019

The engine parts material used in gas turbines (GTs) should be resistant to high-temperature variations. Thermal barrier coatings (TBCs) for gas turbine blades are found to have a significant effect on prolonging the life cycle of turbine blades by providing additional heat resistance. This work is to study the performance of TBCs on the high-temperature environment of the turbine blades. It is understood that this coating will increase the lifecycles of blade parts and decrease maintainence and repair costs. Experiments were performed on the gas turbine blade to see the effect of TBCs in different combinations of materials through the air plasma method. Three-layered coatings using materials INCONEL 718 as base coating, NiCoCrAIY as middle coating, and La₂Ce₂O₇ as the top coating was applied. Finite element analysis was performed using a two-dimensional method to optimize the suitable formulation of coatings on the blade. Temperature distributions for different combinations of coatings layers with different materials and thickness were studied. Additionally, three-dimensional thermal stress analysis was performed on the blade with a commercial code. Results on the effect of TBCs shows a significant improvement in thermal resistance compared to the uncoated gas turbine blade.

• 한국대기환경학회지
• /
• 제23권6호
• /
• pp.744-751
• /
• 2007

Wet scrubber is widely used to remove toxic gaseous contaminants in various industries such as semi-conductor industry, display manufacturing industry and so on. In this study, to optimize a packed bed scrubber as one of typical wet scrubber size while keeping its performance, four different packing materials were investigated at different air flow rates, liquid-gas ratios and pH values. Ammonia, hydrochloric acid and hydrofluoric acid were used as test gases to characterize the scrubber performance. Gas removal efficiency increased as the packing size decreased, which resulted in the increase of specific surface area. The increase of air flow rate led to the decrease of gas removal efficiency, while the increase of liquid-gas ratio led to the increase of gas removal efficiency. For the case of $NH_3$ gas, lower pH, and for the cases of HCl and HF, higher pH contributed to higher gas removal efficiency. Gas removal efficiency of a wet scrubber increased in the order of HCl < $NH_3$ < HF according to its water solubility.

• Elastomers and Composites
• /
• 제54권4호
• /
• pp.308-312
• /
• 2019

Polyphenylene sulfide (PPS) is a well-known super engineering plastic with a high melting temperature (above 290℃). It is generally insoluble under regular conditions. Therefore, it can be used for replacing metallic materials. Many researchers are looking at the possibility of replacing aluminum in the engine compartment of an automobile. However, studies on PPS are not common as compared to conventional engineering plastics because only a few companies produce super engineering plastics. In this research, the material properties of PPS composites containing two different kinds of glass fibers and produced under different processing temperatures were investigated. The tensile strength of the PPS composites increased as the processing temperature increased. Although glass fibers with similar aspect ratios were compounded under the same processing condition, one of them yielded a higher mechanical strength.

• Nuclear Engineering and Technology
• /
• 제50권5호
• /
• pp.683-689
• /
• 2018

To evaluate equipment survivability of the polymer Viton, used in sealing materials, the effects of its thermal degradation were investigated in severe accident (SA) environment in a nuclear power plant. Viton specimens were prepared and thermally degraded at different SA temperature profiles. Changes in mechanical properties at different temperature profiles in different SA states were investigated. The thermal lag analysis was performed at calculated convective heat transfer conditions to predict the exposure temperature of the polymer inside the safety-related equipment. The polymer that was thermally degraded at postaccident states exhibited the highest change in its mechanical properties, such as tensile strength and elongation.

• 한국포장학회지
• /
• 제8권2호
• /
• pp.39-43
• /
• 2002

Increasing use of plastics in food packaging materials has led to the issue of food-plastic packaging materials's mutual interactions. Although the plastic packaging materials are generally considered as inert, migration and sorption of fatty materials are some of the problems associated with their use. So, this work investigated the compatibility of three structurally different polymers, polypropylene (PP), polyethyleneterephthalate (PET) and ethylene vinyl alcohol copolymer (EVOH) with some structurally different food fats. The main goal was to study the sorption of food fats by the plastic films and to see what extent mechanical properties of the plastic films was affected by plasticization effect due to sorption of fatty materials. PP, PET, and EVOH films was immersed in pure triglycerides, and then extracted with hexane and analyzed for the amounts of fat migrated. The sorbed films were also investigated for change in mechanical properties. Result showed that structural factor of the films and fatty materials plays important role in th migration process. The fat with the simplest structure are migrated more easily that the fat with more complex structure. However, structural effect of migration was varied according to degree of crystallinity and density of plastic films. In addition to that, polarity of plastic film was affected migration of fatty materials significantly. Additional research is needed to justify the reason why migration of fatty materials into the films was affected by polarity and structural integrity.

