• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권4호
• /
• pp.1714-1729
• /
• 2018

Change detection of remote sensing images is a profound challenge in the field of remote sensing image analysis. This paper proposes a novel change detection method for bitemporal remote sensing images based on feature fusion and fuzzy c-means (FCM). Different from the state-of-the-art methods that mainly utilize a single image feature for difference image construction, the proposed method investigates the fusion of multiple image features for the task. The subsequent problem is regarded as the difference image classification problem, where a modified fuzzy c-means approach is proposed to analyze the difference image. The proposed method has been validated on real bitemporal remote sensing data sets. Experimental results confirmed the effectiveness of the proposed method.

• Bulletin of the Korean Chemical Society
• /
• 제19권8호
• /
• pp.868-874
• /
• 1998

An equivalent retention has been experimentally observed in thermal field-flow fractionation (ThFFF) for different polymer-solvent systems. It is shown that iso-retention between two sets of polymer-solvent systems can be obtained by adjusting the temperature difference (ΔT) according to the difference in the ratio of ordinary diffusion coefficient to thermal diffusion coefficient. This method uses a compensation of field strength (ΔT) in ThFFF at a fixed condition of cold wall temperature. It is applied for the calculation of molecular weight of polymers based on a calibration run of different standards obtained at an adjusted AT. The polymer standards used in this study are polystyrene (PS), polymethylmethacrylate (PMMA), and polytetrahydrofuran (PTHF). Three carrier solvents, tetrahydrofuran (THF), methylethylketone (MEK) and ethylacetate (ETAc) were employed. Though the accuracy in the calculation of molecular weight is dependent on the difference in the slope of log λ vs. log M which is related to Mark-Houwink constant a, it shows reasonable agreement within about 6% of relative error in molecular weight calculation for the polymer-solvent systems having similar a value.

• 한국통신학회논문지
• /
• 제33권8B호
• /
• pp.667-680
• /
• 2008

본 논문에서는 802.11 무선 랜 네트워크 트래픽의 실제 관측 자료에 대한 연구 결과를 보인다. 패킷 트레이스는 대학 캠퍼스의 무선 랜 시설에서 얻은 자료로서 총합된 트래픽(aggregate traffic), 업스트림 트래픽(upstream traffic), 다운스트림 트래픽(downstream traffic), 그리고 TCP 패킷으로만 구성된 통합된 트래픽으로 이 4개의 트래픽 데이터를 수집하였다. 수집한 데이터에서 byte count 프로세스와 packet count 프로세스로 구성된 트래픽의 시계열과 시계열의 주변분포, 그리고 패킷 크기 분포에 대한 분석을 한다. 4개의 모든 데이터의 byte count 프로세스와 packet count 프로세스에서 장기 의존성 성질이 나타났다. 사용자가 인터넷으로 접속하는 없트�� 트래픽의 평균 패킷 크기는 151.7 byte였는데 다른 데이터의 평균 패킷 크기는 모드 260 byte 이상이었다. 최대 크기를 갖는 패이로드(payload)는 업스트림에서 3%, 그리고 나온트림에서 10%로 나타났다. 이런 분명한 패킷 크기 분포의 차이에도 불구하고 모든 4개의 데이터에서는 허스트(Hurst) 값이 모두 유사하게 나왔다. 허스트 값만으로는 트래픽의 확률적 특성을 충분히 설명할 수가 없다. 트래픽의 특성을 fractional-ARIMA(FARINA) 그리고 fractional Gaussian noise(FGN)으로 모델링을 한다. FGN은 연산을 하는데 있어서는 더 효율적이었고, FARINA는 트래픽 특성을 정확하게 모델링하는데 더 좋은 결과를 얻었다.

• 한국지리정보학회지
• /
• 제16권3호
• /
• pp.147-163
• /
• 2013

본 연구의 목적은 3 가지 보간 방법으로 생산한 남한 강수 자료에서 강수 분포의 차이를 비교하는 것이다. 보간된 강수 자료를 생태환경모델링, 수문모델링, 기후변화 영향평가 등의 연구에서 이용할 때 보간 방법에 따른 강수량의 차이는 중요한 정보이기 때문이다. 연구에는 기후변화정보센터에서 PRISM(Precipitation-elevation Regressions on Independent Slopes Model)으로 작성한 강수 자료와 본 연구에서 공동크리깅과 역거리가중법으로 작성한 강수 자료가 사용되었다. 보간된 강수 자료의 공간해상도는 1km이다. 보간 방법 선택에 의해 발생하는 강수량의 차이는 대체로 산지 유역의 자료에서 크다. 특히 군사분계선 주변과 소백산, 월악산, 덕유산, 지리산, 태백산지의 강수 자료에서 보간 방법의 차이에 따라 발생하는 월강수량의 차이는 약 10~20%, 또는 그 이상이었다. 이는 이 지역의 연구에 보간된 강수 자료를 이용할 때 연구에 채택한 보간 방법에 따라 최종 결과가 큰 영향을 받을 수 있다는 것을 의미한다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제25권1호
• /
• pp.77-81
• /
• 2002

