• Restorative Dentistry and Endodontics
• /
• 제39권4호
• /
• pp.276-281
• /
• 2014

Objectives: The purpose of this study was to compare the cutting efficiency of a newly developed microprojection tip and a diamond-coated tip under two different engine powers. Materials and Methods: The apical 3 mm of each root was resected, and root-end preparation was performed with upward and downward pressure using one of the ultrasonic tips, KIS-1D (Obtura Spartan) or JT-5B (B&L Biotech Ltd.). The ultrasonic engine was set to power-1 or -4. Forty teeth were randomly divided into four groups: K1 (KIS-1D / Power-1), J1 (JT-5B / Power-1), K4 (KIS-1D / Power-4), and J4 (JT-5B / Power-4). The total time required for root-end preparation was recorded. All teeth were resected and the apical parts were evaluated for the number and length of cracks using a confocal scanning micrscope. The size of the root-end cavity and the width of the remaining dentin were recorded. The data were statistically analyzed using two-way analysis of variance and a Mann-Whitney test. Results: There was no significant difference in the time required between the instrument groups, but the power-4 groups showed reduced preparation time for both instrument groups (p < 0.05). The K4 and J4 groups with a power-4 showed a significantly higher crack formation and a longer crack irrespective of the instruments. There was no significant difference in the remaining dentin thickness or any of the parameters after preparation. Conclusions: Ultrasonic tips with microprojections would be an option to substitute for the conventional ultrasonic tips with a diamond coating with the same clinical efficiency.

• 해운물류연구
• /
• 제34권4호
• /
• pp.695-710
• /
• 2018

한진해운 도산이후, 한국해운의 재건을 위한 방안의 하나로 제시된 해운조선 상생 발전에 대한 실천적 대안의 하나인 해사클러스터 구축에 대한 정책대안 마련이 본 논문의 목적이다. 이를 위하여 가장 성공적인 해사클러스터를 구축하고 해운 조선 조선기자재 금융 등 핵심구성요소들간에 상생을 위한 협력이 이루어지고 있는 일본의 이마바리해사클러스터에 대하여 포터의 다이어몬드모델을 활용하여 분석하였다. 이마바리 해사클러스터는 해운과 조선간의 협력을 바탕으로 하는 국내완결형 수요조건과 관련지원산업조건을 갖추었다. 생산요소조건은 가족경영을 기반으로 하는 뛰어난 해운경영자와 이들을 하나로 묶어주는 행정과 금융을 기반으로 하고 있지만 지방중소도시에 위치한 근본적인 약점으로 우수한 인재확보나 대형항만부재로 인한 항만서비스업의 부진은 약점으로 들 수 있다. 기업전략조건은 단기적인 시점보다는 장기적인 시점에서 안정경영을 중시하고 있다는 점을 확인할 수 있었다.

• 한국콘텐츠학회논문지
• /
• 제22권10호
• /
• pp.22-38
• /
• 2022

최근 코로나 19 장기화로 인한 발달장애 시설 임시 폐쇄와 격리 등으로 수요자가 겪는 고통이 심해지고 있으며, 입원 서비스에 대한 정보도 미흡한 상황으로 뚜렷한 해결책이 보이지 않고 있다. 따라서 수요자를 위한 제도적, 심리적 문제를 예방할 수 있는 서비스 체계가 필요하다. 본 연구의 목적은 발달장애 자녀와 보호자를 위해 체계적인 입원 치료 가이드 및 퇴원 후 관리와 올바른 교육을 제공하고자 한다. 국내 서비스 사례분석을 통해 수요자들의 요구와 개선 요소를 도출한 뒤, 더블 다이아몬드 방법론을 활용하여 실수요자들과 함께 Co-creation을 진행하였으며, 입원 전부터 퇴원 후까지 알기 쉬운 치료 여정과 올바른 정보와 소통을 할 수 있는 서비스 콘셉트를 도출하였다. 이에 따른 협업 공유 애플리케이션 서비스를 제안하였으며, 다양한 이해관계자들의 사용성 평가 및 검증을 통하여 서비스의 유용성을 확인하였다. 본 연구 결과가 사용자경험 중심의 발달장애 병동 보조 시스템 개발에 활용되기를 기대한다.

