• 한국정보전자통신기술학회논문지
• /
• 제16권4호
• /
• pp.180-186
• /
• 2023

본 논문은 4세대 VNAND 공정으로 만들어진 고전압 SiO2 절연층 nMOSFET의 n⁺ 및 p⁺ poly-Si 게이트에서의 positive bias temperature instability(PBTI) 열화에 대해 비교하고 각각의 메커니즘에 대해 분석한다. 게이트 전극 물질의 차이로 인한 절연층의 전계 차이 때문에 n⁺/nMOSFET의 열화가 p⁺/nMOSFET의 열화보다 더 클 것이라는 예상과 다르게 오히려 p⁺/nMOSFET의 열화가 더 크게 측정되었다. 원인을 분석하기 위해 각각의 경우에 대해 interface state와 oxide charge를 각각 추출하였고, 캐리어 분리 기법으로 전하의 주입과 포획 메커니즘을 분석하였다. 그 결과, p⁺ poly-Si 게이트에 의한 정공 주입 및 포획이 p⁺/nMOSFET의 열화를 가속시킴을 확인하였다.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권8호
• /
• pp.859-866
• /
• 1996

본 고에서는 절연재료에 대한 개괄적인 성질과 종류에 대해 간단히 설명하고 현재까지 개발되어 실용화 된 신 절연재료들을 소개하고자한다. 재료에 대한 연구는 절연재료 뿐만아니라 초전도재료, 극저온 재료등 특수한 성질을 갖거나 특수한 환경에서 특성을 유지할 수 있는 재료의 개발과 연구에 관심을 기울여야 할 시기라고 판단된다. 또한 기존의 재료에 대한 면밀한 재검토와 연구.고찰을 통해 보다 향상된 특성을 갖는 재료를 개발하는 것은 근본적으로 새로운 재료의 개발과 연구만큼이나 가치있는 일이라는 사실을 항상 명심해야 할 것이다.

• 한국전기전자재료학회논문지
• /
• 제15권1호
• /
• pp.93-101
• /
• 2002

In this study, the stator form-winding sample coils based on silicone resin and polyimide were made for fault prediction and reliability estimation on the C-Class(200$\^{C}$ ) insulation system of traction motors. The complex accelerative degradation was periodically performed during 10 cycles, which was composed of thermal stress, fast rising surge voltage, vibration, water immersion and overvoltage applying. After aging of 10 cycles, the condition diagnosis test such as insulation resistance '||'&'||' polarization index, capacitance '||'&'||' dielectric loss and partial discharge properties were investigated in the temperature range of 20 ∼ 160$\^{C}$. Relationship among condition diagnosis tests was analyzed to find a dominative degradation factor and an insulation state at end-life point.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.763-766
• /
• 2000

In this paper, stator form-winding sample coils based on silicone resin and polyimide were made for fault prediction and reliability estimation on the 200 Class insulation system of traction motors. The complex accelerative degradation was performed by periods during 10 cycles, which was composed of thermal stress, fast rising surge voltage, vibration, water immersion and overvoltage applying. After aging of 10 cycles, condition diagnosis test such as insulation resistance & polarization index, capacitance & dielectric loss and partial discharge properties were investigated in the temperature range of 20∼160$^{\circ}C$. Relationship among condition diagnosis test was analyzed to find an dominative degradation factor and an insulation state at end-life point.

• 한국전기전자재료학회논문지
• /
• 제28권7호
• /
• pp.456-461
• /
• 2015

In this study, the frequency properties of electrostatic capacity and dielectric loss for the samples with different types of filler has been measured in through the applied frequency range of 7 kHz ~3,000 kHz at temperature of $80^{\circ}C$, $110^{\circ}C$, $140^{\circ}C$, $170^{\circ}C$. The results of this study are as follows. When the sample is degradated at the temperature of $80^{\circ}C$, $110^{\circ}C$, $140^{\circ}C$, $170^{\circ}C$ and the frequency range of 7 kHz ~3,000 kHz is applied, It found that the electrostatic capacity of the sample with Polyimide film is larger than the sample with Grass fiber. It found that the dielectric loss for the sample with Polyimide film is larger than the sample with Grass fiber with increasing frequency and temperature in the $80^{\circ}C$, $110^{\circ}C$, $140^{\circ}C$, $170^{\circ}C$ range. Also, the dielectric loss decreased with increasing frequency. In case of the sample with Polyimide film, It found that the electrostatic capacity decreased with increasing temperature, and the dielectric loss gradually decreased with increasing frequency.

