• Journal of the Korean Chemical Society
• /
• v.21 no.5
• /
• pp.320-329
• /
• 1977

p-Phenylenediamine dihydroperchlorate, $C_6H_4N_2H_4{\cdot}2HC1O_4$, crystallizes in space group $P\={1}$ with $a=4.79{\pm}0.02,\;b=9.03{\pm}0.02,\;c=7.12{\pm}0.03{\AA},\;{\alpha}=109.4{\pm}0.2,\;{\beta}=79.6{\pm}0.2,\;r=104.6{\pm}0.2^{\circ},\;Z=1$. The structure has been solved by the Patterson and Fourier methods. The refinement by block-diagonal least-squares cycles gives R = 0.13 for 387 observed reflexions collected on equi-inclination Weissenberg photographs with CuK${\alpha}$ radiation. There are two different types of five hydrogen bonds. The first type consists of one trifurcated N${\cdot}{\cdot}{\cdot}$O hydrogen bond and the second of two normal N${\cdot}{\cdot}{\cdot}$O hydrogen bonds, both of which exist between the amino group and the perchlorate, groups. A p-phenylenediamine group is approximately planar within an experimental error and bonded to twelve perchlorates: ten perchlorates forming hydrogen bonds and two being contacted with the van der Waals forces. A perchlorate group is surrounded by six p-phenylenediamines and four perchlorates; among the six p-phenylenediamines, five of them are hydrogen-bonded, and the rest contacted with the van der Waals force.ce anaysis of our samples and investigated the variarions in the values of parameters obtained through fitting the theoretical impedance to the experimental impedance. The characters of the dielectric constant and the impedance showed abnormal variations for the 0.2 at K-doped NSBN ceramics, which we were able to interpret in terms of the variations in the number A-site vacancies with the K doping ratio. From these results, A-site vacancies are thought to be space charges that influence the ferroelectric properties of NSBN ceramics.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.9
• /
• pp.826-834
• /
• 2004

In this paper, we fabricated thick film monopole antennas using Bi$_2$O$_3$-doped BaTi$_4$$O_{9}$ ceramics for small size and broadband intenna. In the result, the high permittivity was fixed and the quality factor was also significantly decreased by the formation of secondary phase of Bi$_4$Ti$_3$O$_{12}$ repleced by addtion Bi. The antenna property influenced by the quality value more than the permittivity. The bandwidth of antenna was increased to 33 %. On the other hand, the gain was reduced to -4.3 dBi. Also radiation patterns were showed low dBi value by increasing of dielectric loss. Specially, Measured x-y plane radiation patterns was distorted as the dispersion of wavelength and high permittivity difference. But the result is showed execellent bandwidth because of low quality value in all formation range.nge.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.1
• /
• pp.24-31
• /
• 2022

This study investigated microstructures, crystal structures, polarization, dielectric and electromechanical properties of 0.76Bi_1/2Na_1/2TiO₃-0.24SrTiO₃ (BNT-24ST)-based piezoceramcs by adding Li₂CO₃ and B₂O₃ (LB) as sintering aids for low-temperature sintering. All samples were successfully synthesized using conventional solid-state reaction method and sintered at 950, 1,000, 1,050, 1,100 and 1,175℃ for 2 hours. Without LB, specimens required sintering temperatures over 1,175℃ for sufficient densification, while the addition of 0.10-mol LB decreased the sintering temperatures down to 950℃. The average grain size and dielectric properties of BNT-24ST-10LB ceramics were enhanced with increasing sintering temperature. We found that the low-temperature sintered BNT-24ST piezoceramics by adding LB showed the d₃₃*value of 402 pm/V at 4 kV/mm after sintering at 1,050℃, which was better than that of high-temperature fired specimens sintered at 1,175℃ without LB (242 pm/V). We believe that the results of this study promise a candidate for low-cost multilayer ceramic actuator applications.

• Journal of the Korean Ceramic Society
• /
• v.38 no.11
• /
• pp.1046-1054
• /
• 2001

