• E2M - 전기 전자와 첨단 소재
• /
• 제1권1호
• /
• pp.54-61
• /
• 1988

This paper was a study on dielectric phenomena of the specimen, Polypropylene films which were annealled in air and quenched in liquid nitrogen after aging for 5[hr] in water of 100[.deg.C]. The specimen was measured in temperature range of 15-120[.deg.C] and in frequency range of 30-1x 10$^{6}$ [HZ]. As the results of the study, it was confirmed that the tacticity of specimen was isotactic structure, and the degree of cryatallinity of the specimens calculated by means of Natta's method from XRD (X-ray Diffraction) spectrum was 55[%]. And for dielectric relaxation, .betha. peak-the tan .delta. (spectrum around 20[.deg.C])-attributed due to amorphous regions, and .alpha. peak - the tan .delta. spectrum around 90[.deg.C]-due to crystalline regions. It was identified that the degree of crystallinity of the specimen quenched in the liquid nitrogen was increased to 55-65[%], and that of the specimen annealled in the air was decreased to 55-50[%]. And activation energy from dielectric loss spectra was obtained 34.5[kcal/mole] for .alpha. peak and 80.5[kcal/mole] for .betha. peak, respectively.

• 한국진공학회지
• /
• 제5권3호
• /
• pp.229-238
• /
• 1996

The electromigration phenomena and the characterizations of the conductor lifetime (Time-To-Failure, TTF) in Al-1%Si thin film interconnections under D.C. and Pulsed D.C. conditions were investigated . Meander type test patterns were fabricated with the dimensions of 21080$mu \textrm{m}$ length, 3$\mu\textrm{m}$ width, 0.7$\mu\textrm{m}$ thickness and the 0.1$\mu\textrm{m}$/0.8$\mu\textrm{m}$($SiO_2$/PSG)dielectric overlayer. The current densities of $2 \times10^6 A/\textrm{cm}^2$ and $1 \times10^7 A/\textrm{cm}^2$ were stressed in Al-1%Si thin film interconnection s under a D.C. condition. The peak current densities of $2 \times10^6 A/\textrm{cm}^2$ and $1 \times10^7 A/\textrm{cm}^2$ were also applied under a Pulsed D.C. condition at frequencies of 200KHz, 800KHz, 1MHz, and 4MHz with the duty factor of 0.5. THe time-to-failure under a Pulsed D.C.($TTF_{pulsed D.C}$) was appeared to be larger than that under a D.C. condition. It was found that the TTF under both a D.C. and a Pulsed D.C. condition. It was found that the TTF under both a D.C. and a Pulsed D.C. condition largely depends upon the appiled current densities respectively . This can be explained by a relaxation mechanism view due to a duty cycle under a Pulsed D.C. related to the wave on off. The relaxation phenomena during the pulsed off period result in the decayof excess vacancies generated in the Al-1%Si thin film interconnections because of the electrical and mechanical stress gradient . Hillocks and voids formed by an electromigration were observed by using a SEM (Scanning Electron Microscopy).

• 한국결정학회지
• /
• 제13권3_4호
• /
• pp.172-176
• /
• 2002

Pb(Mg /sub 1/3/Nb/sub 2/3/)O₃-PbTiO₃ 계 완화형 강유전체에서 PbTiO₃ 첨가량 변화 및 온도 변화에 따른 상전이 거동을 초전특성 및 유전완화현상 고찰을 통해 고찰하였다. -40∼200℃의 상전이 온도범위에 걸쳐 초전 및 유전특성을 살펴보았으며 특히 Vogel-Fulcher 관계식에 의한 freezing temperature를 도출하였다. 이러한 모든 실험적 결과들로부터 기존에 제안되었던 Pb(Mg /sub 1/3/Nb/sub 2/3/)O₃-PbTiO₃ 고용체 시스템에 대한 상평형도를 다소 수정하여 제안하였다.

• 전기의세계
• /
• 제26권2호
• /
• pp.89-94
• /
• 1977

In order to investigate the properties of radiation resistance together with dielectric, and mechanical relaxation behaviors of polyvinylcholoride exposed to several different doses under the .gamma.-ray of Co$^{60}$ source, several observations were carried out on the exposed specimens propared by mixing dibutyl-tin-dilaulate and dibutyl-tin-dimaleate as stabilizer with or without adding dioctyl-phthalate as plasticizer. Conclusions obtained from the study are as follows: The origin of the absorption band at 1,540-1,640$cm^{-1}$ / on I.R. spectrum seems to be RCOO- ion originated from ionization of the stabilizer, and this peak can be useful as a measure of radiation resistance on polyvinylchloride. Addition of increasing plasticizer to polyvinylchloride exhibits increasing radiation resistance and the reason for this result may be attributed to aromatic resonance absorption of radiation energy by diotylphthalate. On dose dependent dielectric characteristics, nonplastized specimen shows a peak at about 10 Mrad and that this peak disappears on the plastification of specimens. Those phenomena may be explainable in considering the statistical distribution of scissored chain molecular segments as well as the plastification process of plasticizer to polyvinylchloride chain molecules.

