Journal of Advanced Marine Engineering and Technology

The Korean Society of Marine Engineering (한국마린엔지니어링학회)
권호 표지
DOI QR코드

DOI QR Code

Forging process design of cup shaped large forging using finite element method

유한요소해석을 통한 컵형상 대형단조품의 성형공법 설계

  • Received : 2015.07.27
  • Accepted : 2015.09.08
  • Published : 2015.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

This research developed a new deep-bore, cup-shape, large forging process by combining die forging and free forging methods. In the proposed process, a preform for cup-shape large forging is produced by die forging, and a product with a deep bore is finally manufactured using an open die forging method, which is generally produced using a backward extrusion process. Finite element analysis results showed a higher effective strain distribution with a smaller forging load using the proposed method compared to the backward extrusion method. The production of a prototype with good internal quality using a small press capacity verified the proposed method.

본 연구는 내경부에 깊은 구멍이 있는 컵형상의 대형단조품을 형단조와 자유단조 공법을 복합하여 성형하기 위한 단조공법 개발에 관한 것이다. 제안된 단조공법은 형단조를 이용하여 예비성형체를 성형하고 코깅 공법을 이용하여 후방압출 형상을 성형하는 방법이다. 유한요소해석에서 제안된 공법이 후방압출공법에 비하여 낮은 성형하중으로 더 높은 유효변형율을 나타내었다. 제안된 공법으로 시제품을 제작하여 내부품질이 양호한 제품을 적은 용량을 프레스로 성형할 수 있음을 확인하여 제안 공법의 타당성을 검증하였다.

Keywords

References

  1. S. P. Dudra and Y. T. Im, "Investigation of metal flow in open-die forging with different die and billet geometries," Journal of Materials Processing Technology, vol. 21, no. 2, pp. 143-154, 1990. https://doi.org/10.1016/0924-0136(90)90003-D
  2. S. K. Choi, M. S. Chun, and C. J. Van Tyne, "Optimization of open die forging of round shapes using FEM analysis," Journal of Materials Processing Technology, vol. 172, no. 1, pp. 88-95, 2006. https://doi.org/10.1016/j.jmatprotec.2005.09.010
  3. D. Y. Kim, Y. D. Kim, D. K. Kim, and J. D. Kim, "A study on the open die forging preform shape of crank throw for large ship engines," Proceedings of Korean Society for Technology of Plasticity Conference, pp. 191-194, 2003 (in Korean).
  4. S. K. Choi, W. T. Kim, M. S. Chun, and Y. H. Moon, "Effect of process parameters on cylindrical open die forging," Proceedings of Korean Society for Technology of Plasticity Conference, pp. 221-224, 2003 (in Korean).
  5. M. Knap, G. Kugler, and H. Palkowski, "Prediction of material spreading in hot open-die forging," Steel Research International, vol. 75, no. 6, pp.405-410, 2004. https://doi.org/10.1002/srin.200405787
  6. K. Tamura, M. Akiyama, and J. Tajima, "Optimization of anvil design for ensuring dimensional precision of forged round billet without forging defects by three-dimensional rigid-plastic finite element analysis," International Journal of Engineering Science, vol. 219, pp. 461-475, 2005.
  7. K. Tamura and J. Tajima, "Optimization of open-die forging process design to ensure homogeneous grain size refinement of cast structures by three-dimensional rigid-plastic finite element analysis," Journal of Mechanical Science and Technology, vol. 218, no. 9, pp. 931-946, 2004.
  8. Y. C Kwon, J. H Kang, and S. S Kim, "A door frame for wind turbine towers using open-die forging and ring-rolling method," Transactions of the Korean Society of Mechanical Engineers A, vol. 39, no. 7, pp. 721-727, 2015 (in Korean). https://doi.org/10.3795/KSME-A.2015.39.7.721
  9. M. W. Kim, J. R. Cho, and D. Y. Kim, "A study on the development of integral forging process for cask of nuclear fuel," Proceedings of Korean Society for Technology of Plasticity Conference, pp. 369-372, 2006 (in Korean).

Cited by

  1. 난성형 T형상 알루미늄 부품의 성형공정 해석 및 실험 vol.20, pp.2, 2015, https://doi.org/10.21289/ksic.2017.20.2.141