Effects of B$_2$O$_3$and CuO addition on the microwave dielectric properties of the PbWO$_4$-TiO$_2$ceramics were investigated in order to use this material as an LTCC material for fabrication of a multilayered RF passive components module. We found that PbWO$_4$could be used as an LTCC material because of its low sintering temperature (8$50^{\circ}C$) and fairy good microwave dielectric properties($\varepsilon$$_{r}$=21.5, Q$\times$f$_{0}$=37200 GHz and $\tau$$_{f}$ =-31 ppm/$^{\circ}C$). In order to stabilize $\tau$$_{f}$ of PbWO$_4$, TiO$_2$was added to the PbWO$_4$and the mixture was sintered at 8$50^{\circ}C$. A near zero $\tau$$_{f}$ value (+0.2 ppm/$^{\circ}C$) was obtained with 8.7 mol% TiO$_2$addition. $\varepsilon$r and Q$\times$f$_{0}$ values were 22.3 and 21400 GHz, respectively. It was believed that the decrement of Q$\times$f$_{0}$ value with TiO$_2$addition was resulted from increasing grain boundary. In order to improve Q$\times$f$_{0}$, various amounts of B$_2$O$_3$and CuO were added to the 0.913PbWO$_4$-0.087TiO$_2$mixture. The optimum amount of CuO was 0.05 wt%. At this addition, the 0.913PbWO$_4$-0.087TiO$_2$ceramic showed $\varepsilon$$_{r}$=23.5, $\tau$$_{f}$ =-2.2ppm/$^{\circ}C$, and Q$\times$f$_{0}$=32900 GHz after sintered at 8$50^{\circ}C$. In case of B$_2$O$_3$addition, the optimum amount range was 1.0~2.5 wt% at which we could obtain following results; $\varepsilon$$_{r}$=20.3~22.1, Q$\times$f$_{0}$=48700~54700 GHz, and $\tau$$_{f}$ =+2.4~+8.2ppm/$^{\circ}C$.

• The Korean Journal of Ceramics
• /
• v.6 no.2
• /
• pp.138-142
• /
• 2000

Thin film $LiNbO_3$MFS (metal-ferroelectric-semiconductor) capacitor showed improved characteristics such as low interface trap density, low interaction with Si substrate, and large remanent polarization. This paper reports ferroelectric $LiNbO_3$thin films grown directly on p-type Si (100) substrates by 13.56 MHz RF magnetron sputtering system for FRAM (ferroelectric random access memory) applications. RTA (rapid thermal anneal) treatment was performed for as-deposited films in an oxygen atmosphere at $600^{\circ}C$ for 60sec. We learned from X-ray diffraction that the RTA treated films were changed from amorphous to poly-crystalline $LiNbO_3$which exhibited (012), (015), (022), and (023) plane. Low temperature film growth and post RTA treatments improved the leakage current of $LiNbO_3$films while keeping other properties almost as same as high substrate temperature grown samples. The leakage current density of $LiNbO_3$films decreased from $10^{-5}$ to $10^{-7}$A/$\textrm{cm}^2$ after RTA treatment. Breakdown electric field of the films exhibited higher than 500 kV/cm. C-V curves showed the clockwise hysteresis which represents ferroelectric switching characteristics. Calculated dielectric constant of thin film $LiNbO_3$illustrated as high as 27.9. From ferroelectric measurement, the remanent polarization and coercive field were achieved as 1.37 $\muC/\textrm{cm}^2$ and 170 kV/cm, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.172-172
• /
• 2009

$BaTiO_3$는 perovskite 구조를 가지는 대표적인 강유전체 재료로서 MLCC(Multi Layer Ceramic Capacitor), PTC thermistor등에 널리 사용되어지고 있다. 최근 고용량 MLCC 의 상업화와 함께 나노크기를 갖는 tetragonal phase의 $BaTiO_3$ 입자를 합성하기 위한 다양한 제조방법이 제시되고 있다. 또한 유전 특성과 온도특성 및 신뢰성을 향상시키기 위해 많은 첨가제들이 연구되어지고 있다. 따라서 이 번 연구에서는 선행 연구를 통해 얻어진 high energy mill을 이용한 고상반응법으로 제조된 $BaTiO_3$를 사용하였으며, 제조된 $BaTiO_3$ 분말에 glass frit를 첨가하여 소결온도 및 유전특성의 변화를 관찰하였다. 제조된 $BaTiO_3$ 분말은 200nm이하의 구형화와 균일한 입자크기를 보였으며, 선행연구를 통해 최적화된 glass frit의 양인 2.53wt%를 첨가하였고 1170, 1200, $1230^{\circ}C$에서 소결하여 소결온도에 따른 변화를 관찰하였다. 실험방법으로는 원료를 혼합하기 위하여 24시간 ball-mill을 이용하여 혼합하였으며, $\Phi15$로 성형하여 소결을 진행하였다. 실험진행 결과 모든 시편에서의 비유전율은 glass frit가 첨가되지 않은 조성보다 높게 나타났으며, $1200^{\circ}C$에서 소결한 시편의 비유전율($\varepsilon_r$)은 2300으로 glass frit가 첨가되지 않은 조성과 비교하여 21% 증가하여 최대치를 나타냈다. 또한 소결온도 $1200^{\circ}C$ 이상에서의 모든 시편에서는 95% 이상의 상대밀도를 나타내어, glass frit가 소결조제로써의 역할을 하는 것으로 나타났다. 따라서 본 연구를 통해 glass frit첨가로 인한 소결온도 감소 및 유전특성이 증가하는 것을 확인 하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.177-177
• /
• 2009