• 한국결정학회지
• /
• 제13권3_4호
• /
• pp.165-171
• /
• 2002

고상반응법에 의해 합성된 분말을 $1100^{\circ}C$에서 소결함으로써 밀도가 $9.3g/cm^3$이고 평균입경이 $5.1{\pm}1.2{\mu}$인 $Pb(Fe_{1/2}Ta_{1/2})O_3$를 단일상으로 합성하였다. (공간군: Pm3m) $-150{\sim}50^{\circ}C$에서 측정된 비유전율은 인가전압의 주파수가 1kHz일 때 $-41^{\circ}C$에서 비유전율이 3100으로 최대값을 가지고 유전완화(dielectric relaxation)현상 및 완만한 상전이(diffuse phase transition, DPT)가 뚜렷하게 관찰되는 전형적인 완화형 강유전특성을 보였으며 소결후 $1000^{\circ}C$에서의 열처리 시간이 증가함 에 따라 상전이의 완만화도는 감소하여 정상 강유전체화 하였다. 한편, 소결직후 $Fe^{3+}$와 $Ta^{5+}$ 이온은 투과전자현미경으로도 검출할 수 없는 정도의 단거리 영역에서 화학양론적으로 1 : 1 질서 배열하고 있으며 이러한 B자리 양이온의 질서배열은 열처리 시간이 증가함에 따라 강화됨을 라만분광법으로 확인하였다. 소결직후 $Pb(Fe^{12}Ta_{1/2})O_3$센서의 완화형 강유전특성은 B자리 양이온의 화학양론적 1:1 단거리 질서배열구조와, 열처리한 $Pb(Fe_{1/2}TA_{1/2})O_3$에서의 완화형 강유전특성 감소는 열처리에 따라 강화된 화학양론적 1:1 단거리 질서배열구조와 연관지을 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.33-36
• /
• 2009

In this paper, evaluation of physical properties was made for dielectric relaxation phenomena by the detection of the surface pressures and displacements current on the monolayer films of fatty acid monomolecular Arachidic Acid, Stearic Acid using compressing velocity. LB(Langmuir-Blodgett) thin films were manufacture by detecting deposition for the accumulation and the current was measured after the electric bias was applied across the manufactured MIM device. The physicochemical properties of the fatty acid monomolecular Arachidic Acid, Stearic Acid films surface structure has been studied by AFM. We give pressure stimulation into organic thin films and then manufacture a device under the accumulation condition that the state surface pressure is gas state, liquid state, solid state. Formation that prevent when gas phase state and liquid phase state measure but could know organic matter that molecules form equal and stable film when molecules were not distributed evenly, and accumulated in solid state only.

• 유변학
• /
• 제11권1호
• /
• pp.9-17
• /
• 1999

본 연구에서는 페놀 수지/탄소섬유 복합재료가 상온에서부터 $400^{\circ}C$까지의 온도범위에서 유리 전이와 분해반응을 경험하면서 나타내는 점탄성 특징을 연구하였다. 가교 결합된 페놀메트릭스의 전형적인 유리전이에 따라 저장 탄성율(storage modulus)은 유리전이에 의하여 감소하였고 고무상태(rubbery state)에 도달함과 동시에 후경화 반응과 분해 반응 등을 포함하는 복합적인 고온반응에 의하여 증가하다가, 최대점을 보인 후 다시 감소하는 모습을 보였다. 유리전이 과정은 시간-온도 중첩원리에 따라 해석하였으나, 분해반응이 수반된 고온에서의 점탄성 특징은 저장 탄성율을 수직 및 수평 방향으로 이동시키어 마스터 커브를 완성 할 수 있었다. 이러한 실험적 결과를 토대로 아레니우스식과 Havriliak-Negami식에서 유추된 점탄성 모델을 이용하여 유리전이와 분해반응이 연속적으로 진행되는 과정을 정량적을 해석할 수 있었다. 이때의 완화시간은 유전이 과정을 통하여 감소하다가 고무상태에 이르러 최소값을 보여주고 이후로는 고온반응에 의하여 증가하는 모습을 보여주었다. 본 연구에서 제안된 점탄성 해석 방법은 반응이 수반된 열경화성 복합재료가 보여주는 점탄성 계수의 복잡한 거동을 온도와 주파수(frequency)에 따라 정확하게 묘사함으로서 이 모델링의 유용성을 증명 할 수 있었다.