The purpose of this study is to examine quantitatively the relationship between visual image quality and degradation In spatial resolution for a gamma camera by the increase in distance from collimator. The relationship between the portion(p) of images identified the difference of image quality and the difference(${\Delta}FWHM$) in FWHM between paired images was showed in a sigmoid curve. Using Dendy's method, minimum level to be correctly identified the difference of Image duality on three out of four occasion(p=0.75) was corresponded to 0.4 mm in ${\Delta}FWHM$. Using fuzzy theory, the level to be identified the difference of image quality was examined under various conditions. The truth-value of fuzzy sets-degraded or slightly degraded and not-degraded in image quality between palled Images-was gained the peak at 0.5 mm of ${\Delta}FWHM$. It was founded that changes of $0.4{\sim}0.5\;mm$ in FWHM-corresponding about 2 cm distance from collimator could be sufficiently identified in the difference of image quality.

• 보존과학회지
• /
• 제38권1호
• /
• pp.1-13
• /
• 2022

Colour consistency is an important consideration when selecting pigments used on works of art. In this study, we analyse the colour difference between two sets of synthetic blue glass pigments acquired at least 8 years apart from the same manufacturer in Japan. The old pigment set (unused, dry powder with four different grain sizes) appears faded compared to the new set. These pigments are made available for artistic use, commonly in Nihonga or Japanese paintings. Raman spectroscopy and SEM-EDS results characterize these pigments as cobalt aluminate spinels dissolved in leaded glaze, a special class of complex coloured inorganic pigments that is not well-understood in the field of conservation. Colour difference between the old and new pigments with four different grain sizes were quantified by analysing photomicrographs with image analysis software. Blue pigments with coarse and extremely fine grains showed significant colour change compared to pigments with medium and fine grain sizes. The high occurrence of crystallites in the finer grains give a final colour that is bluer and lighter. Possible causes for the colour difference including manufacturing methods and storage environment are discussed.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.86-89
• /
• 1999

Structural analysis of die set in cold forging is conducted by the finite element method and the results are introduced in this paper. The problem formulation is introduced in detail. In the approach, amount of shrink fit is controlled by thermal load, i.e., temperature difference between die insert and shrink fits. The loading conditions are extracted automatically from a forging simulator. An application example is given.

• Journal of applied mathematics & informatics
• /
• 제35권3_4호
• /
• pp.331-347
• /
• 2017

Soft sets are fantastic mathematical tools to handle imprecise and uncertain information in complicated situations. In this paper, we defined the hybrid structure which is the combination of soft set and complex number representation of intuitionistic fuzzy set. We defined basic set theoretic operations such as complement, union, intersection, restricted union, restricted intersection etc. for this hybrid structure. Moreover, we developed this theory to establish some more set theoretic operations like Disjunctive sum, difference, product, conjugate etc.

• 한국언어정보학회:학술대회논문집
• /
• 한국언어정보학회 2007년도 정기학술대회
• /
• pp.542-547
• /
• 2007

It is suggested that the difference between co-referential and bound reflexive pronouns found in many languages can be accounted for by using the notion of the case extension of a type <1> quantifier. Given this proposal the co-referential pronouns get their meaning when the corresponding NP takes nominal case extension first. Bound reflexives are reflexivisers in the sense that they are not case extensions of quantifiers although they also transform binary relations into sets. Examples from Japanese and from Polish are discussed.

• Journal of the Korean Statistical Society
• /
• 제11권1호
• /
• pp.25-35
• /
• 1982

A problem of selecting the least probable cell in a multinomial distribution is studied in a Bayesian framework. We consider two loss components the cost of sampling and the difference in cell probabilities between the selected and the least probable cells. A Bayes sequential selection rule is derived with respect to a Dirichlet prior, and it is compared with the best fixed sample size selection rule. The continuation sets with respect to the vague prior are tabulated for certain cases.