• 한국환경과학회지
• /
• 제22권12호
• /
• pp.1561-1569
• /
• 2013

This study carried out a laboratory scale plasma reactor about the characteristics of chemically oxidative species (${\cdot}OH$, $H_2O_2$ and $O_3$) produced in dielectric barrier discharge plasma. It was studied the influence of various parameters such as gas type, $1^{st}$ voltage, oxygen flow rate, electric conductivity and pH of solution for the generation of the oxidant. $H_2O_2$ and $O_3$.) $H_2O_2$ and $O_3$ was measured by direct assay using absorption spectrophotometry. OH radical was measured indirectly by measuring the degradation of the RNO (N-Dimethyl-4-nitrosoaniline, indicator of the generation of OH radical). The experimental results showed that the effect of influent gases on RNO degradation was ranked in the following order: oxygen > air >> argon. The optimum $1^{st}$ voltage for RNO degradation were 90 V. As the increased of $1^{st}$ voltage, generated $H_2O_2$ and $O_3$ concentration were increased. The intensity of the UV light emitted from oxygen-plasma discharge was lower than that of the sun light. The generated hydrogen peroxide concentration and ozone concentration was not high. Therefore it is suggested that the main mechanism of oxidation of the oxygen-plasma process is OH radical. The conductivity of the solution did not affected the generation of oxidative species. The higher pH, the lower $H_2O_2$ and $O_3$ generation were observed. However, RNO degradation was not varied with the change of the solution pH.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제3C권2호
• /
• pp.48-54
• /
• 2003

To evaluate the radiation degradation of ethylene propylene rubber (EPR), radiation effects on EPR were investigated by using dielectric analysis and thermal-gravimetric analysis. Permittivity, loss factor, tan$\delta$, and thermal decomposition temperature were observed for ${\gamma}$-ray irradiated EPR. As the radiation dose was increased, the peak temperature of the loss factor and tans of EPR were increased and loss factor and tan$\delta$ at peak temperature were decreased. Activation energies were calculated using loss factor and thermal decomposition for ${\gamma}$-ray irradiated EPR as well. The trends of both calculated activation energies showed the same tendencies as radiation dose was increased.

• 한국결정학회지
• /
• 제11권4호
• /
• pp.195-199
• /
• 2000

Ceramics based on CaTiO₃-NdAlO₃ solid solutions were synthesized in order to study their dielectric microwave properties. Microstructural analysis was performed with scanning electron microscopy (SEM) and transmission electron microscopy (TEM) using different analytical methods such as energy-dispersive X-ray spectroscopy (EDXS). It was observed that the heating conditions during sintering and cooling strongly affect the microstructural development of CaTiO₃-NdAlO₃-based ceramics. Various types and concentrations of structural defects were identified, for example, dislocations, twins and/or antiphase boundaries. all such defects resulted in a degradation of the dielectric microwave properties, in particular the quality factor Q. Dielectric properties of CaTiO₃-NdAlO₃-based ceramics can be improved by an appropriate thermal treatment of ceramics which results in a decrease in the concentrations of the identified microstructural defects.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.414-419
• /
• 2002

The dielectric breakdown of epoxy composites used for transformers was experimented and then its data were simulated by Weibull distribution probability. First of all, speaking of dielectric breakdown properties, the more hardener increased the stronger breakdown strength at low temperature because of cross-linked density by the virtue of ester radical. The breakdown strength of specimens with filler was lower than it of non-filler specimens because it is believed that the adding filler forms interface and charge is accumulated in it, therefore the molecular motility is raised and the electric field is concentrated. In the case of (idled specimens with treating silane, the breakdown strength become much higher Finally, from the analysis of weibull distribution, it was confirmed that as the allowed breakdown probability was given by 0.1[%], the applied field value needed to be under 21.5 MV/cm.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.132-135
• /
• 2002

A RF amplitude equalizer is designed to improve in-band flatness of Rf filters and/or systems using two dielectric resonators and a 90$^{\circ}$ hybrid. The equalizer has good return loss characteristics and V shaped S$_{21}$ response in passband which is suitable to compensate the ripple degradation due to insufficient quality factors of used resonators or narrow band width of filters or systems. After being connected to the equalizer, a 5-pole BPF at 1957MHz, which has 10 MHz bandwidth and 6㏈ ripple, shows only 1.8㏈ in-band ripple and good in- and out- band matched responses within used hybrid bandwidth without additional matching networks.