• 전기학회논문지P
• /
• 제57권2호
• /
• pp.202-208
• /
• 2008

Condition monitoring technologies allow achieving this goal by minimizing downtime through the integrated planning and scheduling of repairs indicated by condition monitoring techniques. Thermal runaways induced by conduction problems deteriorate insulating material and cause disruptive dielectric discharges resulting in arcing faults. Therefore, having the ability to directly measure the temperature of the contacts while in service will provide more information to determine the true condition of the equipment. It allows connective measures to be taken to prevent upcoming failure. Continuous temperature monitoring and event recording provides information on the energized equipment's response to normal and emergency conditions. On-line temperature monitoring helps to coordinate equipment specifications and ratings, determine the real limits of the monitored equipment and optimize facility operations. Using wireless technique eliminates any need for special cables and wires with lower installation costs if compared to other types of online condition monitoring equipment. In addition, wireless temperature monitoring works well under difficult conditions in strategically important locations. Wireless technology for on -line condition monitoring of energized equipment is applicable both as stand alone system and with an interface for power quality monitoring system. The paper presents the results of wireless temperature monitoring: of electrical equipment at a power plant.

• 한국전자파학회논문지
• /
• 제11권8호
• /
• pp.1313-1321
• /
• 2000

본 논문에서는 필터의 설계 및 구현이 용이하고 소형화가 가능한 새로운 구조의 고온초전도 마이크로스트립 형태의 의사 집중상수 소자 공진기를 제안하였다. 또한, 공진기들 사이의 비 인접 결합을 이용하여 notch를 갖는 필터특성의 7-극 대역통과 필터를 설계, 제작하였다. 7-극 notch를 갖는 필터는 두께 0.5mm, 유전율 23.5의 $LaAlO_{3}$ 기판상에 YBCO를 양면 증착하여 제작하였다. 측정결과, 절대 온도 20K에서 중심 주파수 1774MHz 차단대역(cut-off-band)에서 33㏈감쇠를 나타내었다.

• 한국표면공학회지
• /
• 제49권2호
• /
• pp.119-124
• /
• 2016

Plasma electrolytic oxidation (PEO) is a promising coating process to produce ceramic oxide on valve metals such as Al, Mg and Ti. The PEO coating is carried out with a dilute alkaline electrolyte solution using a similar technique to conventional anodizing. The coating process involves multiple process parameters which can influence the surface properties of the resultant coating, including power mode, electrolyte solution, substrate, and process time. In this study, ceramic oxide coatings were prepared on commercial Al alloy in electrolytes with different KOH concentrations (0.5 ~ 4 g/L) by plasma electrolytic oxidation. Microstructural and electrochemical characterization were conducted to investigate the effects of electrolyte concentration on the microstructure and electrochemical characteristics of PEO coating. It was revealed that KOH concentration exert a great influence not only on voltage-time responses during PEO process but also on surface morphology of the coating. In the voltage-time response, the dielectric breakdown voltage tended to decrease with increasing KOH concentration, possibly due to difference in solution conductivity. The surface morphology was pancake-like with lower KOH concentration, while a mixed form of reticulate and pancake structures was observed for higher KOH concentration. The KOH concentration was found to have little effect on the electrochemical characteristics of coating, although PEO treatment improved the corrosion resistance of the substrate material significantly.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1530-1533
• /
• 2005

Total 12 units of high power klystron-modulator systems as microwave source is under operation for 2.5-GeV electron linear accelerator in Pohang Light Source(PLS) linac. RF power and beam power of klystron are precisely measured for the effective control of electron beam. A precise measurement and measurement equipment with good response characteristics are required for this. Input power of klystron is calculated from the applied voltage and the current on its cathode. Tiny measurement error severely effects RF output power value of klystron. Therefore, special care is needed to measure precise beam voltage. Capacitive voltage divider(CVD) unit is intended for the measurement of beam voltage of 400 kV generated from the pulsed klystron-modulator system. Main parameter to determine the standard capacitance in the high arm of CVD is dielectric constant of insulation oil. Therefore CVD should be designed to have a minimum capacitance variation due to voltage, frequency and temperature in the measurement range. This paper will discuss the analysis of capacitive voltage divider for a pulsed high-voltage measurement, and the empirical relations between capacitance and oil temperature variation.

• Advances in materials Research
• /
• 제2권2호
• /
• pp.119-131
• /
• 2013

Impedance and electrical conduction studies of $Ba(Nd_{1/2}Nb_{1/2})O_3$ ceramic prepared using conventional high temperature solid-state reaction technique are presented. The crystal symmetry, space group and unit cell dimensions were estimated using Rietveld analysis. X-ray diffraction analysis indicated the formation of a single-phase cubic structure with space group $Pm\bar{3}m$. Energy dispersive X-ray analysis and scanning electron microscopy studies were carried to study the quality and purity of compound. The circuit model fittings were carried out using the impedance data to find the correlation between the response of real system and idealized model electrical circuit. Complex impedance analyses suggested the dielectric relaxation to be of non-Debye type and negative temperature coefficient of resistance character. The correlated barrier hopping model was employed to successfully explain the mechanism of charge transport in $Ba(Nd_{1/2}Nb_{1/2})O_3$. The ac conductivity data were used to evaluate the density of states at Fermi level, minimum hopping length and apparent activation energy.

