• Journal of Radiation Protection and Research
• /
• 제13권2호
• /
• pp.29-40
• /
• 1988

환경방사선 측정에 이용되는 휴대형 고순도 게르마늄검출기에 대한 스펙트럼-조사선량율 변환연산자를 원판형선원의 공간분포함수와 검출기의 평면에 대한 측정효율식을 적용하여 이론적으로 유도했다. 이와 같이 구한 변환연산자와 휴대형 고순도 게르마늄검출기를 이용해 한국에너지연구소내에서 방사선 조사선량율을 측정했다. 측정한 조사선량율을 이미 알려진 3'${\phi}\;{\times}$3'NaI(Tl) 섬광검출기에 대한 변환연산자를 적용해 NaI(Tl)검출기로 측정한 조사선량율과 가압형 이온전리함으로 측정한 값과 비교했다. 고순도 게르마늄 검출기로 얻은 결과는 NaI(Tl) 검출기와 가압형 이온전리함으로 얻은 값보다 약 17-29% 낮음을 보여주었다. 이 차이는 다른 문헌에서 보인 차이와 거의 같았다. 본 논문에서 제시한 스펙트럼-조사선량율 변환연산자는 탁상용 계산기로 쉽게 계산할 수 있으며 환경방사선의 측정에 사용되는 여러 검출기에 대해서도 쉽게 적용할 수 있는 장점이 있고 지각에서 방출되는 각 핵종별로 조사선량율을 구할 수 있는 장점이 있다.

• Clinics in Orthopedic Surgery
• /
• 제10권4호
• /
• pp.484-490
• /
• 2018

Background: The use of three-dimensional multi-segment foot models (3D MFMs) is increasing since they have superior ability to illustrate the effect of foot and ankle pathologies on intersegmental motion of the foot compared to single-segment foot model gait analysis. However, validation of the repeatability of the 3D MFMs is important for their clinical use. Although many MFMs have been validated in normal adults, research on MFM repeatability in children is lacking. The purpose of this study is to validate the intrasession, intersession, and interrater repeatability of an MFM with a 15-marker set (DuPont foot model) in healthy children. Methods: The study included 20 feet of 20 healthy children (10 boys and 10 girls). We divided the participants into two groups of 10 each. One group was tested by the same operator in each test (intersession analysis), while the other group was tested by a different operator in each test (interrater analysis). The multiple correlation coefficient (CMC) and intraclass correlation coefficient (ICC) were calculated to assess repeatability. The difference between the two sessions of each group was assessed at each time point of gait cycle. Results: The intrasession CMC and ICC values of all parameters showed excellent or very good repeatability. The intersession CMC of many parameters showed good or better repeatability. Interrater CMC and ICC values were generally lower for all parameters than intrasession and intersession. The mean gaps of all parameters were generally similar to those of the previous study. Conclusions: We demonstrated that 3D MFM using a 15-marker set had high intrasession, intersession, and interrater repeatability in the assessment of foot motion in healthy children but recommend some caution in interpreting the hindfoot parameters.

• 한국항행학회논문지
• /
• 제23권2호
• /
• pp.104-113
• /
• 2019

본 연구는 정기항공사 소속 조종사들을 대상으로 그들의 비행경력과 운항능력에 대한 실증연구를 하였다. 첫째, 정기항공사 소속 조종사들의 비행경력(비행시간 및 기종)에 따른 운항능력의 차이를 분석하였다. 이를 통해 신규로 항공운송용 조종사로 진입하고자 하는 인력들에 대해 항공사가 기대하는 조종사의 운항능력의 수준을 검증할 수 있었다. 분석결과 기장의 경우 해당기종 비행시간이 500시간이든 1500시간이든 시계비행 운항심사 결과 간의 차이가 없는 것으로 나타났다. 부기장은 1,500시간 이상부터는 시계비행 운항심사 결과의 차이가 나타났다. 부기장은 기장과 달리 해당기종 비행시간을 많이 가질수록 안정적인 시계접근을 할 수 있음이 판명된 것이다. 기종특성과 관련하여 cable 또는 fly-by-wire 기종에 따라 기장 집단은 시계비행 운항능력의 차이가없었다. 즉, 시계접근의 경우는 기종에 관계없이 기장급 조종사의 기량이 평가된다고 할 수 있겠다. 부기장집단에서는 기종 특성에 따른 유의한 차이가 있는 것으로 판명되었다.

