• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.2
• /
• pp.295-310
• /
• 2014

DCS (Distributed Control System), the main control system of power plants, is an automated system for enhancing operational efficiency by monitoring, tuning and real-time operation. DCS is becoming more intelligent and open systems as Information technology are evolving. In addition, there are a large amount of investment to enable proactive facility management, maintenance and risk management through the predictive diagnostics. However, new upcoming weaponized malware, such as Stuxnet designed for disrupting industrial control system(ICS), become new threat to the main control system of the power plant. Even though these systems are not connected with any other outside network. The main control systems used in the power plant usually have been used for more than 10 years. Also, this system requires the extremely high availability (rapid recovery and low failure frequency). Therefore, installing updates including security patches is not easy. Even more, in some cases, installing security updates can break the warranty by the vendor's policy. If DCS is exposed a potential vulnerability, serious concerns are to be expected. In this paper, we conduct the penetration test by using NESSUS, a general-purpose vulnerability scanner under the simulated environment configured with the Ovation version 1.5. From this result, we suggest a log analysis method to detect the security infringement and react the incident effectively.

• Journal of Society of Preventive Korean Medicine
• /
• v.19 no.3
• /
• pp.45-55
• /
• 2015

Objective : The aim of this study was to survey the present utilization of pattern identification(PI) in the clinical field among Korean Medicine Doctors. Method : This survey was conducted from Oct. 1 to Oct. 31, 2014 by face-to-face interview using structured questionnaire. The subjects were 400 korean medicine doctors who worked in hospitals or clinics. The questionnaire consisted of two sections - a demographics section(i.e., sex, age, clinical experience, place of work, residence and so on) and the main research section(i.e., the PI utilization rate, the utilization of PI systems, the utilization of PI in the clinical domain and in the treatment domain, the correlation between utilization PI and so on). Results : This study revealed that subjects used the PI to 66.7% of their patients on average. The utilization rate of PI in patients was significantly higher for female physicians than for male physicians, for physicians worked in clinics than for physicians who worked in hospitals and for physicians with more than 10 years clinical experience than for physicians with less than 10 years clinical experience. In the utilization of PI systems, Visceral PI was most as 92.0%. There were significant difference on the PI utilization rate according to utilization of Meridian and Collateral PI, Triple Energizer PI, Defense, Qi, Nutrient and Blood PI, Six-Meridian PI and Six Excesses PI. As a result of analysing the PI utilization rate by clinical domain and in the treatment domain, the Treatment and the Drug Treatment showed the highest values. Among utilized PI systems, the correlation coefficients between Defense, Qi, Nutrient and Blood PI and Triple Energizer PI showed the highest value, but the correlation coefficients between Sasang Constitutional Medicine with the each PI showed substantially lower value. Conclusion : The results of this study demonstrate that usage of PI was higher than usage of U code(in KCD) usage in clinical field. we suggested that additional studies on using PI and developing more appropriate standardized tool should be conducted to widen scope of PI's utilization.

• Journal of the Korea Computer Industry Society
• /
• v.6 no.2
• /
• pp.357-364
• /
• 2005

The prefabricated type used generally in Korea to join cable runs on new installations or to repair broken Cable runs on existing installations, because installation is very simple and save time. This type is a permanent, shielded and submersible cable joint for direct burial or vault application. It confirms to the requirements of IEEE std. 404-1993 by factory testing, but many problems of insulated cable systems are caused by internal defects of the joint part which have to be mounted ensile. Faults arise from impurities or voids. A suitable solution for a monitoring of cable joints during the after-laying test and service is partial discharge detection. Specimen obtained 1mm thickness from the insulation of real power cable and cable joint. <중략>The partial discharges are measured to determine their time dependence for 60 minutes and the influence of applied electrical stress under 30kV. $\Phi-q-n$ properties were measured using detection impedance, high pass filter and computerized data acquisition system. Statistic Value like maximum charge, repetition rate, average charge, etc. are calculated. It is possible to quantitative analysis of $\Phi-q-n$ properties from this statistic value and pattern analysis.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10b
• /
• pp.1705-1711
• /
• 1991

On-line fault detection and diagnosis has an increasing interest in a chemical process industry, especially for a process control and automation. The chemical process needs an intelligent operation-aided workstation which can do such tasks as process monitoring, fault detection, fault diagnosis and action guidance in semiautomatic mode. These tasks can increase the performance of a process operation and give merits in economics, safety and reliability. Aiming these tasks, series of researches have been done in our lab. Main results from these researches are building appropriate knowledge representation models and a diagnosis mechanism for fault detection and diagnosis in a chemical process. The knowledge representation schemes developed in our previous research, the symptom tree model and the fault-consequence digraph, showed the effectiveness and the usefulness in a real-time application, of the process diagnosis, especially in large and complex plants. However in our previous approach, the diagnosis speed is its demerit in spite of its merits of high resolution, mainly due to using two knowledge models complementarily. In our current study, new knowledge representation scheme is developed which integrates the previous two knowledge models, the symptom tree and the fault-consequence digraph, into one. This new model is constructed using a material balance, energy balance, momentum balance and equipment constraints. Controller related constraints are included in this new model, which possesses merits of the two previous models. This new integrated model will be tested and verified by the real-time application in a BTX process or a crude unit process. The reliability and flexibility will be greatly enhanced compared to the previous model in spite of the low diagnosis speed. Nexpert Object for the expert system shell and SUN4 workstation for the hardware platform are used. TCP/IP for a communication protocol and interfacing to a dynamic simulator, SPEEDUP, for a dynamic data generation are being studied.