• Restorative Dentistry and Endodontics
• /
• 제46권4호
• /
• pp.60.1-60.8
• /
• 2021

Objectives: The aim of this study was to verify the match between 5 shades of composites from different manufacturers with a shade guide and among the systems using a portable spectrophotometer. Materials and Methods: Shade measurements were performed on specimens of Z350 XT (3M ESPE), Charisma Diamond (Heraeus Kulzer GmbH), Esthet X-HD (Dentsply Caulk), and Empress Direct (Ivoclar-Vivadent) for shades A1, A2, A3, B1, and C3 using a Vita Easyshade spectrophotometer (Vita Zahnfabrik) against a white background. Corresponding shades of Vitapan Classical (Vita Zahnfabrik) guide were measured likewise and shade variation (ΔE) was calculated based on International Commission on Illumination L^*a^*b^* parameters. The ΔE of the composites in each shade was compared by one-way analysis of variance and Tukey's post hoc test (α = 0.05). Results: All composites presented ΔE > 3.7 compared with the shade guide. Variation in shades A3, B1, and C3 was significantly different for all composites. ΔE of Z350 XT was significantly lower for A1 than for the other shades, whereas ΔE of Z350 XT and Charisma Diamond were significantly lower for A2 than for the other shades. Conclusions: No composite shade matched with the shade guide. Equivalent shades of the restorative composite from different manufacturers may show clinically noticeable ΔE.

• 환경생물
• /
• 제38권4호
• /
• pp.507-517
• /
• 2020

본 연구에서는 외부형태적으로 매우 비슷한 참조기(Larimichthys polyactis) 와 부세(L. crocea)의 두 종 간 구분을 위해 계측형질 분석을 포함한 몇가지 기법들을 수행하였다. 총 48개의 계측형질 중 4개의 유의한 차이를 보이는 계측형질이 파악되었으며(p<0.05) classical dimension에서는 유의한 차이를 보이는 계측형질은 없었다(p>0.05). 오히려, 2가지의 truss dimension(Insertion of dorsal fin base origin of pectoral fin base와 Origin of anal fin base - origin of pectoral fin base)와 2가지의 head part dimension (Most anterior extension of the head - above of eye와 Above of eye posterior aspect of operculum)에서는 유의한 차이가 나타났다(p<0.05). 하지만, 이러한 4가지 계측형질 중 head part dimension의 Above of eye - posterior aspect of operculum의 계측형질을 제외한 나머지 3가지 계측형질들에서 부세가 참조기에 비해 더 큰 수치를 나타내었다(p<0.05). X-ray 분석 결과 curved vertebral column에서 부세는 45.1±2.34°로 참조기의 38.4±1.82°에 비해 8.4% 더 큰 수치를 나타내었다(p<0.05). 머리부위의 표피를 제거한 후의 유상돌기는 두 종에 모두 존재하여 일반적으로 참조기에서만 유상돌기가 존재한다고 알려진 바와는 달리, 유상돌기는 두 종을 구분하기 위한 형질로 볼 수 없었다. 본 연구 결과는 참조기와 부세에서 일부 외부 체형에 의해 명확히 구분 가능함을 시사한다.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권3호
• /
• pp.423-431
• /
• 2016

In this study, wing design optimization for long-endurance unmanned aerial vehicles (UAVs) is investigated. The fluid-structure integration (FSI) analysis is carried out to simulate the aeroelastic characteristics of a high-aspect ratio wing for a long-endurance UAV. High-fidelity computational codes, FLUENT and DIAMOND/IPSAP, are employed for the loose coupling FSI optimization. In addition, this optimization procedure is improved by adopting the design of experiment (DOE) and Kriging model. A design optimization tool, PIAnO, integrates with an in-house codes, CAE simulation and an optimization process for generating the wing geometry/computational mesh, transferring information, and finding the optimum solution. The goal of this optimization is to find the best high-aspect ratio wing shape that generates minimum drag at a cruise condition of $C_L=1.0$. The result shows that the optimal wing shape produced 5.95 % less drag compared to the initial wing shape.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.833-836
• /
• 2007