• 대한전자공학회논문지TC
• /
• 제44권11호
• /
• pp.42-47
• /
• 2007

본 논문은 초광대역 임펄스를 이용한 지반탐사 레이더에 있어서 지면 및 지면과 안테나 사이의 간격에 따른 임펄스 전파에 미치는 영향을 기술한다. 영향 연구를 위해 평판형 초광대역 다이폴 안테나를 개발하였다. 우선, 수치해석 방법을 이용하여 지면의 유전율 변화 및 안테나와 지면 사이의 간격에 대한 영향을 시뮬레이션하였다. 결과를 비교하기 위하여 실제 모래 및 수분이 포함된 토양으로 구성된 시험장을 제작하여, 개발된 다이폴 안테나를 사용하여 주파수 영역에서의 지면의 변화 및 안테나와 지면의 간격 차이에 의한 주파수 영역에서의 투과 특성을 조사하였다. 역 퓨리에 변환을 이용하여 주파수 영역에서 시뮬레이션 및 측정된 투과 특성을 시간 영역에서의 임펄스 응답 특성을 구하였다. 시뮬레이션과 측정 결과로부터 지면의 유전율이 높을수록 안테나와 지면과의 간격 변화가 클수록 최대 투과값이 생기는 주파수가 높아졌고, 투과 계수도 증가하였다. 시간영역에서는 유전율이 높을수록 지표면의 직접 반사에 의해 수신되는 신호가 크게 증가하였고, 수신 신호의 모양은 완전히 변형되었다. 또한, 지면과 안테나 사이의 간격 변화로 시간영역 반사 신호의 첨두치의 시간 위치가 변경됨을 알 수 있었다.

• 한국결정학회지
• /
• 제16권2호
• /
• pp.141-148
• /
• 2005

It is well known that the general metals have a lot of grain boundaries. The grain boundaries play a negative role to increase the resistivity and to decrease the conductivity. The small resistivity and the large conductivity have been a goal of the material scientists, and no signal noise, perfect signal transfer, and the realization of the real sound are the dream of electronic engineers and audio manias. Generally, oxygen free copper (OFC) and Ohno continuous casting (OCC) copper cables have been used for the purpose of the precise signal transfer and low noise. However they still include a lot of grain boundaries. In our study, we have grown the single crystal by the Czochralski method and succeeded to produce single crystal wires from the crystal in the dimension of $0.5{\times}0.5{\times}2500mm$. The produced wire still possesses very good single crystal properties. We observed the structure of the wire, and measured the resistance and impedance. Glow Discharge Spectrometer (GDS) was used for analyzing the compositions of copper single crystals and commercial copper. Current-Voltage curve, resistance, total harmonic distortion and speaker frequency response were measured for comparing electrical and acoustic properties of two samples.

• 한국항행학회논문지
• /
• 제22권1호
• /
• pp.27-30
• /
• 2018

본 연구에서는, 밀리미터파 무선 통신 시스템 응용을 위하여 hairpin 구조를 응용한 40 GHz 대역통과 여파기 (BPF; band pass filter)를 설계 및 제작하여 그 특성을 측정하였다. 3차원 전자계분석 툴과 hairpin BPF 설계 수식을 이용하여, 비유전율 2.2와 5 mil 두께의 Duroid (RT5880) 기판에 BPF를 설계하였다. 입 출력단에서 U-shape 공진기의 tapping 위치(t)는 external Q-factor ($Q_e$)를 추출하여 결정하였고, 다른 공진기들 사이의 커플링 계수는 필터 특성을 고려하면서 물리적 치수를 조정하여 결정하였다. 제작된 hairpin BPF는 probe station에서 probing 방법으로 측정하였고, 중심 주파수와 대역폭은 각각 41.61 GHz 그리고 7.43 %으로 나타났다. 측정된 입력 및 출력 반사 손실은 통과 대역에서 -10 dB 이하 이고 측정된 삽입손실은 -3.94 dB이다. 제작된 여파기의 크기는 $9.1{\times}2.8mm^2$ 이다.

• Journal of Electrochemical Science and Technology
• /
• 제6권4호
• /
• pp.131-138
• /
• 2015

Electrical discharge machining is an unconventional machining process in which successive sparks applied to machine the electrically conductive materials. Any changes in electrical discharge machining parameters lead to the pieces with distinct surface roughness. The electrical discharge machining process is well applied for high hardness materials or when it is difficult to use traditional techniques to do material removing. Furthermore, this method is widely applied in industries such as aerospace, automobile, molding, and tool making. CK45 is one of the important steels in industrial and electrical discharge machining can be considered as a proper way for its machining because of high hardness of CK45 after thermal operation of the electrical discharge machining process. Optimization of surface roughness as an output parameters as well as electrical discharge machining parameters including current, voltage and frequency for electrical discharge machining of CK45 has been studied using copper tools and kerosene as the dielectric. For such a purpose and to achieve the precise statistical analysis of the experiment results design of experiment was applied while non linear regression method was chosen to assess the response of surface roughness. Then, the results were analyzed by means of ANOVA method and machining parameters with more effects on the desired outputs were determined. Finally, mathematical model obtained for surface roughness.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.535-538
• /
• 2003

Liquid crystal molecules with a new fluoro-isothiocyanate moiety were synthesized. They showed remarkably high $T_{NI}$ (>190 $^{\circ}C$), wide mesophase range of 170 $^{\circ}C$, high dielectric anisotropy (>14) and high optical anisotropy (>0.28). New LC Mixtures of the high $T_{NI}$ (>$85^{\circ}C$) was blended with the novel fluoro-isothiocyanate containing LC molecules, phenylcyclohexanes, bicyclohexanes and ester compounds. The LC mixtures show a fast speed (<10ms) of the below one frame rate in 17" WXGA panel.