• Journal of Korean Society of Forest Science
• /
• v.100 no.3
• /
• pp.402-407
• /
• 2011

The objectives of this study were to analyze the crown vertical structure, crown bulk density, and to develop regression models for predicting crown fuel load using the data from 10 destructively sampled Pinus densiflora trees in Bonghwa, Gyeongbuk. The fuel loads were observed higher in the middle portion of the vertical distribution of crown followed by the lower portion and upper portion of Pinus densiflora, respectively. Approximately 25% crown fuel load was found in the needle while 33% was observed in the branches with <1 cm diameter with a total of 58% available fuel loads. The average crown bulk density was $0.45kg/m^3$, and $0.27kg/m^3$ of this was available in the needles and branches with <1 cm diameters. The resulting models in linear equations were able to account for 84% and 88% of the observed variation, while the allometric equations with diameter at breast height as the single predictor showed better results to account for 90% and 95% of the observed variation in the available crown fuel loads and total crown fuel loads, respectively. The suggested equations in this study could provide quantitative fuel load attributes for crown fire behavior models and fire management of red pine stands in Bonghwa areas.

• Korean Journal of Environment and Ecology
• /
• v.35 no.6
• /
• pp.632-643
• /
• 2021

The objective of this study was to examine vegetation community structure and distribution of Fraxinus chiisanensis in Mt.Minjuji of Chungcheongbuk-do by setting up and surveying 8 plots (400 m² each). Mean Importance Value (MIV) of Fraxinus chiisanensis in 8 plots was 35.19% in average (ranging from 26.07~42.74%). Since it is the dominant species in all plots, it is expected to maintain the present vegetation structure. The analysis of the DBH (diameter at breast height) showed that the diameter of Fraxinus chiisanensis in Mt.Minjuji ranges from 2 to 43cm. The majority of Fraxinus chiisanensis is expected to maintain current state unless disturbance or rapid environmental change occurs. The Species Diversity (H') was 0.8498~1.0261, Evenness (J') was 0.8160~0.9256, Dominance Index (D) was 0.0789~0.1840, Maximum Diversity (H'max) was 1.0414~1.2041. The analysis of annual ring and radial growth showed that the average age of Fraxinus chiisanensis in Mt.Minjuji was 29.1years(ranging from 22~58years). The average annual radial growth of Fraxinus chiisanensis was the highest in community G with 5.84mm and the lowest in community B with 2.80mm. The similarity index analysis revealed that the similarity index between community B and E, C and F, H was the highest with 69.0%, and the similarity index between community E and F was the lowest with 29.6%. Both the area of Fraxinus chiisanensis community of Mt.Minjuji and its population size are very small. Therefore, this area needs to be designated as Forest Genetic Resource Reserve.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.2
• /
• pp.90-95
• /
• 2004

Pitch pine (Pinus rigida) has been planted in Korean forests for several decades, primarily for erosion control and use as a fuel supply. To enhance its value, and especially potential use as lamina for structural glued laminated timber (glulam), log quality and lumber yield of pitch pine were evaluated in this study. Trees from pure pitch pine stands with an average diameter at breast height of 32 cm were felled and bucked into 3.6m long 15 cm minimum butt-end diameter logs. Over 80% of the logs were classified to No.2 or No.3 visual grade group. Upon sawing total lumber yield was 55.2%, 39.9% for structural glulam lamina, 7.2% for louver, and 8.1% for miscellaneous use. The final lumber yield for manufacturing structural glulam, after cross-cutting to eliminate knots and finger jointing, was only 15.3%. To enhance this manufacturing yield requires that the rate of knot-included lumber used as lamina be raised. However arrangement of the knot-included lamina, whose mechanical properties need to be accurately evaluated, must be optimized to minimize any reduction to the structural glulam strength. The log quality and lumber yield of pitch pine evaluated in this study are expected to facilitate proper planning for wood product manufacture in the Korean lumbering and glulam industrial field, which has not previously dealt with this species.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.2 no.2
• /
• pp.79-86
• /
• 1999

This study was carried out to estimate the area of damaged forest and the volume of stand tree in burned area, Mt. Weol-A in eastern Chinju, Korea using digital maps derived from supervised classification of Landsat thematic mapper(TM) imagery as reference data. Criterion laser estimator and WinDENDRO$^{tm}$(v. 6.3b) system as a computer-aided tree ring measuring system were used to measure a volume and age of sampled tree. The sample site had been chosen in unburned areas having the same terrain condition and forest type of burned areas. The tree age, diameter at breast height, tree height and volume of the sample tree selected from sample site in unburned area were 27years, 20.9cm, 9.7m and $0.1396m^3$ respectively. Total stand volume of sample site was estimated $2.9316m^3$/0.04ha, Damaged stand volume evaluated to about $16,007m^3$ in the burned area of 218.4ha.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.4
• /
• pp.67-74
• /
• 2016