• Journal of KSNVE
• /
• v.6 no.3
• /
• pp.341-347
• /
• 1996

Vibration analysis is one of the most powerful tools available for the detection and isolation of incipient faults in mechanical systems. The methods of vibration analysis in use today and under continuous study are broad band vibration monitoring, time domain analysis, and frequency domain analysis. In recent years, great interest has been generated concerning the use of time- frequency repesentation and its application for a machinery diagnostics and condition monitoring system. The objective of the study described in this paper was to develop a new diagnostic tool for the rotating machinery. This paper introduces a new time frequency representation. Directional Winger-Ville Distribution, which analyese the time-frequency structure of the rotating machinery vibration.

• Journal of the Korea Computer Industry Society
• /
• v.6 no.2
• /
• pp.279-286
• /
• 2005

The prefabricated type used generally in Korea to join cable runs on new installations or to repair broken Cable runs on existing installations, because installation is very simple and save time. This type is a permanent, shielded and submersible cable joint for direct burial or vault application. It confirms to the requirements of IEEE std. 404-1993 by factory testing, but many problems of insulated cable systems are caused by internal defects of the joint part which have to be mounted ensile. Faults arise from impurities or voids. A suitable solution for a monitoring of cable joints during the after-laying test and service is partial discharge detection. <중략> $\Phi-q-n$ properties were measured using detection impedance, high pass filter and computerized data acquisition system. Statistic Value like maximum charge, repetition rate, average charge, etc. are calculated. It is possible to quantitative analysis of $\Phi-q-n$ properties from this statistic value and pattern analysis.

• Journal of the Korea Convergence Society
• /
• v.2 no.4
• /
• pp.15-19
• /
• 2011

The transportation and logistics industries, the constructions of a green transport methods for logistics systems are presented. They aims the greenhouse gas emissions 37% savings compared to BAU(Business As Usual) for a green growth of national strategy by 2020. An eco-driving training for truck drivers is a typical way. However there are few studies such as the integrated data collection automatically and the diagnostic Assessments and monitoring methods of logistics network status to show the effects of the eco-driving. To solve this problem, this paper provides previous research on logistics network diagnostics assessments and monitoring service and eco-driving. Then this paper shows developments of the logistics network diagnostic assessments and monitoring service business flow to promote eco-driving behaviors for truck drivers based on a smart phone application. Also, it shows an efficiency through an application results in field test.

• The Journal of Korean Medicine
• /
• v.37 no.1
• /
• pp.125-134
• /
• 2016

Objectives: The aim of this study is to develop diagnostic questionnaires for the lumbar movement system impairment syndrome. Methods: We had reviewed the previous study and literature and organized various checkable items for differential diagnosis of five different lumbar movement system impairment syndromes. Next, we selected items which can be developed as questionnaire items. Finally, we conducted face validity study with eight Korean medicine doctors and survey research for the importance score of the items with three experts. Results: We developed a diagnostic questionnaire as followings: 6 items for lumbar extension syndrome; 5 items for lumbar flexion syndrome; 6 items for lumbar rotation syndrome. With the 2 rounds of survey research, we could bridge the differences of the importance score of each items. Conclusions: Questionnaire for the diagnosis of movement system impairment syndrome was developed. With this questionnaire, objective diagnosis of lumbar movement system impairment syndrome can be expected. This tool may also be used for detecting sub-health status of musculoskeletal systems.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.5
• /
• pp.417-423
• /
• 2017

This paper intend to implement monitoring systems for individual customized diagnostics to maintain ongoing disease management to promote human health. Analyze the threshold of a measured biological signal using a number of measuring sensors. Performance assessment revealed that the SVM algorithm for bio-signal analysis showed an average error rate of 2 %. The accuracy of the classification is 97.2%, and reduced the maximum of 19.2% of the storage space when you split the window into 5,000 pieces. Out of the total 5,000 bio-signals, 84 results showed that results from the system were differently the results of the expert's diagnosis and showed about 98 % accuracy. However, the results of the monitoring system did not occur when the results of the monitoring system were lower than that of experts. And About 98% accuracy was shown.

• CELLMED
• /
• v.6 no.4
• /
• pp.23.1-23.6
• /
• 2016

With the rapid developments in nanotechnology, an increasing number of nanomaterials have been applied in various aspects of our lives. Recently, pharmaceutical nanotechnology with numerous advantages has growingly attracted the attention of many researchers. Zinc oxide nanoparticles (ZnO-NPs) are nanomaterials that are widely used in many fields including diagnostics, therapeutics, drug-delivery systems, electronics, cosmetics, sunscreens, coatings, ceramic products, paints, and food additives, due to their magnetic, catalytic, semiconducting, anti-cancer, anti-bacterial, anti-inflammatory, ultraviolet-protective, and binding properties. The present review focused on the recent research works concerning role of ZnO-NP on inflammation. Several studies have reported that ZnO-NP induces inflammatory reaction through the generation of reactive oxygen species by oxidative stress and production of inflammatory cytokines by activation of nuclear factor-${\kappa}B$ ($NF-{\kappa}B$). Meanwhile, other researchers reported that ZnO-NP exhibits an anti-inflammatory effect by inhibiting the up-regulation of inflammatory cytokines and the activation of $NF-{\kappa}B$, caspase-1, $I{\kappa}B$ $kinase{\beta}$, receptor interacting protein2, and extracellular signal-regulated kinase. Previous studies reported that size and shape of nanoparticles, surfactants used for nanoparticles protection, medium, and experimental conditions can also affect cellular signal pathway. This review indicated that the anti-inflammatory effectiveness of ZnO-NP was determined by the nanoparticle size as well as various experimental conditions. Therefore, the author suggests that pharmaceutical therapy with the ZnO-NP is one of the possible strategies to overcome the inflammatory reactions. However, further studies should be performed to maximize the anti-inflammatory effect of ZnO-NP to apply as a potential agent in biomedical applications.