이동통신 시스템의 소형화 경량화 다기능화 추세에 따라 세라믹 모듈의 정밀도 및 집적도가 중요한 요소로 부각되고 있다. 이러한 모듈의 고집적화 추세에 대응하기 위하여 세라믹 소성시 수축율 제어가 필수적인 요소로 부각되고 있으며, 이에 따라 X, Y축의 소성 수축율을 0에 근접하게 제어하는 무수축 소성 기술이 요구되고 있다. 선행연구를 통하여 $Al_2O_3$/Glass/$Al_2O_3$ 구조의 glass infiltration법에 의한 무수축 소성 기술 구현 가능성을 확인하였으나, 아직 해결해야 할 문제점들이 있다. glass가 $Al_2O_3$층으로 infiltration되는 과정에서 glass층이 de-lamination 되는 결함이 발견되었으며 이는 유전체 기판의 Q값을 낮추고 기판의 신뢰성에 악영향을 줄 수 있어 이에 대한 개선이 필요한 실정이다. 본 연구에서는 $Al_2O_3$/Glass/$Al_2O_3$ 구조의 glass infiltration법에 의한 선행 실험에서 관찰된 기판 내부의 de-lamination 현상에 대한 원인을 규명하고 해결책을 제시하고자 하였다. glass 유동과 바인더 burn-out이 동시에 진행됨에 따라 기공이 생성되며 glass가 점성유동함에 따라 이 기공이 glass층으로 모이게 되어 de-lamination 현상이 발생하는 것으로 사료된다. 이를 해결하기 위하여 de-lamination층에 $Al_2O_3$의 tamping을 시도하여 glass층의 기공이 빠져 나갈 수 있는 channel 을 형성하고, 남아있는 기공을 $Al_2O_3$로 채우는 효과를 얻을 수 있었다. 이에 따라 기판의 밀도와 Quality factor 값이 향상되었으며 미세구조가 치밀한 무수축 기판을 제작할 수 있었다.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.3 s.32
• /
• pp.77-82
• /
• 2004

In this paper, warpages of heterogeneous LTCC substrates comprised of high K/low K hi-layered structure were investigated. The effect of glass content in high K LTCC layer on the warpage of substrate during co-firing process was examined. Shrinkage and dielectric properties of high K and low K green sheets were measured. In-situ camber observation by hot stage microscopy showed different camber development of heterogeneous LTCC substrates according to glass content in high K green sheet. High K green sheet containing $50\%$ glass was matched to low K green sheet in the shrinkage. Therefore, LTCC substrate of Low K/High K+$50\%$ glass structure showed flat surface after sintering.

• Journal of the Korean Ceramic Society
• /
• v.39 no.11
• /
• pp.1113-1118
• /
• 2002

Nano sized $(Pb_{0.5}Ca_{0.5})(Fe_{0.5}Nb_{0.5})O_3$ (PCFN) powders with the stoichiometric composition and the uniform size distribution were successfully synthesized by the metal-citrate process through the calcination of the polymeric precursor which consisted of the metal ions and the organic network. The crystallization of the initial amorphous powders began at $400{\circ}$ and completed at $700{\circ}$. The pyrochlore phase was detected caused by the dissociation of PbO above $900{\circ}$. Single phase perovskite PCFN powders with 40 nm size and uniform shape were obtained through the calcination at $700{\circ}$.

• Korean Journal of Materials Research
• /
• v.4 no.4
• /
• pp.401-405
• /
• 1994

The chemical composition and electrical properties were investigated for epitaxially crystallized $(Ba_{0.5}Sr_{0.5})Tio_3$ (BST) films deposited on Pt and $YBa_Cu_3O_{7-x}$(YBCO) electrodes by laser ablation technique. The crystalline quality of the heteroepitaxial BST films deposited on Pt bottom electrode was found to be better than that of BST film on YBCO electrode by the RBS analysis. Films deposited at $600^{\circ}C$ on Pt electrode showed a dielectric constant of 320 and a dissipation factor of 0.023 at 100kHz. Leakage current density of BST films on Pt electrode was smaller than that on YBCO bottom electrode. Their leakage current density was about 0.8$\mu \; A/ \textrm{cm}^2$ at an applied electric field of 0.15MV/cm.