Drone images with high spatial resolution are emerging as an alternative to previous studies with extraction limits in high density forests. Individual tree in the dense forests were extracted from drone images. To detect the individual tree extracted through the image segmentation process, the image segmentation results were compared between the combination of DSM and all R,G,B band and the combination of DSM and R,G,B band separately. The changes in the tree density of a deciduous forest was experimented by time and image. Especially the image of May when the forests are dense, among the images of March, April, May, the individual tree extraction rate based on the trees surveyed on the site was 50%. The analysis results of the width of crown showed that the RMSE was less than 1.5m, which was the best result. For extraction of the experimental area, the two sizes of medium and small trees were extracted, and the extraction accuracy of the small trees was higher. The forest tree volume and forest biomass could be estimated if the tree height is extracted based on the above data and the DBH(diameter at breast height) is estimated using the relational expression between crown width and DBH.

• Journal of Korean Society of Forest Science
• /
• v.102 no.4
• /
• pp.543-549
• /
• 2013

This study was conducted to evaluate age-specific and generalized allometric equations and biomass expansion factors (BEFs) for each tree component across three age-sequence stands (35-year-old, 51-year-old, 62-year-old) of black pine (Pinus thunbergii Parl.) in Jinju, located in the western part of Gyeongnam province, Korea. Biomass in each tree component, i.e. foliage, branch, and stem, was quantified by destructive tree harvesting. Allometric regression equations were significant (P<0.05) with diameter at breast height (DBH) or combination of DBH and height ($DBH^2H$) accounting for 55-98% of the variation (as indicated by coefficients of determination, $R^2$) in aboveground biomass except for foliage biomass of the 62-year-old stand. Generalized allometric equations can be used to estimate the biomass of black pine stands because the slopes of age-specific equations over 35-year-old stands were not significantly different by the age-sequence. The stem density and biomass expansion factor (BEFs) were not significantly different (P>0.05) from different stand ages and ranged from 0.45 to $0.51gcm^{-3}$, and from 1.32 to 1.38, respectively. The results indicate that allometric equations, stem density and aboveground BEFs in the matured black pine over 35-year-old are little influenced by different stand ages.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.3
• /
• pp.320-326
• /
• 2015

Mechanical properties of woods are easily affected by the differences of site environment such as soil and climate changes. In this study, the relationship between mechanical properties and growth factors for Cryptomeria japonica stands in Jeollanam-do Province, Gyeongsangnam-do Province and Je-ju island was analyzed. From these plot data, bending strength, compressive strength, and shear strength were analyzed by Duncan's new multiple range test. The results of Duncan's new multiple range test analysis indicated that bending strength, compression strength, and shear strength were positively related to tree mean height, and stem number per ha, respectively, while they were inversely proportional to DBH (diameter at breast height), elevation, and soil drainage. As a result of this study, there are high correlations between mechanical properties of wood and stand characteristics of Cryptomeria japonica by the region, this findings are very useful to apply the silvicultural treatment system to produce high quality timber as a basic data on this species (distributed in southern region of Korea).

• Journal of Forest and Environmental Science
• /
• v.30 no.4
• /
• pp.383-392
• /
• 2014

In this study, we investigated the Fukiage sand dunes of southern Kyushu, Japan. We surveyed the status of recovery of coastal Japanese black pine forests damaged by pine wilt disease and their disaster prevention capability. We placed two transects: Transect 1, in an area that was severely damaged (80-90% damage rate) by pine wilt disease, and Transect 2, in an area that was mostly undamaged (<10% damage rate). Then, we installed survey lines, carried out vegetation surveys, and measured the depth and pH of humus soil. The survey lines were placed perpendicular to the coastline from the top of the fore-dune to the inland area, and divided into five 50 m sections. Before the point 100 m inland from the top of the fore-dune, the number of invasive hardwoods and of Japanese black pines were small because of the poor growth environment in both transects. Past the 100 m point, the species and number of Japanese black pines and broad-leaved trees increased further inland because the growth environment improved. In addition, the recovery metrics of tree height, diameter at breast height, age, and number in Transect 1 were much lower than those in Transect 2, and the basal area of broad-leaved trees and the depth of humus soil in Transect 1 were lower than in Transect 2, and the soil pH of humus soil in Transect 1 was higher than that of Transect 2. The shape ratio of the Japanese black pine forests indicated that they were insufficient for disaster prevention. Therefore, in order to fully promote the disaster prevention capability of coastal Japanese black pine forests, we should not only focus on prevention of pine wilt disease but also undertake continuous control efforts taking into consideration the sound growth environment such as appropriate density and soil management and removal of invasive broad-leaved trees.

