• 제목/요약/키워드: Dielectric Plate

검색결과 183건 처리시간 0.017초

보이스코일 액츄에이터로 이송되는 미세구멍 가공용 방전 가공기의 작동특성 연구 (A Study on the Performance Evaluation of a Voice Coil Actuator for Electro-Discharge Micro-Drilling Machine)

  • 양승진;백형창;김병희;장인배
    • 한국정밀공학회지
    • /
    • 제18권12호
    • /
    • pp.152-158
    • /
    • 2001
  • In this paper, we have developed an electro discharge machine for micro drilling driven by a voice coil actuator. Because the voltage signal of the electro-discharging circuit shows a lot of peaks and valleys, the active type low-pass filtering technique is adopted to get the average of the signal. Since the motion of the voice coil is precisely controlled by the error value between the object voltage value and the measured one, it is possible to prevent the mechanical contact between the rotating electrode and the workpiece and to maintain the appropriate machining conditions during the process. The electro-chemical machining technology was also adopted to make small diameter electrodes. Pure water is used as a dielectric. The machining procedure is performed to verify the feasibility of the developed system. It takes about 10 seconds to drill the ${\phi}m$100${\mu}m$ hole to the 100${\mu}m$ thickness stainless steel plate. The machining time depends on the values of the resister and the capacitor. There may exist the optimal values of time constant and the tendency is displayed In the appendix.

  • PDF

새 구조의 액정 엑스선 감지기 (A New X-Ray Image Sensor Utilizing a Liquid Crystal Panel)

  • 노봉규
    • 한국광학회지
    • /
    • 제19권4호
    • /
    • pp.249-254
    • /
    • 2008
  • 새 구조의 액정 엑스선 감지기를 만들었다. 이것은 액정판을 만들고 유리판을 얇게 식각한 다음, 그 유리판 위에 반사막과 광전도층을 연속하여 입힌 구조이다. 새 구조의 액정엑스선 감지기는 공정의 안정성, 대면적화, 감도 등에서 이미 상품화된 엑스선 감지기와도 충분히 경쟁할 수 있으며, 따라서 성공적으로 상용화 할 수 있음을 확인했다.

UHF 대역 공진 주파수 및 반사 손실 오토튜닝 마이크로스트립 안테나 설계 (Design of UHF Band Microstrip Antenna for Recovering Resonant Frequency and Return Loss Automatically)

  • 김영로;김용휴;허명준;우종명
    • 한국전자파학회논문지
    • /
    • 제24권3호
    • /
    • pp.219-232
    • /
    • 2013
  • 본 논문에서는 손과 같은 물체가 안테나에 접근하였을 때 이탈된 공진 주파수와 임피던스를 자동으로 복원하여 무선기기의 송수신 성능을 항상 최적의 상태로 유지하도록 할 수 있는 UHF 특정 소출력 무선주파수 대역(425 MHz)의 소형 마이크로스트립 안테나를 설계, 제작하였다. 반파장 마이크로스트립 방사체의 양쪽 끝단을 접지면 쪽으로 폴딩하여 소형화하고, 역시 방사체와 접지면 사이에 바랙터 다이오드에 의한 캐패시턴스를 장하한 다음, 각각 역바이어스 전압 조절에 의한 용량을 비대칭적으로 변화시킴으로써, -30 dB 이하의 일률적인 반사 손실을 유지하면서 395 MHz에서 455 MHz까지 연속적인 공진 주파수 조절이 가능한 전압 제어 안테나를 설계하였다. RF 모듈로부터 시험 신호를 안테나에 송출하여, 부정합에 의해 안테나로부터 되돌아 온 반사 신호 레벨을 RSS(Receive Signal Strength) 검출 회로와 오프셋 증폭기를 통하여 마이크로콘트롤러에 입력하고, 그 레벨이 최소가 되도록 안테나의 바이어스 전압을 자동 조절하는 펌웨어를 설계, 시스템을 완성하여 시험한 결과, 손, 금속판, 유전체 등의 물체를 접근시켰을 때 틀어졌던 안테나의 특성이 수 초 이내에 완전하게 복원됨을 확인하였다.