• Clinical Endoscopy
• /
• 제57권2호
• /
• pp.237-245
• /
• 2024

Background/Aims: Endoscopic ultrasound-guided tissue acquisition (EUS-TA) using Franseen needles is reportedly useful for its high diagnostic yield. This study compared the diagnostic yield and puncturing ability of EUS-TA using 22-gauge cobalt-chromium (CO-Cr) needles with those of stainless-steel Franseen needles in patients with solid pancreatic lesions. Methods: Outcomes were compared between the 22-gauge Co-Cr Franseen needle (December 2019 to November 2020; group C) and stainless-steel needle (November 2020 to May 2022; group S). Results: A total of 155 patients (group C, 75; group S, 80) were eligible. The diagnostic accuracy was 92.0% in group C and 96.3% in group S with no significant intergroup differences (p=0.32). The rate of change in the operator (from training fellows to experts) was 20.0% (15/75) in group C and 7.5% (6/80) in group S. Stainless-steel Franseen needles showed less inter-operator difference than Co-Cr needles (p=0.03). Conclusions: Both Co-Cr and stainless-steel Franseen needles showed high diagnostic ability. Stainless-steel Franseen needles are soft and flexible; therefore, the range of puncture angles can be widely adjusted, making them suitable for training fellows to complete the procedure.

• Journal of applied mathematics & informatics
• /
• 제17권1_2_3호
• /
• pp.283-296
• /
• 2005

It is well known that the ordering of the unknowns can have a significant effect on the convergence of a preconditioned iterative method and on its implementation on a parallel computer. To do so, we introduce a block red-black coloring to increase the degree of parallelism in the application of the block ILU preconditioner for solving sparse matrices, arising from convection-diffusion equations discretized using the finite difference scheme (five-point operator). We study the preconditioned PGMRES iterative method for solving these linear systems.

• Korean Journal of Hydrosciences
• /
• 제6권
• /
• pp.51-66
• /
• 1995

Various Eulerian-Lagerangian numerical models for the one-dimensional longtudinal dispersion equation are studied comparatively. In the models studied, the transport equation is decoupled into two component parts by the operator-splitting approach ; one part governing advection and the other dispersion. The advection equation has been solved using the method of characteristics following flud particles along the characteristic line and the result are interpolated onto an Eulerian grid on which the dispersion equation is solved by Crank-Nicholson type finite difference method. In solving the advection equation, various interpolation schemes are tested. Among those, Hermite interpo;ation po;ynomials are superor to Lagrange interpolation polynomials in reducing both dissipation and dispersion errors.

• 제어로봇시스템학회논문지
• /
• 제19권3호
• /
• pp.262-267
• /
• 2013

This paper describes a vision based automation case study for the tire tread extruder line. To accurately measure the thread widths, two cameras with laser line illumination have been installed near the takeaway conveyer. The overall tread extruder line is then automated by controlling the speeds of take away conveyor and screw motor such that a difference between measured widths and the targeted data is minimized. By doing this, the conventional tread extruder line has been replaced by the developed automated computer system and with only one operator, increasing the production efficiency and reducing safety accidents.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2014년도 춘계 종합학술대회 논문집
• /
• pp.83-84
• /
• 2014

For hydrologic applications, lake levels is very important. As a first step in developing a remote-sensing based approach, lake stage estimation using remote sensing was proposed with the SRTM data from February 2000, which was providing a one-time snapshot. After several steps using contouring, masking, and CED, it was found that iterative contour fitting to a lake outline provided the outstanding result with the operator's decision. If the lake size is large enough, a constant meter of the difference removal due to bias found by Bhang et al. (2007) might be useful for more accurate estimations for the methods. A lake-level snapshot using SRTM data could provide estimates within 0.5 m level of accuracy for large lakes (> $10km^2$) with contouring. Also, even if the processing algorithm is complex, the accuracy was reliable. Overall, we confirmed that this study would provide useful information to ameliorate the quality of the SAR-derived DEMs specifically for water areas and if more expanded, SAR images can fruit result in water monitoring.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.516-519
• /
• 1997

In this paper, the control of the temperature for the vehicle air conditioner is implemented with the fuzzy controller using a micro controller. The linguistic control rules of the fuzzy controller are separated into two out variables(multi input multi output ; MIMO) : one is those for the blower motor, and the other is those for air mix door. The error in fuzzy controller, the input variable is defined as difference between the reference temperature and the actual temperature in the cabin room. The fuzzy control rules are established from the human operator experience, and based engineering knowledge about the process. The method of the center of gravity is utilized for the defuzzification.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1553-1558
• /
• 2003

The authors investigate influences of manipulator dynamics on and roles of kinesthetic sensation and visual sensation in a Human-Machine Cooperative System (HMCS). At first, the general structure and essential transfer functions of HMCSs are described based on the previous work. Then, after showing theoretical treatment of manipulator dynamics, this paper analyzes the influences on HMCSs in two cases: one is the control design focusing on tool dynamics and reaction force transfer function, and the other is that specifies maneuver transfer function and transfer function for object dynamics variation. In addition to conventional experiments only employing kinesthetic sensation, other experiments with both kinesthetic and visual sensations are performed to examine difference in the roles of these sensations and the validity of the design without the visual sensation.