• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 The 8th Asian Symposium on Precision Forging ASPF
• /
• pp.152-157
• /
• 2003

A typical die-set for enclosed-die forging of half axle gears in double action hydraulic press is presented, the important factors those influence on precision forming of half axle gears are analyzed, warm forming process of half axle gears is simulated by FEM software $DEFORM\_3D$. The results show, that proper die structure and dimension, suitable web thickness and position can improve material filling, ensure full filling of tooth cavity.

• 한국산학기술학회논문지
• /
• 제11권2호
• /
• pp.420-425
• /
• 2010

온간단조(warm forging) 가공은 가공소재(Billet)를 $800^{\circ}C$ 정도로 가열하여 금형의 다이블록 임프레션(impression) 상면(上面)에 위치결정 시켜 단조하고 있는데, 이 단조가공 과정에서 산화스케일의 비산에 따른 작업자의 화상에 대한 위험도와 산화스케일이 다이블록의 임프레이션에 부착 되거나 열처리기술 미흡으로 금형수명(die life)을 단축시키며 다이블록 안에 분무하는 이형제는 유해먼지, 유해증기, 미스트, 퓸, 악취 등을 발생시켜 작업장 환경을 오염시킴으로써 직무기피 직종으로 분리되기 때문에 생산량 목표 달성에 큰 문제점으로 대두 되고 있다. 더욱이 다이블록의 임프레이션 마멸부위를 수리보수하기 위한 재생공법의 미흡으로 납기지연, 금형비 상승의 요인으로 나타나므로 이에 대한 재생공법 개선과 작업장의 공해물 제거장치의 개발이 요망되고 있다. 본 연구에서는 황동제 관 이음쇠의 온간단조가공에서 도출된 빌릿가열시 문제점, 금형재생 보수시 문제점, 제조원가의 상승요인 등을 외국의 기술과 비교하여 온간단조 금형제작방법개선, 금형재생보수공법 개선, 유해가스 제거장치를 도입하여 환경친화형 작업장 개선 등으로 문제점을 해결 하고자 하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권7호
• /
• pp.729-734
• /
• 2015

본 연구는 내경부에 깊은 구멍이 있는 컵형상의 대형단조품을 형단조와 자유단조 공법을 복합하여 성형하기 위한 단조공법 개발에 관한 것이다. 제안된 단조공법은 형단조를 이용하여 예비성형체를 성형하고 코깅 공법을 이용하여 후방압출 형상을 성형하는 방법이다. 유한요소해석에서 제안된 공법이 후방압출공법에 비하여 낮은 성형하중으로 더 높은 유효변형율을 나타내었다. 제안된 공법으로 시제품을 제작하여 내부품질이 양호한 제품을 적은 용량을 프레스로 성형할 수 있음을 확인하여 제안 공법의 타당성을 검증하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.47-50
• /
• 2003

Hot-forging Process and die design was made for a large-scale compressor wheel of Ti-6Al-4V alloy with 2-D FE analysis. The design integrated the geometry-controlled approach and dynamic materials modelling(DMM). In order to obtain the processing contour map of Ti-6Al-4V alloy based on DMM, compression tests were carried out in the temperature range of 915$^{\circ}C$ to 1015$^{\circ}C$ and the strain range of 10$\^$-3/s$\^$-1/ to 10s$\^$-1/. In the die design of the compressor wheel using the rigid-plastic FE analysis, forging dimensional accuracy, the capacity of the forging machine and defect-free forging were considered as main design factors. The microstructure of hot forged wheel using the designed die showed a typical alpha-beta structure without forging-defects.

• 소성∙가공
• /
• 제18권7호
• /
• pp.513-518
• /
• 2009

Large load is required in forging of large-scale components which becomes a critical restriction in practice. In the present study, two methods of incremental forging were investigated for the purpose of reducing the load required for forging of large and thick plates. The forging was applied primarily to obtain fine grains by imposing large amount of plastic deformation to the plates. One was to use nine strokes with a flat die and the other was to use three strokes with a curved die. The die moves vertically in the former while it moves vertically as well as rolls horizontally in the latter. Deformation of the slab in each case was analyzed by rigid-plastic finite element method and as a result, variations of load and slab holding force, and distributions of effective strain and thickness were predicted.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1570-1575
• /
• 2007

The cold-forging process analysed in this paper deals with the cam bolt of a nonaxisymmetric shape which mainly is used as a part in the steering system of a vehicle for the purpose of adjusting shock absorb. So both strength and endurance are very important for the cam bolt. In this study, cam bolt forging process is composed of four stage processes. For three forging stages, shape of workpiece will be eccentrical. And then bolt head and washer of eccentrical shape is created in last stage. 3D finite element analysis repeatedly has been performed with changing dimension of die to obtain adequate former multi forging process and die shape. Simulation results reviewed have influence on deciding design of die and forging process. As a result, Simulation results have provided a direction to improve the process.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 금형가공 심포지엄
• /
• pp.43-53
• /
• 1998

Heat - affected zones degenerated in cold forging die have been investigated to improve the tool life. There are many cases of heat-affected zone which are degenerated in manufacturing die and using the cold forging process. In order to define amounts of grinding inmanufacturing the toolfor cold forging, we have investigated the hardness and microstructure of surface layer after EDM. Considering the results of T.R.S. and compression test, it is likely that mechanical properties of tool have been decreased sharply if the heat-affected zones degenerated by EDM were not machined properly. also analyzed the tool surfac which is fractured during the cold forging. According to the microstructures and hardness distribution, surface of many tools have been degenerated in cold forging and fractured due to the heat-affected zone.

• 소성∙가공
• /
• 제13권2호
• /
• pp.142-147
• /
• 2004

Three-dimensional rigid-plastic finite element analysis has been performed to optimize open die forging process to make round bar. In the round bar forging, it is difficult to optimize process parameters in the operational environments. Therefore in this study, finite element method is used to analyze the practice of open die forging, focusing on the effects of reduction, feeding pitch and rotation angle for optimal forging pass designs. The soundness of forging process has been estimated by the smoothness and roundness of the bar at various combination of feeding pitches and rotation angles. From the test result, process conditions to make round bar having precise dimensional accuracy have been proposed.

• 소성∙가공
• /
• 제32권1호
• /
• pp.5-11
• /
• 2023

The aim of this study is to manufacture an aluminum pipe yoke of automotive steering system for lightweight. In a multistage cold forging process for aluminum pipe yoke, the surface defects frequently occur due to excessive deformation or friction during extrusion process for forming hollow pipe part. It is import to reduce the friction between the material and the forging die. This study investigated a multistage forging process with sliding die to reduce friction for aluminum pipe yoke. After evaluating by FE analysis, the forging experiment with the sliding die was carried out. As a result, it was possible to manufacture a sound aluminum pipe yoke.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.199-203
• /
• 2003

Idler of excavator are large product with diameter 500 - 600 mm and parts of a power transmit device. The object of the paper is developed large products by hot closed-die forging. The forging process which is proposed from numerical analysis and various tests is developed a large products with good quality. To estimate the design process parameters such as working load, temperature and flash thickness so on, numerical analysis are used by DEFORM 2D. To obtain a flow stress data and optimal forging temperature is carried out hot compression and tensile test at a various temperature range. Developed product is tested mechanical properties of elongation, hardness and tensile strength so on. Test results are presented excellent mechanical properties.