• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1621-1624
• /
• 2008

Transparent ac-PDP test panel was prepared via a combination of materials including ITO sustaining electrodes, thin film dielectric layer and nano-sized phosphor powders. The thin film dielectric layer was prepared by E-beam evaporation process and phosphor layer was deposited on metal mesh pattern by electrophoretic deposition process. The optical transmittance and luminance of the panel indicated that full color transparent ac-PDP is feasible with the approach.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.953-956
• /
• 1997

Micro drilling characteristics by EDM method was investigated. In detail, Micro tool electrode for EDM drilling was machined by use of WEDG method and micro hole was drilled using the machined tool electrode in SUS plate. The machining accuracy and time was compared in a different dielectric fluid. As a result, it was convinced that this method could be utilized as a fabrication technology of micro mold or micro 3 dimensional parts.

• Proceedings of the KIEE Conference
• /
• 2007.11a
• /
• pp.136-137
• /
• 2007

The emission of external incident field or near device field is important factor of EMI and EMC. In this paper, we apply MOM, using the RWG basis function, to analysis the induced current distribution on the PEC and dielectric plates. The volume and surface integral equations are presented for the electromagnetic wave scattering from plate structures composed of dielectric and conducting objects.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.3
• /
• pp.246-252
• /
• 2016

In this paper, reduction of monostatic RCS by DBD plasma is measured. For the calibration of monostatic RCS, S-parameters of two metallic plate in different sizes are used and the result is within 0.4 dB error. Metallic plate is put behind DBD plasma generator for measuring reduction of monostatic RCS by DBD plasma. To prevent arc discharge between metallic plate and DBD plasma generator, measurement is progressed spacing the interval between metallic plate and DBD plasma generator. As a result, maximum reduction of monostatic RCS is about 3 dB at 7.4 GHz.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.4
• /
• pp.659-665
• /
• 2017

Power semiconductor devices required the low on-resistance and high breakdown voltage. Wide band-gap materials opened a new technology of the power devices which promised a thin drift layer at an identical breakdown voltage. The diamond had the wide band-gap of 5.5 eV which induced the low power loss, high breakdown capability, low intrinsic carrier generation, and high operation temperature. We investigated the p-type pseudo-vertical diamond Schottky barrier diodes using a numerical simulation. The impact ionization rate was material to calculating the breakdown voltage. We revised the impact ionization rate of the diamond for adjusting the parallel-plane breakdown field at 10 MV/cm. Effects of the field plate on the breakdown voltage was also analyzed. A conventional diamond Schottky barrier diode without field plate exhibited the high forward current of 0.52 A/mm and low on-resistance of $1.71{\Omega}-mm$ at the forward voltage of 2 V. The simulated breakdown field of the conventional device was 13.3 MV/cm. The breakdown voltage of the conventional device and proposed devices with the $SiO_2$ passivation layer, anode field plate (AFP), and cathode field plate (CFP) was 680, 810, 810, and 1020 V, respectively. The AFP cannot alleviate the concentration of the electric field at the cathode edge. The CFP increased the breakdown voltage with evidences of the electric field and potential. However, we should consider the dielectric breakdown because the ideal breakdown field of the diamond is higher than that of the $SiO_2$, which is widely used as the passivation layer. The real breakdown voltage of the device with CFP decreased from 1020 to 565 V due to the dielectric breakdown.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.227-230
• /
• 2004

Phosphor layers on rear plate of PDP were formed via osmosis coating process in an attempt to improve thickness uniformity of phosphor layer and eventually to enhance luminance and its efficiency of plasma display panel. The phosphor layers were formed uniformly not only on the sidewalls of barrier ribs but also on the dielectric layer of rear plate by the process. The processing parameters affecting the thickness uniformity of the phosphor layer formed by the osmotic coating process were investigated.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.12
• /
• pp.36-42
• /
• 1993

By the variational method, the coplanar waveguide(C.P.W) shielded by two conducting plates has been analyzed. The particular potential solution has been obtained for the boundary conditions in C.P.W. The characteristic impedance and the effective dielectric constant in C.P.W. have been obtained by the variational method using the potential function and the assumed basis function for charge distributions. To consider the effect of the conducting plate in C.P.W. two cases, with and without the top plate, have been analyzed and compared respectively.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.3
• /
• pp.471-481
• /
• 1995

Measurement factors for the dielectric properties of low dielectric loss materials (tan${\dalta}{\le}10^{-4}$) were investigated using the dielectric rod resonator method. It was shown that the relative conductivity (${\sigma}_{r}$) should be controlled within a 5% to obtain the standard deviations of less than 0.07 for permittivity .epsilon.r and 0.06${\times}10^{-4}$ for tan.delta.respectively. Surface resistivity (R$_s$) could be reduced when the surface roughness of parallelled conducting plate was less than 0.07 .mu.m. Measurement error for the permittivity was $\pm$0.02% independent of probe loop size, whereas the error in Q value was reduced with the decrease in probe loop size and also with the increase in the absolute values of Q. Reliable Q values were determined with the probe loop size of less than 4mm. The accurate for the distance between the measuring probe loop and the sample could be obtained when the insertion loss of resonant frequency ranged -15dB - -30dB.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.6 no.2
• /
• pp.73-82
• /
• 2003

For measurements and analysis of dielectric characteristics of planar slabs of microwave absorbing materials, I have applied a free-space method in the frequency range of 8~14 GHz. The measurement system for free-space method consists of transmit and receive antennas, mode transitions, precision coaxal cables, the network analyzer, and a computer Special Spot-focused horn lens antenna was used to eliminate diffraction effects. Diffraction effects at the edges of the sample are minimized by satisfying the condition for minimum transverse dimension of the plate and the beamwidth of the antennas at the focus. The time-domain gating feature of the network analyzer and the thru, reflect, and line(TRL) calibration technique were used to eliminate the effects of undesirable multiple reflections. The complex coefficients of reflection and transmission, $S_{11}$ and $S_{21}$, of planar samples were measured for standard materials such as Teflon, Rexolite$\textregistered$ 2200. The results were compared with existing measurement method. And I applied a free-space method for measurement to measure dielectric constants of some electromagnetic absorbing materials. Dielectric properties for the same samples were also measured with a 7mm coxial transmission line method for purposes of comparison with the free-space method.

• ETRI Journal
• /
• v.38 no.5
• /
• pp.879-884
• /
• 2016

In this paper, an ultra-small marker beacon antenna operated in the VHF-band is proposed. This antenna has a modified linear IFA structure with a lumped capacitor and a capacitive plate for frequency tuning and impedance matching. The capacitive plate is directly connected to the end of a linear radiator and is separated from the antenna ground by 1 mm. The main operating frequency is mainly controlled by the size and dielectric constant of the capacitive plate. The lumped capacitor is useful for fine frequency tuning. Using the proposed structure, an ultra-small marker beacon antenna can be realized with a length of 0.04 ${\lambda}_0$.