• 한국세라믹학회지
• /
• 제40권4호
• /
• pp.365-370
• /
• 2003

The phase development process of $Ba_2$ $Ti_{9}$ $O_{20}$ ceramics is not clearly known and frequently accompanies second phases which deteriorate dielectric properties. In synthesizing $Ba_2$ $Ti_{9}$ $O_{20}$ ceramics, in order to trace the reaction sequence during conventional solid-state reaction in BaO-Ti $O_2$ system, different barium sources of BaC0$_3$ and BaTi0$_3$ precursor were used as starting materials. From the analysis of XRD patterns, different secondary phases could be identified depending on the barium source used, which might mean that the equilibrium phases in BaO-Ti $O_2$ system are very difficult to be synthesized. Because the BaTi0$_3$ precursor provides short diffusion paths of ions, the system revealed less secondary phases during solid state reaction. In synthesizing BaO-xSm$_2$0$_3$-4.5Ti0$_2$ system using different barium sources, different secondary phases were developed also. Microstructure and dielectric properties were examined and discussed in terms of secondary phase development.

• 한국의상디자인학회지
• /
• 제9권1호
• /
• pp.1-11
• /
• 2007

This study suggests the new technique to express the texture that copes with the demands of the times by trying to apply the new Nuno-felt technique, to the silk, the representative material for emotion, in order to provide the basic data for the development of highly value added and competitive materials in the domestic and international markets as well as to meet the demand of consumers in the high emotion age pursuing the idiosyncrasy and qualify enhancement. Nuno-felt is the felting technique that places the wool of desired thickness on the thin fabric using wools and various kinds of fabric materials and rubs them. The samples are 3 kinds of silk including plain Chiffon with different touch, Pongee and Organza and Merino Wool, the best quality wool of wools. As a result, beyond the simple surface effect from the silk showing the superior drape feature with one color and soft wool, the Nuno-felt technique created the feminine as well as masculine, classic and modem image. Furthermore, the harmony of opacity and transparency produced the new dynamic and dimensional texture with the combination of different emotions through the visual emotion of different grey colors and rough, crude and soft touch. This study suggested the possibility that the Nuno-felt technique could create the new emotional materials for the modem sense by combining the materials with different features from the wools unlike the traditional simple felt technique.

• 한국토양비료학회지
• /
• 제50권1호
• /
• pp.12-20
• /
• 2017

Various types of organic materials could affect differently immobilization of cadmium (Cd) and its uptake by plant grown in soil. Therefore, this study was conducted to evaluate effect of different organic materials in reducing Cd phytoextractability in contaminated arable soil. To do this, rice straw and composted manure were selected as organic materials and applied at the rate of 0, 15, 30, and $45Mg\;ha^{-1}$ in Cd contaminated arable soil with $6.5mg\;kg^{-1}$ of total Cd. Radish (Raphanus sativa L.) was seeded and grown for 50 days to evaluate Cd phytoavailability with different organic materials. Composted manure was more effective to decrease $1M\;NH_4OAc$ extractable Cd concentration and increase pH of soil than rice straw. $One\;M\;NH_4OAc$ extractable Cd concentration significantly decreased with increasing application rate of composted manure. Tendency of Cd uptake by radish plant with application of different organic materials was similar to that of $1M\;NH_4OAc$ extractable Cd concentration and soil pH. Changes of soil pH with application of straw and composted might be one of factors to determine extractability and phytoavailability of Cd in this study. Radish yield significantly increased with up to $45Mg\;ha^{-1}$ of composted manure application but did not with straw application. In the view point of Cd phytoextractability and plant productivity, it is recommended to apply composted manure rather than straw in Cd contaminated arable soil.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2007년도 The 1st International Symposium on Advanced Magnetic Materials
• /
• pp.285.2-285.2
• /
• 2007

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2004년도 동계학술연구발표회 논문개요집
• /
• pp.119-119
• /
• 2004