Load/Unload technology has more benefits than the conventional CSS technology. However, it remains unsolved technical problem on the unloading process. While the slider climbs up the ramp at the outer edge of the disk, the possibility of the slider-disk contact by lift-off force and rebound of the slider increases. This paper focuses on no slider-disk contact. To prevent the slider-disk contact, we apply the disk bump on disk outer edge proceeding unload. Firstly, in the simulation, the bump dimension is determined by changing bump design parameters. Secondly, dynamic stability of slider have to be checked on disk bump before unload analysis, and unload analysis is performed by applying stable bump shapes to unload simulation. Thirdly, we select optimal bump shape to improve unload performance by unload analysis. Finally, in the experiment, the disk bump is mechanically manufactured by pressing disk surface using diamond tip. That is variously processed by changing pressing pressure. After confirming bump shape by nano-scanner, proper bump shape is applied to real experimental unload process. Through this investigation, we propose the optimal bump design to prevent the slider-disk contact, and then we can realize improved unloading performance.

• 대한기계학회논문집A
• /
• 제28권7호
• /
• pp.915-922
• /
• 2004

A stent is small tube-like structure expanded into stenotic arteries to restore blood flow. The stent expansion behaviors define the effectiveness of the surgical operation. In this paper, finite-element method was employed to analyze expansion behaviors and fatigue life of a typical diamond-shaped balloon-expandable stent. Beyond safety considerations, this type of analysis provides mechanical properties that are often difficult to obtain by experiments. Mechanical properties of the stent expansion pressure, radial recoil, longitudinal recoil and foreshortening were simulated using commercial FEM code, ANSYS and fatigue life were estimated using NISAII ENDURE. The FEM results showed that the pressures necessary to expand the stent up to a diameter of 3mm, 4mm and 5mm were 0.75MPa, 0.82MPa and 0.97MPa. The fatigue lifes according to expansion diameter were 114${\times}$10$^{7}$cycles, 714${\times}$$^{6}$cycles and 163${\times}$10$^{6}$cycles. As a result, a finite element model used in this study can simulate expansion behaviors of stents and should be useful to design new stents or analyze actual stents.

• Current Optics and Photonics
• /
• 제1권5호
• /
• pp.538-543
• /
• 2017

Progressive addition lenses (PAL) have very wide application in the modern glasses market. The unique progressive surface can make a lens have progressive refractive power, which can meet the human eye's different needs for distance-vision and near-vision. According to the national glasses fabrication standard, the difference between actual optical power after fabrication and nominal design value should be less than 0.1D over the lens effective area. The optical power distribution of PAL is determined directly by the surface. Consequently, the surface processing accuracy requirement is proposed. Beginning from the surface expressions of progressive addition lenses, the relationship equations between the surface sag and optical power distribution are derived. They are demonstrated through tolerance analysis and test of an example progressive addition lens with addition of 2.09D (5.46D-7.55D). The example addition surface is fabricated under given accuracy by a single-point diamond ultra-precision machine. The optical power of the PAL example is tested with a focal-meter after fabrication. The optical power addition difference between test result and design nominal value is 0.09D, which is less than 0.1D. The derived relationship between the surface error and optical power is verified from the PAL example simulation and test result. It can provide theoretical tolerance analysis proof for the PAL surface fabricating process.

• 한국산업융합학회 논문집
• /
• 제23권6_2호
• /
• pp.935-941
• /
• 2020

In this study, the effect of different shapes on the heat dissipation characteristics of other porous frames on LED lighting frames was studied using finite element analysis. In addition, the heat transfer characteristics of LED frames were tested using a thermal imaging camera and the results of finite element analysis were compared to derive the optimal hole shape. According to the study, the heat dissipation effect was better for frames with hole compared to existing ones without holes. In particular, the heat dissipation characteristics test showed that for frames with holes, the rise time to the maximum temperature is fast and the maximum temperature is significantly lower. Also, we could see that the square and diamond shapes were smaller than the circular pores, but had a greater heat dissipation effect. Through this study, we have concluded that there is a limit to increasing the heat dissipation effect of the frame with a perforated shape, and it is necessary to conduct further research on the change in the shape of the frame in order to achieve a better heat dissipation effect in the future.