• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.2
• /
• pp.119-126
• /
• 2003

In this paper, a cylindrical cavity resonator oscillator with high Q factor is designed and fabricated to improve the phase noise characteristic. A cavity resonator is coupled to oscillating circuit using aperture hole. Measured results show that the cylindrical cavity resonator oscillator (CRO) for Ku-band has less phase noise than the dielectric resonator oscillator (DRO) with the same oscillating circuit. It has output power of +3.92 dBm at the center frequency 13.4015250 GHz and phase noise of -109 dBc/Hz at 100 kHz offset.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.2
• /
• pp.8-17
• /
• 1992

In this paper a push-push oscillator using DR (dielectric resonator) at K-band is designed and constructed. Two identical oscillators are arranged in a push-push configuration that has the frequency of oscillator that is twice frequency each oscillator. A dielectric resonator is placed at the input of an active two-port device(FET) yielding a stable frequency source. The oscillators realized with this technique exhibit excellent spectral purity and cancellation of fundamental frequency.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.441-446
• /
• 2008

In this papers, a PLDRO(Phase Locked Dielectric Resonator Oscillator) is designed and implemented at the oscillator in which fundamental frequency is 18.3 GHz. The proposed PLDRO so as to improve the PLDRO of the general structure is designed to the goal of the minimize of the size and the performance improvement. Three VCO(Voltage controlled Oscillator) and the power combiner improved the output power. A VCDRO(Voltage Controlled Dielectric Resonator Oscillator) is manufactured using a varactor diode to tune oscillating frequency electrically, and its phase is locked to reference frequency by SPD(Sampling Phase Detector). This product is fabricated on Teflon substrate with dielectric constant 2.2 and device is ATF -13786 of Ka-band using. This PLDRO generates an output power of 5.67 dBm at 18.3 GHz and has the characteristics of a phase noise of -80.10 dBc/Hz at 1 kHz offset frequency from carrier, the second harmonic suppression of -33 dBc. The proposed PLDRO can be used in Ka-band satellite applications

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.2
• /
• pp.174-177
• /
• 2009

In this paper, an oscillator using dielectric-rod loaded cavity resonators with HTS(High Temperature Superconductor) end-plates was presented. It was operated at X-band. A two port cavity resonator was incorporated into a basic feedback loop oscillator configuration. A rutile loaded cavity resonator with HTS thin film end-plates was used to provide the quality factor between $10^4$ and $10^6$. A parallel feedback oscillator was constructed with a dielectric loaded cavity resonator, an amplifier, and a directional coupler. At 300 K, the experimental results showed the phase noise of -108 dBc/Hz at a 100 kHz offset frequency. At 26 K, the results was -118.8 dBc/Hz at same offset frequency.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.385-388
• /
• 2000

In this paper, the Ka-band Dielectric resonator oscillator has been designed and fabricated. The resonator network was simulated using HFSS program. The design method of an oscillator is the small-signal S-parameter design. The Push-push DRO employs a hetero junction FET (NE32484A). The fabricated Push-push DRO shows such characteristics as the phase noise -106 ㏈c/Hz at the 100 ㎑ frequency offset. the output power and fundamental frequency surpression were -6 ㏈m and -29 ㏈c, respectively.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.1
• /
• pp.17-24
• /
• 2014

In this paper, we analysed coupling coefficient between dielectric resonator of high dielectric constant and microstrip line to design for low phase noise dielectric resonator by direct coupling. Also we analysed phase noise of dielectric resonance oscillator with parallel feedback circuit to complement Q by high dielectric constant. We obtained a result from high-stability dielectric oscillator which is optimum designed through analysis of dielectric resonance oscillator phase noise and coupling coefficient. The result is that the phase noise was -83.3dBc/Hz@1KHz at 20.25GHz when we used about 3.6 coupling coefficient and ${\epsilon}_r$=30 dielectric resonator of 20.25GHz dielectric resonance oscillator. As a result, we suggested the direct-connect design method by frequency multiplication mode to prevent phase noise loss at K-Band.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.6 no.2
• /
• pp.27-34
• /
• 1995

In this paper, an X-band TDRO(transistor dielectric resonator oscillator) is designed and experimented with the oscillator constructed. Design of the TDRO is carried out by deriving analycally the coupling parameters between a microstrip line and a dielectric resonator. The coupling parameters take account of the relations among substrate material, ground plane, metallic boundaries surrounding the resonator, distance between a microstrip line and a resonator. Two criteria, external quality factor and coupling coefficient, have been chosen in order to evaluate the performance of the TDRO designed. TDRO studed in this paper may be useful for the application of a microwave system requiring a stable and effective oscillator frequency.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.3 s.118
• /
• pp.241-247
• /
• 2007

This paper introduces a new type push-push harmonic dielectric resonator oscillator. Proposed oscillators are utilized by HDRO(Harmonic Dielectric Resonator Oscillator) which are combined in push-push structure. As a result, fundamental signal suppression ratio and output power of harmonic signal has been improved. The increase of phase noise is compensated by improving coupling characteristic between resonator and parallel microstrip line. The proposed push-push HDRO shows the output power of 9.32 dBm, the fundamental signal suppression of -47.2 dBc and phase noise of -99.86 dBc at 100 kHz offset frequency and 18.7 GHz center frequency.

• 한국정보통신설비학회:학술대회논문집
• /
• 2002.08a
• /
• pp.31-34
• /
• 2002

본 논문은 Ku-band(12.4-18 GHz) 위성통신 시스템 및 이동통신 중계기용 송수신부에 사용되는 고안정도 전압제어 유전체 공진기(Voltage Controlled Dieletric Resonator Oscillator)의 설계 및 제작에 대해 논하였다. 유전체 공진기(Dielectric Resonator)의 등가회로 모델을 이용하여 유전체 공진 발진기(Dielectric Resonator Oscillator)를 설계 알고리즘화 하였다. 유전체 공진 발진기와 바렉터 다이오드를 이용하여 13.4 GHz의 전압 제어 유전체 공진 발진기를 제작하였다. 이때의 출력 전력은 +12dBm이고 위상잡음은 offset 주파수 100kHz에서 -105 dBc/Hz로 측정되었다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.145-149
• /
• 2003

The parallel feedback dielectric resonator oscillator (DRO) which is applicable to satellite communications and broadcasting has been investigated. In the design of oscillator, the phase noise is important parameter. In this paper, The proposed oscillator has good phase noise level because it suppressed harmonics. Measurement show the fabricated oscillator is output power of about 9 dBm at fundamental frequency of 12.0 GHz and fundamental frequency suppression of -47.5 dBc. The phase noise level is about -110 dBc/Hz at 100 KHz offset frequency.