• Plant Resources
• /
• v.5 no.3
• /
• pp.214-223
• /
• 2002

The objective of this study was to understand the conservation of gene resources and provide information for mass selection' of winter bud characters among the selected populations of Kalopanax septemlobus Koidz using analysis of variance(ANOVA) tests. The obtained results are shown below; 1. Ten populations of K. septemlobus were selected for the study of the variation of winter bud characters in Korea. The results of the analysis of variance(ANOVA) tests shows that there were statistically significant differences in all of the winter bud characters among those populations. 2. Correlation analysis shows that width between Height and DBH(Diameter at breast height) characters have negative relationship with all of the characters, as ABL(Apical branch length), ABW(Apical branch width), AWBL(Apical branch winter bud length), AWBW(Apical branch winter bud width), ABT(Apical branch No. of thorns), ABLB(Apical branch No. of lateral bud) and LBL(Lateral branch length), LBW(Lateral branch width), LBT(Lateral branch No. of thorns), LBLB(Lateral branch No. of lateral bud). 3. The result of principal component analysis(PCA) for winter buds showed that the first principal components(PC' s) to the fourth principal component explains about 78% of the total variation. The first principal component(PC) was correlated with AWBW, LWBW, and LBL and the ratio of ABL/ABW and LBL/LBW out of 16 winter bud characters. The second principal component correlated with ABL, ABW, ABLB, LWBL(Lateral branch winter bud length), and LBW and the ratio of AWBL/AWBW. The third principal component correlated with ABL, ABW, LWBL, LBL, and the ratio of LBL/LBW. The fourth principal component correlated with LBL and the ratio of LWBL/LWBW(Lateral branch winter bud width), LBL/LBW. Therefore, these characters were important to analysis of the variation for winter bud characters among selected populations of K. septemlobus in Korea. 4. Cluster analysis using the average linkage method based on 10 selected populations for the 16 winter bud characters of K. septemlobus in Korea showed a clustering into two groups by level of distance 1.1(Fig. 3). As can be seen in Fig. 3, Group I consisted of three areas(Mt. Sori, Mt. Balwang and Mt. Worak) and Group Ⅱ contisted of seven areas(Suwon, Mt. Chuwang, Mt. Kyeryong, Mt. Kaji, Mt. Jiri, Muan, and Mt. Halla). The result of cluster analysis for winter bud characters corresponded well with principal component analysis, as is shown in Fig. 2.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.21 no.4
• /
• pp.65-73
• /
• 2018

Although the road construction in forest is increasing and there is a need for development ecological restoration on deforest area, no consideration has been given to individual trees in there. This study analyzed aerial photographs of deforest area before and after road construction for determining the degree of forest destruction by extracting individual trees. Study area was selected in the sites where are damaged by road construction in GongJu-si, YuSung-gu, and YeongDong-gun. The aerial photograph taken 1979 before construction is panchromatic image of 80cm in GSD (Ground Sample Distance) and other photograph taken 2016 after construction is multi-spectral image of 10cm in GSD. In order to minimize the difference of GSD, we conducted image re-sampling process for setting to same GSD for the two photographs. After that we carried out visual interpretation method for determining to change of individual tree. The result found that for GongJu-si of the number of individual tree was 1,014 in 1979 and 886 in 2016, which decreased by 128 (12.6%) and the average width of those decreased from 5.77m to 5.75m by 0.47%. In case of YoungDong-gun, the number of it was 761 in 1979 and 746 in 2016, which decreased by 2.0% and the average width of it decreased from 8.99mm to 8.90m by 1.1%. Lastly in case of YuSung-gu, the number of it was 1,578 in 1979 and 988 in 2016, which decreased by 37.4% and the average width of it decreased from 7.09m to 6.65m by 6.21%. these result imply that road construction causes destruction of forests. Since there are limitations such as errors due to researcher, it is necessary to construct a quantitative analysis method for the change of the deforest area. It is need to study the method of extracting individual tree in deforest area more accurately using high-resolution image of GSD 10cm or more as well. This study can be used as a basic data for the ecological restoration of the deforest area considering characteristics of individual tree such as height, diameter at breast height, and biomass.